A laboratory study on migration of K+ in a two-layer landfill liner system.

Contaminant transport through the clay liner and the underIying secondary leachate drain layer (SLDL) in landfills was studied through a laboratory test, and analysis method on the transport of K+ in a two-layer soil system. The soils used for this study were Ariake clay and the underlying layer, Shirasu soil from the Kyushu region of Japan, representing the clay liner material and SLDL material, respectively. The effective diffusion coefficients (De) of the selected target chemical species, potassium (K+) for the Ariake clay and Shirasu soil were back-calculated using a computer program, and it was found that values of De derived from this study were consistent with those previously published. The hypothesis that the mechanical dispersion process can be negligible has been proved to be reasonable based on both the observation that the predicted values fit the experimental data and the analyses of two dimensionless parameters. Parametric analysis showed the transport of K+ through the soils is controlled by advection-diffusion rather than diffusion only, whereas at low Darcy velocity (i.e. < or = 10(-9) m s(-1)), transport of K+ would be controlled by diffusion. The test results and parametric analysis may be applied in design of landfill liners and SLDLs, particularly in coastal areas.     

Metabolism of potassium bromate in rats II. In vitro studies

To learn more about the biodegradation of potassium bromate, the decomposition of bromate in various tissues of rats was studied. Bromate was degraded very slowly in human saliva and plasma of rat. However, nearly all tissue homogenates and red blood cells could degrade bromate by a mechanism which exhibited some stability to heat. Furthermore, it was suggested that the bromate degradation active component in the supernatant fraction of a liver homogenate was in part glutathione.     

Development of a three-year-old child FE model

OBJECTIVE: Child crash dummies are conventionally used for safety performance evaluations of the child restraint system (CRS) in vehicle crash tests. To investigate injuries to various body regions of a child in detail, mathematical models are useful, and provide information that cannot be analyzed by crash dummies. Therefore, in the present research, a finite element (FE) model of a 3-year-old child has been developed by model-based scaling from the AM50 human FE model, THUMS (Total HUman body for Safety). METHODS: The dimensions of each body region were based on the anthropometry data of United States children, and material properties of child bone were estimated from data reported in the literature. Neck flexion, thorax impact responses, and torso flexion were validated against the response corridor of the 3-year-old Hybrid III dummy in calibration tests. A test of lap belt loading to the abdomen was also conducted. FE models of two different types of CRS, a 5-point harness and a tray shield CRS, were also made, and ECE R44 sled impact test simulations were conducted using the child FE model. RESULTS: The characteristics of the child FE model proved to be close to the Hybrid III and child volunteer corridor. In the ECE R44 sled test simulations using the child FE model, the head movement down and head rotation were large in the 5-point harness CRS, and chest deflection was large in the tray shield CRS. In both CRS types, the whole spine flexed in the child FE model. This behavior is different from that of the Hybrid III, where the thorax spine is stiff and only the cervical spine and lumbar spine flex. CONCLUSIONS: Although this child FE model has several limitations in areas such as the anatomical shapes and material properties of a child, this model can be a useful tool to examine the behavior of a child in impacts, which may be difficult to predict by using the Hybrid III dummy with its stiff thorax spine box.     

Influence of chemical characteristics of humic substances on the partition coefficient of a chlorinated dioxin

The partition coefficients (Koc) of 1,2,3,4,6,7,8-heptachlorodibenzo-p-dioxin (HpCDD) with respect to a variety of humic substances (HSs) were evaluated by a method involving solid-phase microextraction and gas chromatography-electron capture detection. The log Koc values for each of the HS samples were in the range of 6.4-7.7. The log Koc values for HAs from tropical peat, brown forest and ando soils were in the range of 7.3-7.6, similar to the calculated value for the octanol-water partition coefficient (log Koc=7.56). In contrast, the log Koc values for FAs and peat HAs were 0.5-1 unit lower than the calculated value. The parameters for the polarity of HSs, as calculated from (N+O)/C, O/C atomic ratios and the carboxyl group content, were numerically similar related to the log Koc for HpCDD. These results show that the Koc values for HpCDD are significantly influenced by the polarity of HSs.     

On the Estimation of Dispersal Kernels from Individual Mark-Recapture Data

We present a new method for estimating a distribution of dispersal displacements (a dispersal kernel) from mark-recapture data. One conventional method of calculating the dispersal kernel assumes that the distribution of displacements are Gaussian (e.g. resulting from a diffusion process) and that individuals remain within sampled areas. The first assumption prohibits an analysis of dispersal data that do not exhibit the Gaussian distribution (a common situation); the second assumption leads to underestimation of dispersal distance because individuals that disperse outside of sampling areas are never recaptured. Our method eliminates these two assumptions. In addition, the method can also accommodate mortality during a sampling period. This new method uses integrodifference equations to express the probability of spatial mark-recapture data; associated dispersal, survival, and recapture parameters are then estimated using a maximum likelihood method. We examined the accuracy of the estimators by applying the method to simulated data sets. Our method suggests designs for future mark-recapture experiments. Received: January 2004 / Revised: July 2005     

Correspondence analysis of paper recycling society: consumers and paper makers in Japan

Paper passes through many hands. In the present paper, key parts of this cycle in Japan were examined, using questionnaire surveys of households and paper makers. The study aimed to examine the paper makers' strategy for paper production and their attitude to recycling, in comparison with those of the consumers. The study especially focused on toilet paper because consumers have a lot of freedom in purchasing toilet paper. A total of 1242 consumers and 60 paper makers responded. The major findings were as follows. First, we compared the criteria of consumers for purchasing toilet paper with the conjectures of paper makers. Brand, advertisements and the appearance of shopping displays received 60% support from paper makers, but less than 12% of consumers selected these criteria even if we exclude those who do not buy toilet paper or do not have any particular criteria. On the other hand, multiple plies and benefit to the earth were selected by moderate numbers (between 20 and 25%) of consumers, while only 16.77 and 5.69%, respectively of paper makers marked these criteria. Paper makers strongly believe that many retailers sell toilet paper as a loss-leader. By comparing those matters considered important for recycling by consumers with those considered important by makers, it was shown that many makers have a clear awareness of the particular problem, the lack of used paper consumption, in the current paper recycling situation in Japan.     

Fine and ultrafine particle-and gas-polycyclic aromatic hydrocarbons affecting southern Thailand air quality during transboundary haze and potential health effects

Distribution of PM_0.1,PM₁and PM_2.5particle-and gas-polycyclic aromatic hydrocarbons(PAHs) during the 2019 normal,partial and strong haze periods at a background location in southern Thailand were investigated to understand the behaviors and carcinogenic risks PM₁was the predominant component,during partial and strong haze periods,accounting for 45.1%and 52.9%of total suspended particulate matter,respectively,while during nor mal period the contribution...     

Characterization of the genes involved in nitrogen cycling in wastewater treatment plants using DNA microarray and most probable number-PCR

To improve nitrogen removal performance of wastewater treatment plants (WWTPs), it is essential to understand the behavior of nitrogen cycling communities, which comprise various microorganisms. This study characterized the quantity and diversity of nitrogen cycling genes in various processes of municipal WWTPs by employing two molecular-based methods:most probable number-polymerase chain reaction (MPN-PCR) and DNA microarray. MPN-PCR analysis revealed that gene quantities were not statistically different among processes, suggesting that conventional activated sludge processes (CAS) are similar to nitrogen removal processes in their ability to retain an adequate population of nitrogen cycling microorganisms. Furthermore, most processes in the WWTPs that were researched shared a pattern:the nirS and the bacterial amoA genes were more abundant than the nirK and archaeal amoA genes, respectively. DNA microarray analysis revealed that several kinds of nitrification and denitrification genes were detected in both CAS and anaerobic-oxic processes (AO), whereas limited genes were detected in nitrogen removal processes. Results of this study suggest that CAS maintains a diverse community of nitrogen cycling microorganisms; moreover, the microbial communities in nitrogen removal processes may be specific.

Open image in new window

     

Evaluation of the toxicity of tetrabromobisphenol A and some of its oxidation products using a micro-scale algal growth inhibition test

A micro-scale algal growth inhibition (μ-AGI) test using a common micro-plate based fluorometric detection was used to demonstrate the effects of humic substances (HSs) on the toxicity of tetrabromobisphenol A (TBBPA) and its oxidative decomposition products 2,5-dibromo-1,4-benzoquinone (2,5-DBBQ), 2,5-dibromohydroquinone (2,5-DBHQ), 2,6-dibromobenzoquinone (2,6-DBBQ), and 2,6-dibromophenol (2,6-DBP) to Pseudokirchneriella subcapitata. The EC₅₀ values were: EC_50(TBBPA) = 7 mg L^?1, EC_50(2,5-DBHQ) = 7 mg L^?1, EC_50(2,5-DBBQ) = 19 mg L^?1, EC_50(2,6-DBP) = 49 mg L^?1, and EC_50(2,6-DBBQ) = 13 mg L^?1. The toxicity of the chemicals was slightly lower in the presence of HA. The toxicity of TBBPA decomposed by a biomimetic catalytic system consisting of iron (III) 5,10,15,20-tetrakis (p-sulfonatophenyl) porphyrin (Fe(III)-TPPS) and KHSO₅ was also evaluated using P. subcapitata and Chlamydomonas reinhardtii.     

Degradation of bisphenol A by photo-fenton processes

The photo-Fenton reactions, which could yield hydroxyl radicals via the catalytic degradation of H₂O₂ by Fe(II), were focused as one of the abiotic degradation processes of bisphenol A (BPA) in surface waters. At pH 6, in the presence of H₂O₂ only, 32% of BPA was degraded after 120?min of irradiation. However, 97% of BPA was degraded in the presence of both H₂O₂ and Fe(II). Without light irradiation, no BPA degradation was observed even in the presence of Fe(II) and H₂O₂. These results show that photo-Fenton processes are effective in the natural attenuation of BPA in surface water. In addition, the presence of humic acids (HAs), which were of more aliphatic nature, resulted in enhancing BPA degradation via the photo-Fenton processes. Therefore, HAs can be one of the important factors in enhancing the degradation of BPA in surface water via the photo-Fenton processes.