São Paulo Aerosol Characterization Study

Abstract

The São Paulo Metropolitan area (SPMA) is characterized as having one of the worst air pollution problems in Brazil,with frequent violations of air quality standards for particulate matter. This paper presents the results of a eceptor model source apportionment study carried out to develop a quantitative database on which a control strategy could be developed. The study was conducted in four sites with distinct land uses. Fine, coarse (CP), and total suspended particles (TSP) samples were collected on Teflon and glass filters and analyzed by x-ray fluorescence XRF), ion chromatography, and thermal evolution. The sources were characterized by similar methodology. Chemical mass balance (CMB) receptor modeling indicated that carbonaceous material plays an important role in the aerosol composition; that the three major source categories contributing to the fine particles are vehicles, secondary carbon, and sulfates; and that the main contributors to CP and TSP are road dust and vehicles. All sampling sites presented the same general pattern in terms of source contribution, although this contribution varied from site to site.     

The variability in nutrient composition of Anaerobic Digestate granules produced from high shear granulation

This study investigates the production of organic fertilizer using Anaerobic Digestate (as a nutrient source) and limestone powder as the raw materials. A two-level factorial experimental design was used to determine the influence of process variables on the nutrient homogeneity within the granules. Increasing the liquid-to-solid ratio during granulation resulted in increased granule nutrient homogeneity. Increasing the processing time and the impeller speed were also found to increase the nutrient homogeneity. In terms of nutrients release into deionized water, the granules effectively released both potassium and phosphate into solution.     

Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature

For governments and for manufacturing companies, global warming, rising energy prices, and customers’ increasing ecological awareness have pushed energy efficient manufacturing to the top of the agenda. Governments and companies are both striving to identify the most effective measures to increase energy efficiency in manufacturing processes. Based on results of a recent EU-funded roadmapping project, this paper highlights the needs of industrial companies for integrating energy efficiency performance in production management. First, it analyses concepts and tools for measurement, control and improvement of energy efficiency in production management proposed in literature. Second, the paper outlines that ICT tools and standardization are important enablers for energy efficient manufacturing. Third, industrial needs in these areas are presented based on expert interviews. The industrial needs thus identified are contrasted with concepts proposed in literature to point out the implementation gaps between practice and theory. The paper demonstrates that there exists a gap between the solutions available and the actual implementation in industrial companies. It concludes by deriving requirements for energy management in production that future collaborative research projects should address.     

The effect of deoxynivalenol on serotoninergic neurotransmitter levels in pig blood 1

Abstract

Deoxynivalenol (DON) produces two characteristic toxicological effects, decreased feed consumption (anorexia) and emesis. Both effects have been linked to increased central (CNS) serotoninergic activity. Although there has also been some indication of a peripheral involvement, the role of blood pools of serotonin and related compounds in mediating DON toxicity is not well defined. In this study, the effect of DON on plasma concentrations of serotonin (5‐hydroxytryptamine, 5HT), 5HIAA (5‐hydroxyindoleacetic acid) and tryptophan (TRP), as a reflection of an induced peripheral serotoninergic system, was investigated in swine.

Typical values for the plasma concentrations of 5HT, 5HIAA, and TRP were established in pigs. Following administration of DON, either intragastrically or intravenously, concentration changes in these substances were measured over an eight hour period. The effect of low and high toxin doses were also compared.

Analyses showed no effect on plasma levels of the compounds of interest, even at sufficient toxin doses to invoke emesis in the test animals. Any variation over the course of the study remained within acceptable control limits. These results indicated no peripheral effect by DON which could account for the increased serotoninergic activity associated with altered feeding behaviour or emesis.     

A Study of Primary Sulfate Emissions From a Coal-Fired Boiler with FGD

A study was carried out to investigate the emissions of SO₂ and primary sulfate materials (H₂SO₄ and inorganic particulate matter) from a boiler burning fossil fuel and using a wet-limestone scrubber for SO₂ removal. Experiments were designed to assess the scrubbing efficiency for SO₂ and sulfate, as well as the potential for scrubber liquor reentrainment. The boiler studied was an 820 MW cyclone-fired unit equipped with a wet, limestone scrubber, consisting of eight two-stage venturi-absorber modules designed to treat a flue gas flow rate of 2,760,000 acfm. The boiler fuel was a low-grade sub-bituminous coal with ash and sulfur contents of 25 and 5%, respectively. Multiple-sampling methods were employed concurrently on the inlet and outlet of a candidate absorber module to measure SO₂, total water-soluble sulfate, and free H₂SO₄. Samples were collected during three field experiments from September 1977 through April 1978. The average SO₂ scrubbing efficiency was 76% and was observed to decrease over the 5 day operation/maintenance cycle of the module. The total water-soluble sulfate input to the scrubber amounted to approximately 1% of the total sulfur oxides and was composed of a 5:1 ratio of H₂SO₄ to particulate sulfate. The total sulfate scrubbing efficiency, averaging about 29%, was invariant with respect to SO₂ removal. The sulfate emissions measured in the scrubber exit gas consisted of about 85 % H₂SO₄ as a fine aerosol. Mass emissions of acid and particulate sulfate were calculated as 1730 Ib/hr and 305 Ib/hr, respectively.     

Workplace aerosol mass concentration measurement using optical particle counters

Direct-reading aerosol measurement usually uses the optical properties of airborne particles to detect and measure particle concentration. In the case of occupational hygiene, mass concentration measurement is often required. Two aerosol monitoring methods are based on the principle of light scattering: optical particle counting (OPC) and photometry. The former analyses the light scattered by a single particle, the latter by a cloud of particles. Both methods need calibration to transform the quantity of scattered light detected into particle concentration. Photometers are simpler to use and can be directly calibrated to measure mass concentration. However, their response varies not only with aerosol concentration but also with particle size distribution, which frequently contributes to biased measurement. Optical particle counters directly measure the particle number concentration and particle size that allows assessment of the particle mass provided the particles are spherical and of known density. An integrating algorithm is used to calculate the mass concentration of any conventional health-related aerosol fraction. The concentrations calculated thus have been compared with simultaneous measurements by conventional gravimetric sampling to check the possibility of field OPC calibration with real workplace aerosols with a view to further monitoring particle mass concentration. Aerosol concentrations were measured in the food industry using the OPC GRIMM? 1.108 and the CIP 10-Inhalable and CIP 10-Respirable (ARELCO?) aerosol samplers while meat sausages were being brushed and coated with calcium carbonate. Previously, the original OPC inlet had been adapted to sample inhalable aerosol. A mixed aerosol of calcium carbonate and fungi spores was present in the workplace. The OPC particle-size distribution and an estimated average particle density of both aerosol components were used to calculate the mass concentration. The inhalable and respirable aerosol fractions calculated from the OPC data are closely correlated with the results of the particle size-selective sampling using the CIP 10. Furthermore, the OPC data allow calculation of the thoracic fraction of workplace aerosol (not measured by sampling), which is interesting in the presence of allergenic particles like fungi spores. The results also show that the modified COP inlet adequately samples inhalable aerosol in the range of workplace particle-size distribution.     

Influence of a portable air treatment unit on health-related quality indicators of indoor air in a classroom

During periods of two weeks in February and June 2010 the performance of portable air treatment units (PATUs) was evaluated in a primary school classroom using indicators of indoor air quality. Air samples were collected in an undisturbed setting on weekend days and in an occupied setting during teaching hours. In the first week PATUs were turned off and in the second week they were turned on. On weekend days PATUs reduced indoor levels of PM-10 by 87% in February and by 70% in June compared to weekend days when PATUs were turned off. On schooldays, indoor PM-10 was increased by 6% in February and reduced by 42% in June. For PM-2.5 reductions on weekend days were 89% in February and 80% in June. On school days PM-2.5 was increased by 15% in February and reduced by 83% in June. Turning on the PATUs reduced total VOC by 80% on weekend days and by 57% on school days (but not in June). No influence on formaldehyde, NO(2), O(3) and molds was observed. PATUs appeared to be less effective in removal of air pollutants when used in an occupied classroom compared to an unoccupied setting. Our study suggests that such devices should be tested in real-life settings to evaluate their influence on indoor air quality.     

Climate dynamics and extreme precipitation and flood events in Central Europe

Past changes and possible future variations in the nature of extreme precipitation and flood events in Central Europe and the Alpine region are examined from a physical standpoint. An overview is given of the following key contributory physical processes: (1) the variability of the large-scale atmospheric flow and the associated changes of the North-Atlantic storm track; (2) the feedback process between climate warming and the water cycle, and in particular the potential for more frequent heavy precipitation events; and (3) the catchment-scale hydrological processes associated with variations in major river flooding events and that are related to land-use changes, river training measures, and shifts in the proportion of rain to snowfall. In this context an account is provided of the possible future forecasting and warning methodologies based upon high-resolution weather prediction and runoff models. Also consideration is given to the detectability of past (future) changes in observed (modeled) extreme events. It is shown that their rarity and natural fluctuation largely impedes a detection of systematic variations. These effects restrict trend analysis of such events to return periods of below a few months. An illustration using daily precipitation from the Swiss Alps does yield evidence for pronounced trends of intense precipitation events (return period 30 days), while trends of stronger event classes are not detectable (but nevertheless can not be excluded). The small detection probability for extreme events limits possible mitigation of future damage costs through an abatement of climate change alone, and points to the desirability of developing improved early forecasting/warning systems as an additional no-regret strategy. This revised version was published online in July 2006 with corrections to the Cover Date.