Validity and reliability of a job factors questionnaire related to the work tasks of physical therapists

Physical therapists engage in work tasks that expose them to occupational risk factors related to musculoskeletal disorders. Due to the gap in the literature on instruments focused on those workers, this study adapted a job factors questionnaire to physical therapists, and assessed its psychometric properties. The questionnaire was adapted and its content validity was established. The psychometric properties were evaluated among 142 physical therapists. Reliability was verified using the temporal-stability design and internal consistency. Construct validity was assessed with the known-groups technique. Test-retest results demonstrated intraclass correlation coefficients between .82 and .90 (p < .001). Cronbach's α of .91 verified the reliability of the questionnaire. The known-groups technique demonstrated a statistically significant difference on the scores of the items when physical therapists were compared to office workers. The results indicated that the adapted questionnaire had acceptable psychometric properties for assessing problematic job factors among physical therapists working in hospitals.     

Analysis of bicycle crashes in Sweden involving injuries with high risk of health loss

Objective: The objectives of the present article were to (a) describe the main characteristics of bicycle crashes with regard to the road environment, crash opponent, cyclist, and crash dynamics; (b) compare individuals who describe their health after the crash as declined with those who describe their health as not affected; and (c) compare the number of injured cyclists who describe their health as declined after the crash with the predicted number of permanent medical impairments within the same population.

Methods: A sample of individuals with specific injury diagnoses was drawn from the Swedish Traffic Accident Data Acquisition (STRADA) database (n?=?2,678). A survey form was used to collect additional information about the crash and the health-related outcomes. The predicted number of impaired individuals was calculated by accumulating the risk for all individuals to sustain at least a 1% permanent medical impairment, based on the injured body region and injury severity.

Results: Nine hundred forty-seven individuals (36%) responded, of whom 44% reported declined health after the crash. The majority (68%) were injured in single bicycle crashes, 17% in collisions with motor vehicles, and 11% in collisions with another cyclist or pedestrian. Most single bicycle crashes related to loss of control (46%), mainly due to skidding on winter surface conditions (14%), followed by loss of control during braking (6%). There was no significant difference in crash distribution comparing all crashes with crashes among people with declined health. The predicted number of impaired individuals (n?=?427) corresponded well with the number of individuals self-reporting declined health (n?=?421).

Conclusions: The types of crashes leading to health loss do not substantially differ from those that do not result in health loss. Two thirds of injuries leading to health loss occur in single bicycle crashes. In addition to separating cyclists from motorized traffic, other preventive strategies are needed.     

Safety I–II,resilience and antifragility engineering: a debate explained through an accident occurring on a mobile elevating work platform

Occupational health and safety (OHS) represents an important field of exploration for the research community: in spite of the growth of technological innovations, the increasing complexity of systems involves critical issues in terms of degradation of the safety levels. In such a situation, new safety management approaches are now mandatory in order to face the safety implications of the current technological evolutions. Along these lines, performing risk-based analysis alone seems not to be enough anymore. The evaluation of robustness, antifragility and resilience of a socio-technical system is now indispensable in order to face unforeseen events. This article will briefly introduce the topics of Safety I and Safety II, resilience engineering and antifragility engineering, explaining correlations, overlapping aspects and synergies. Secondly, the article will discuss the applications of those paradigms to a real accident, highlighting how they can challenge, stimulate and inspire research for improving OHS conditions.     

Colonization and early succession on artificial hard substrata by meiofauna

An experiment was undertaken at Farol Island, Brazil, to examine colonization of bare aluminium surfaces by microbes and meiofauna. It was hypothesized that a primary source of meiofaunal colonists was sediment resuspended during upwelling events, two of which occurred during the experiment. Microbial biofilms formed on the experimental substrata within 1 day, and continued to develop throughout the experimental period. Among meiofaunal groups copepods also appeared on the first day, and nematodes on the second. Meiofaunal community structure developed in three main phases: an initial phase of 2 days, characterized by low abundances of copepods; a second phase during the first upwelling period characterized by higher abundances of copepods and also by turbellarians; and a third phase from day 13 onwards characterized by relatively stable abundances of a range of taxa including copepods, cirripedes, nematodes and ostracods. Nematode assemblages also developed in three phases, but with different timings coinciding with upwelling events: an initial phase, from the beginning of the experiment to day 9, characterized by few species and low (or no) abundances; a second phase following the first upwelling characterized by moderate abundances of Chromadorina, Chromadorella, Daptonema and Euchromadora sp. 3; a third phase following the second upwelling period (from day 26 onwards) in which Daptonema disappeared and the assemblage was characterized by moderate to high abundances of Euchromadora (species 1 and 2) and Chromadorella. Although shifts in nematode assemblage structure coincided with upwelling events no evidence was found for sediments being the primary source of colonizers on the aluminium substrata, in contrast to our hypothesis.     

Exposure to Selected Heavy Metals Through Water Ingestion in an Area Under the Influence of Tanneries

This study evaluated the potential toxicological risk posed to human health due to the exposure to heavy metals by water ingestion in an area affected by tanneries – the Cadeia-Feitoria hydrographic basin (Brazil). River water was collected at 10 sites, every 3 months, from July 1999 to April 2000. After acid digestion, total metal concentration was determined by inductively coupled plasma optical emission spectrometry (Cd, Cu, Cr, Ni, Zn), flame atomic absorption (Al, Fe, Pb, Mn), or cold vapor atomic absorption spectrometry (Hg). Cr(VI) was complexed with diphenyl-carbazide and detected by UV–vis spectrometry. In order to quantify the risk of exposure, the risk assessment methodology employed by the Environmental Protection Agency of the United States was applied at a screening level. The assumed scenarios included extreme exposure patterns (ingestion of untreated water, conversion of Cr(III) to Cr(VI), temporal peaks of pollution). Fe, Al, Cd, Hg, and Pb were not included in the risk analysis, since they showed a low toxicity potential or were undetected in the samples. The selected metals presented Hazard Quotients < 1, in the following order of increasing risk: Cu < Cr(III) < Zn < Ni < Mn < Cr(VI). Hazard indexes, representing the additive effect of contaminants, were also low in the basin (< 1), but comparatively increased in the lower reach of Feitoria and Cadeia Rivers. Although noncarcinogenic risk levels did not suggest possible adverse toxicological effects to the human population, a considerable deviation from background conditions was observed downstream the area where tanneries are mainly located.     

Dominance,prior occupancy,and winter residency in the great tit (Parus major)

Summary This study reports an aviary experiment aimed at determining what affects social dominance in the great tit (Parus major), especially why older birds (adults) in nature normally dominate younger ones (juveniles). When birds were matched with respect to age, prior residency determined dominance. Without a difference in prior residency older birds dominated younger ones. However, when juvenile birds had a prior residency advantage over adult birds, they often became dominant. This was especially so when the juvenile bird was large relative to the adult bird. When a resident juvenile male was also consorted by a female, he became dominant over an adult male on most occasions. An experiment where the dominant bird was removed and later returned to the aviary failed to produce more than one shift in dominance. However, the proportion of reversals in dominance interactions increased with separation time. It is argued that the fact that dominance depends on prior residency selects for winter residency in the great tit.Offprint requests to: H.G. Smith     

Human digit ratios depend on birth order and sex of older siblings and predict maternal fecundity

In men, the length ratio of the second to fourth finger (2D:4D) is smaller, while the length of the fourth finger relative to body height (4D:H) is larger than in women. Inter- and intrasexual variations in 2D:4D and 4D:H may depend on variation in fetal androgen and oestrogen environment. As maternal physiology varies with parity and is differentially affected by gestation of either sex, offspring 2D:4D and 4D:H may change according to sex and number of older siblings and may predict subsequent maternal performance. We analysed 2D:4D and 4D:H in Caucasian university students. 2D:4D was smaller and 4D:H was larger in males than in females, but no sexual dimorphism existed in 2D:H. In males, length ratios did not vary with birth order. 2D:4D became more masculine with increasing proportion of males among older siblings, and 2D:4D and 4D:H became more feminine as the number of older sisters increased. In females, length ratios did not vary with the number of older sisters or brothers. 2D:4D was also not related to birth order, but 4D:H became more masculine with birth order. In females, residual maternal fecundity (number of maternal offspring after the participant) decreased as 4D:H became more masculine. These findings are partly consistent with those from previous studies and suggest that maternal fecundity co-varies with length ratios and thus possibly fetal hormone environment of older offspring. 2D:4D and 4D:H may therefore represent powerful tools to investigate the relationships between fetal environment, offspring phenotype and maternal life history at mechanistic and evolutionary levels.     

Chemical defense: incorporation of diet-derived pyrrolizidine alkaloid into the integumental scales of a moth (<Emphasis Type="Italic">Utetheisa ornatrix</Emphasis>)

Summary. Evidence is presented that pyrrolizidine alkaloid acquired by Utetheisa ornatrix (Lepidoptera, Arctiidae) as a larva from Crotalaria foodplants is incorporated in part into the scales of the adult. A single forewing of a male or female moth may contain in the order of 6 to 13 g monocrotaline in its scale cover or about 1 to 2% of the moths systemic monocrotaline content. Based on estimates of the number of scales per forewing, the monocrotaline content of individual scales is calculated to be in the order of 0.1 and 0.2 ng monocrotaline per male and female scale, respectively. This amounts to concentrations of about 1 and 3%, values roughly at a par with the average systemic concentration (0.5-0.6%) previously determined for monocrotaline in Utetheisa. It is argued that the presence of pyrrolizidine alkaloid in the moths scale coating could account for the promptness with which adult Utetheisa are rejected by spiders. It is suggested further that chemical impregnation of scales with substances deterrent to predators may be more widespread among insects than generally assumed.     

A reliable indicator of female fecundity: the case of the yellow belly in<Emphasis Type="Italic"> Knipowitschia panizzae</Emphasis> (Teleostei: Gobiidae)

A large body of research has developed on male ornaments and their role in sexual selection while female ornaments have been less investigated. This study focused on the presence, function, and possible role of a sexually dimorphic nuptial trait as an indicator of female quality in a fish species presenting conventional sex roles: the yellow patch on the belly of Knipowitschia panizzae females. Aquarium spawning experiments demonstrated that this ornament is due to dermal pigments, is displayed only when the female is ready to spawn, and is switched off within minutes from the end of egg deposition. This sexual trait is variable in size among females and indicates female fecundity relative to her own body size. As a consequence, female yellow belly appears to be a reliable indicator of female quality as measured by current fecundity. Field data on natural nests highlights that males usually perform parental care on only one egg batch at a time. The modality of egg deposition suggests that males may be limited in their potential reproductive rates by environmental factors. Male limitations in egg care could favour male choosiness and the evolution of female nuptial displays.Communicated by R. Cattaneo-Vietti, Genova