Arsenic and other toxic elemental contamination of groundwater, surface water and soil in Bangladesh and its possible effects on human health

The problems of contamination caused by arsenic (As) and other toxic metals in groundwater, surface water and soils in the Bengal basin of Bangladesh have been studied. Altogether 10 groundwater, seven surface water and 31 soil samples were collected from arsenic-affected areas and analysed chemically. The geologic and anthropogenic sources of As and other toxic metals are discussed in this paper. The chemical results show that the mean As concentrations in groundwater in the Char Ruppur (0.253mg As L^–1), Rajarampur (1.955mg As L^–1) and Shamta areas (0.996mg As L^–1) greatly exceed the WHO recommended value, which is 0.01mg As L^–1. The concentrations of As in groundwater are very high compared to those in surface water and in surface soil in the three (As-affected) areas studied. This indicates that the source of As in groundwater could be bedrock. The relatively high concentrations of Cr, Cu, Ni, Pb and Zn in surface water, compared to world typical value, are due to the solubility of metal ions, organometalic complexes, coprecipitation or co-existance with the colloidal clay fraction. In the soil, the elevated concentrations of As, Cr, Cu, Ni, Pb and Zn are due to their strong affinity to organic matter, hydrous oxides of Fe and Mn, and clay minerals.     

An Optimised Direct Lysis Method for Viral RNA Extraction and Detection of Foodborne Viruses on Fruits and Vegetables

Detection of norovirus (NoV) and hepatitis A virus (HAV) on fruits and vegetables using current standard methodologies can be inefficient. Method optimisat     

Enhancement of Tensile Strength and Flexibility of Polycaprolactone/Tapioca Starch Blends by Octadecylamine Modified Clay

Polycaprolactone/tapioca starch/octadecylamine modified clay (OMMT) nanocomposites were successfully prepared by melt blending. X-ray diffraction and transmission electron microscopy (TEM) of the products showed that they are nanocomposites of a mixture intercalated and exfoliated types. In addition, the TEM also revealed that the OMMT layers are homogeneously distributed in the polymer matrix. The presence of 1 php of OMMT improved the compatibility of the polymers in the blends which consequently increased the tensile strength of the blend of more than 60% and elongation at break of more than 1,000%.     

Polymeric Nanocomposite-Based Herbicide of Carboxymethyl Cellulose Coated-Zinc/Aluminium Layered Double Hydroxide-Quinclorac: A Controlled Release Purpose for Agrochemicals

Journal of Polymers and the Environment - In this work, the use of carboxymethyl cellulose (CMC) is highlighted in enhancing the controlled release behaviour of zinc/aluminium layered double...     

Biomass fuel use,burning technique and reasons for the denial of improved cooking stoves by Forest User Groups of Rema-Kalenga Wildlife Sanctuary,Bangladesh

ABSTRACT

This study investigates the structural linkages of product quality, corporate image, store image, and price on customer satisfaction and loyalty towards green products usage in Malaysia. The research used structural equation modelling technique via AMOS 21.0 computer program for data analysis across a sample of 200 university students who applies a green lifestyle, such as purchasing green products which are referring to only retail goods, using recyclable products, and ozone-free products. Empirical analysis divulged that product quality followed by corporate image, store image, and product price jointly affected customer satisfaction in using green products. They are highly concerned that the green store provides a variety of good quality products with good value for money. Marketers should aggressively promote the identification of green products and overcome the problem of just noticeable difference between green product and non-green product among consumers for business sustainability. Empirical findings provide valuable insights to put forth in outlining effective marketing strategies that widen the marketers’ understanding of consumer behaviour in using green products with regard to their satisfaction and loyalty levels from the perspective of product quality, corporate image, store image, and product prices in Malaysia markets.     

Direct and Indirect Effects of Socioeconomic Factors on Age at First Marriage in Slum Areas,Bangladesh

This article attempts to examine the influence of some selected predictor variables on female age at first marriage in slum areas of Bangladesh. A path and multiple classification analysis （MCA） approach have been adopted. Authors thought that respondent＇s educational level and the mass media such as watching television have a significant direct impact on age at marriage, while the types of family and occupational status have an indirect effect on age at marriage.     

Agricultural GHG emission and calorie intake nexus among different socioeconomic households of rural eastern India

A study was conducted to examine the interrelationships among socioeconomic factors, household consumption patterns, calorie intake and greenhouse gas emissions factors in rural eastern India based on household survey data. Findings indicated that higher monthly per capita incomes (12.1–80.1$) were associated with greater average calorie intakes (2021–2525 kcal d^?1). As estimated by the FEEDME model, in total 17.2% of the population was calorie malnourished with a regional disparity of 29.4–18.2% malnourishment. Greenhouse gas (GHG) emissions were calculated only on the basis of crop and livestock production and consumption. Rice accounted for the highest share of total GHG emissions, on average 82.6% on a production basis, which varied from 58.1% to 94.9% in regional basis. Rice contributed the greatest share (~?65% and 66.2%) in terms of both calories and GHG emissions (CO₂ eq y^?1), respectively, on a consumption basis. We conclude that extensive rice farming and increasing animal product consumption are dominant factors in the higher carbon footprint in this region and are likely to further increase with increase in per capita income. This study provides useful information to help for better crop planning and for fine-tuning food access policy, to reduce carbon footprint and calorie malnutrition.

     

Discriminant analysis for the prediction of sand mass distribution in an urban stormwater holding pond using simulated depth average flow velocity data

The approach of this paper is to predict the sand mass distribution in an urban stormwater holding pond at the Stormwater Management And Road Tunnel (SMART) Control Centre, Malaysia, using simulated depth average floodwater velocity diverted into the holding during storm events. Discriminant analysis (DA) was applied to derive the classification function to spatially distinguish areas of relatively high and low sand mass compositions based on the simulated water velocity variations at corresponding locations of gravimetrically measured sand mass composition of surface sediment samples. Three inflow parameter values, 16, 40 and 80 m³ s^?1, representing diverted floodwater discharge for three storm event conditions were fixed as input parameters of the hydrodynamic model. The sand (grain size?>?0.063 mm) mass composition of the surface sediment measured at 29 sampling locations ranges from 3.7 to 45.5 %. The sampling locations of the surface sediment were spatially clustered into two groups based on the sand mass composition. The sand mass composition of group 1 is relatively lower (3.69 to 12.20 %) compared to group 2 (16.90 to 45.55 %). Two Fisher’s linear discriminant functions, F ₁ and F ₂, were generated to predict areas; both consist of relatively higher and lower sand mass compositions based on the relationship between the simulated flow velocity and the measured surface sand composition at corresponding sampling locations. F ₁?=??9.405?+?4232.119?×?A???1795.805?×?B?+?281.224?×?C, and F ₂?=??2.842?+?2725.137?×?A???1307.688?×?B?+?231.353?×?C. A, B and C represent the simulated flow velocity generated by inflow parameter values of 16, 40 and 80 m³ s^?1, respectively. The model correctly predicts 88.9 and 100.0 % of sampling locations consisting of relatively high and low sand mass percentages, respectively, with the cross-validated classification showing that, overall, 82.8 % are correctly classified. The model predicts that 31.4 % of the model domain areas consist of high-sand mass composition areas and the remaining 68.6 % comprise low-sand mass composition areas.     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.