Steel mill waste application in soil: dynamics of potentially toxic elements in rice and health risk perspectives

Environmental Science and Pollution Research - Potentially toxic elements (PTEs) are of great concern in steel mill wastes. Therefore, in order to use them as potential fertilizers in soil, risk...     

Toxic and genotoxic impact of fibrates and their photoproducts on non-target organisms

Lipid regulators have been detected in effluents from sewage treatment plants and surface waters from humans via excretion. This study was designed to assess the ecotoxicity of fibrates, lipid regulating agents. The following compounds were investigated: Bezafibrate, Fenofibrate and Gemfibrozil and their derivatives obtained by solar simulator irradiation. Bioassays were performed on bacteria, algae, rotifers and microcrustaceans to assess acute and chronic toxicity, while SOS Chromotest and Ames test were utilized to detect the genotoxic potential of the investigated compounds. The photoproducts were identified by their physical features and for the first risk evaluation, the environmental impact of parental compounds was calculated by Measured Environmental Concentrations (MEC) using the available data from the literature regarding drug occurrence in the aquatic environment and the Predicted No Effect Concentrations (PNEC) based on our toxicity data. The results showed that acute toxicity was in the order of dozens of mg/L for all the trophic levels utilized in bioassays (bacteria, rotifers, crustaceans). Chronic exposure to these compounds caused inhibition of growth population on rotifers and crustaceans while the algae seemed to be slightly affected by this class of pharmaceuticals. Genotoxic and mutagenic effects were especially found for the Gemfibrozil photoproduct suggesting that also byproducts have to be considered in the environmental risk of drugs.     

Antimicrobial activity of thin metallic silver flakes, waste products of a manufacturing process

The aim of the research was to develop new products and processes from a manufacturing waste from an Italian metallurgic company. The company produced thin silver metallic films and the production scraps were silver flakes. The possibility to use the silver flakes in water disinfection processes was studied. The antimicrobial activity of the flakes was investigated in batch using Escherichia coli as Gram-negative microorganism model. The flakes did not show any antimicrobial activity, so they were activated with two different processes: thermal activation in reducing atmosphere and chemical activation, obtaining, respectively, reduced flakes (RF) and chemical flakes (CF). The flakes, activated with either treatment, showed antimicrobial activity against E. coli. The kill rate was dependent on the type of activated flakes. The chemical flakes were more efficient than reduced flakes. The kill rate determined for 1 g of CF, 1.0 ± 0.2 min⁻¹, was greater than the kill rate determined for 1 g of RF, 0.069 ± 0.004 min⁻¹. This was confirmed also by the minimum inhibitory concentration values. It was demonstrated that the antimicrobial capability was dependent on flakes amount and on the type of aqueous medium. Furthermore, the flakes maintained their properties also when used a second time. Finally, the antimicrobial activities of flakes were tested in an effluent of a wastewater treatment plant where a variety of heterotrophic bacteria were present.     

Silver impregnated carbon for adsorption and desorption of elemental mercury vapors

The Hg0 vapor adsorption experimental results on a novel sorbent obtained by impregnating a commercially available activated carbon (Darco G60 from BDH) with silver nitrate were reported. The study was performed by using a fundamental approach, in an apparatus at laboratory scale in which a synthetic flue gas, formed by Hg0 vapors in a nitrogen gas stream, at a given temperature and mercury concentration, was flowed through a fixed bed of adsorbent material. Breakthrough curves and adsorption isotherms were obtained for bed temperatures of 90, 120 and 150°C and for Hg0 concentrations in the gas varying in the range of 0.8–5.0 mg/m3. The experimental gas-solid equilibrium data were used to evaluate the Langmuir parameters and the heat of adsorption. The experimental results showed that silver impregnated carbon was very effective to capture elemental mercury and the amount of mercury adsorbed by the carbon decreased as the bed temperature increased. In addition, to evaluate the possibility of adsorbent recovery, desorption was also studied. Desorption runs showed that both the adsorbing material and the mercury could be easily recovered, since at the end of desorption the residue on solid was almost negligible. The material balance on mercury and the constitutive equations of the adsorption phenomenon were integrated, leading to the evaluation of only one kinetic parameter which fits well both the experimentally determined breakthrough and desorption curves.     

Seasonal fluctuations of DDTs and PCBs in zooplankton and fish of Lake Maggiore (Northern Italy)

Concentrations of DDTs and PCBs were determined in the zooplankton and in three different fish species (shad, whitefish and roach) collected seasonally during 2009 and 2010 in three sites in Lake Maggiore, a south-alpine lake that has been contaminated by DDT since 1996. As previously observed in 2008, even during 2009 DDTs concentrations were higher in zooplankton than in fish, probably due to the very unstable situation of the lake still influenced by local inputs. The situation changed in 2010, when all DDT compounds increased in fish to levels much higher than those measured in zooplankton. Biomagnification was statistically demonstrated for pp′DDE in all the three fish species, indicating a probable signal of recovery of the lake.Although with respect to total PCBs we observed that the contamination levels varied across time periods and across fish species, biomagnification was evident from zooplankton to fish both in 2009 and in 2010. As concern individual PCBs, biomagnification from zooplankton to all three fish species was significant for PCB 153 and PCB 138.     

Estrogenic activity of pharmaceuticals in the aquatic environment

In the last years pharmaceuticals have aroused great interest as environmental pollutants for their toxic effects towards non target organisms. This study wants to draw attention to a further adverse effect of drugs, the endocrine interference. The most representative drugs of the widespread classes in environment were investigated. The YES-test and the E-screen assay were performed to detect the capability of these substances to bind the human estrogenic receptor α (hERα) in comparison with 17β-estradiol. Out of 14 tested pharmaceuticals, 9 were positive to YES-assay and 11 were positive to E-screen assay; in particular, Furosemide and the fibrates (Bezafibrate, Fenofibrate and Gemfibrozil) gave the maximal estrogenic response. Tamoxifen showed its dual activity as agonist and antagonist of hERα.     

Origin and transport of U and Ra in riverine,estuarine and marine sediments of the Krka River,Croatia

Spatial distribution of ²³⁸U and ²²⁶Ra activities in sediment columns along the Krka River and estuary, were studied using gamma spectrometry. Markedly different ²³⁸U and ²²⁶Ra activities between riverine, estuarine and marine sediments were observed. Distribution of these radionuclides, as well as their anthropogenic and natural origin, was evaluated by activity measurements, taking into account sedimentation rates estimated by ¹³⁷Cs distribution in sediment columns.     

Choice of parameters for passive shielding of power-frequency magnetic fields

Epidemiological studies suggesting the possibility of harmful effects on human (specifically children’s leukaemia) due to long-term exposure to magnetic fields of extremely low frequency (e.g. 50/60 Hz) and relatively low values (i.e. over the microtesla range) have stirred high activity in the topic of magnetic field mitigation. To reduce these fields, it is common to use passive metal screens (e.g. plates made of aluminium or steel). To design them, effective and fast numerical computations are highly desirable. In this article, a method is presented, which computes various parameters of screens in a given shielding problem and yields magnetic field distribution and shielding factors. The method takes into consideration the 3D field distribution and is able to solve systems with large aspect ratios (thin thickness in comparison with its other dimensions); this is a common problem where other methods such as finite elements often experience difficulties. The presented method computes separately the field inside and outside the screens. Afterwards, the solutions are “stitched” together along the border of the subregions. Two practical examples are given of the developed numerical method.