胜利原油对褐牙鲆(Paralichthys olivaceus)幼鱼鳃Na~+-K~+-ATPase活性的影响

以胜利原油为污染物对褐牙鲆幼鱼鳃丝Na~+-K~+-ATPase活力的影响进行了研究.实验结果表明,低浓度的胜利原油对实验褐牙鲆幼鱼鳃丝的Na~+-K~+-ATPase活力的活性有诱导作用,随着浓度的升高对其活性影响越大,并随着曝油时间的延长先升高然后降低到一个相对稳定的数值.当实验油浓度为1.25 mg/L时,与对照组有极显著性差异(P<0.01).比较不同实验组在相同暴露时间鳃丝Na~+-K~+-ATPase活力,可以说明实验鱼参与能量代谢、物质运输等重要生化过程的能力是一定的.与对照组相比较,实验第3 d的数值极显著差异(P<0.01).本研究为保护海洋生态环境和渔业资源提供基础资料.     

液固比对含重金属水泥熟料制品中重金属释放的影响

通过模拟煅烧试验制取水泥熟料,参照JGJ 55-2000（《普通混凝土配比设计规程》）制取混凝土样品,参考SR003.1和NEN 7375浸出试验,分别研究液固比对粒状及块状混凝土样品中重金属（Cr、Ni和As）释放的影响。结果表明,在不同液固比条件下粒状混凝土中的重金属浸出浓度为Cr>Ni>As,Cr、As浸出浓度基本保持不变,分别为2 500 μg/L左右和5～6 μg/L,Ni在液固比（L∶S）<6时,浸出浓度随着液固比的增加而降低,在L∶S>6时,浸出浓度较稳定,为35.7～41.5 μg/L;浸出量均随着液固比的增加而增大。液固比（L∶S）<10时,块状混凝土中重金属累积释放量及扩散系数均随液固比的增加而增大,当L∶S>10时两者基本保持不变。     

长江口地区的盐水入侵灾害及变化趋势

本文在总结长江口地区现状盐水入侵时空变化规律的基础上,着重分析了在未来海平面上升、长江东线南水北调和三峡水利枢纽工程以及长江口北支综合整治等因素影响下,南支河段盐水入侵强度的变化趋势。     

表面活性剂加强动电技术去除污泥中铜和镉

以实际城市污泥为研究对象,通过采用表面活性剂作为阴极液,并考虑阴极液pH值、表面活性剂类型和电压3种因素对动电技术去除污泥中重金属(铜和镉)的影响,选用正交试验确定最佳试验条件.结果表明,采用表明活性剂作为阴极液加强动电技术去除污泥中重金属足可行的,铜和镉的去除率分别达到11.1%～52.6%和9.1%～46.7%.通过对正交试验结果进行极差和方差分析,试验的最佳条件为:电压为20 V,阴极液加入十六烷基三甲基氯化铵并控制pH值为4～6.表面活性剂的类型对动电技术去除镉具有显著影响.其中,表面活性剂类型对动电过程的影响最大,阴极液pH值次之,电压影响最小.     

The sedimentation capabilities of hexadecyltrimethylammonium-modified montmorillonites

Natural montmorillonite was modified with a quaternary ammonium compound, hexadecyltrimethylammonium (HDTMA). The sedimentation capabilities of unmodified and modified montmorillonites were then investigated. The sedimentation velocity of modified montmorillonites increased if the amounts of adsorbed HDTMA were from 0.3 to 1.0 times the cation exchange capacitity (CEC). It also emerged that the sedimentation capability of modified montmorillonites was improved and that the variously CEC-modified montmorillonites had similar sedimentation capabilities after they had sorbed organic matter from oily wastewater. Thus, modified montmorillonites (especially 0.5 CEC treatment) had good sedimentation capabilities for sorbing organic substance and can act as carriers in wastewater biotreatment.     

污水低氧脱氮机制及其应用研究进展

阐述了污水低氧脱氮的基本原理,即抑制或去除亚硝酸盐氧化菌(NOB),同时保留氨氧化菌(AOB),并保持其活性;探讨了污水低氧脱氮实现途径;详细介绍了几种典型的污水低氧脱氮工艺(短程硝化(SHARON)工艺、厌氧氨氧化(ANAMMOX)工艺、好氧反氨化(DEMON)工艺、低氧自养硝化反硝化(OLAND)工艺、甲烷营养型硝化反硝化工艺和亚硝酸盐型完全自养脱氮(CANNON)工艺)的应用研究进展;最后对污水低氧脱氮处理工艺的工程运用进行了展望.     

二段生物接触氧化工艺在中水回用中的特性研究

以规模小区生活污水为水源,对采用聚丙烯网状填料和强化炉渣组合填料的二段生物接触氧化工艺（以下简称二段法）进行了试验研究,试验针对本工艺的各项技术指标、影响因素以及各相关参数进行了较系统的试验测试。结果表明,反应器在第一接触氧池HRT为20 min、气水比为6∶1和第二接触氧池HRT为25 min、气水比为5∶1条件下,接触氧化池达到最佳降碳条件;反应器在第一接触沉池上升流速5.5 m/h和第二接触沉池上升流速4.5 m/h条件下,接触沉淀池达到最佳处理条件。     

重铬酸钾─三氯化钛法测定水中溶解氧

介绍了三氯化钛（ＴｉＣｌ３）与氧反应，以钨酸钠（Ｎａ２ＷＯ４）作指示剂，用重铬酸钾溶液滴定过剩三氯化钛来测定水中溶解氧的方法。本法与碘量法比较，结果表明方法准确、快速，适合于水样中溶解氧的测定     

多元信息综合的市县国土空间规划空间功能识别方法

空间功能识别是确定国土空间规划空间开发保护格局的关键环节,理论和实践意义重大。基于土地利用和地表覆盖现状、精细化DEM、地形单元等基础地理信息,水、生态、环境、灾害等专题数据,社会统计数据等多元信息,利用空间分析、多元统计、计量模型、基于规则的分类模型等技术方法,从多元信息综合集成和自动分类识别的角度,研究构建了一套市县国土空间规划空间主导功能识别的关键技术与方法,并对榆林市域进行空间功能分区。研究表明：本文方法有效将地理实体单元、功能评价指标综合于统一的地域单元,保证了空间功能分类识别的准确性;通过自动分类算法建模,实现空间功能识别的自动化,提高了国土空间规划的客观性和工作效率。     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.