Physico‐mechanical and Flammability Properties of Cyrtostachys renda Fibers Reinforced Phenolic Resin Bio-composites

Journal of Polymers and the Environment - The aim of this study is to investigate the effect of fiber length and loading on physico-mechanical and flammability properties of Cyrtostachys renda (CR)...     

Preparation and Characterization of Polyamide Thin Film Composite Nanofiltration Membrane Based on Polyurethane Nanofibrous Support

Journal of Polymers and the Environment - Polyurethane nanofibers recognized to perform as a sub-layer were employed herein as a medial-layer of high porosity in the fabrication of a novel class of...     

Attributes of Occupational Injury Among Workers in the Chemical Industry and Safety Issues

Case-study research was carried out with a view to find the attributes of occupational injury among workers in the chemical industry and to enhance safety issues. Injury data were collected and processed in terms of different variables, such as age, gender, skills, type of hazard, etc. Pareto analysis was then applied to find a pattern of occupational injury among the workers. The study revealed that 79.52% of the injured workers were in the 40–59 age group; 57.14% of accidents occurred during the 1st shift; 73.26% of accidents caused injury to hands, feet, chest to thigh, arms and eyes; and 70.93% of injuries were caused by pumps, carrying and lifting, vehicles, pipelines, valves, and grinding. Surprisingly, no one was injured in the group of temporary workers. The paper also provides specific suggestions followed by some action plans.     

Pulmonary Functions of Welders in Gas Transmission Pipelines in Iran

This study evaluated the influence of welding on pulmonary functions in welders. Spirometry tests were performed before and after work shift in 91 welders and 25 clerks (control group). We examined forced vital capacity (FVC), forced expiratory volume in 1 s (FEV1), FEV1/FVC ratio and forced expiratory flow 25%-75% (FEF 25–75). Significant differences were found for FVC and FEV1/FVC between welders and the control group in pre- and post-shift measurements (p < .001). In welders, smoking and nonsmoking habit had no significant effects on any pulmonary indices before or after shift. Work experience and fume concentrations also had no significant effects on the majority of spirometric indices (p > .05). Most welders had at least 1 of the respiratory symptoms. Significant differences were found between pre- and post-shift indices (as percentage of predicted values calculated with spirometer) and between the welders engaged in some welding tasks and the control group before work shift. This study documented work-related changes in pulmonary functions in the welders and marked drops in these functions without symptoms in some welders.     

Sustainable forest management in Iran: a factor analysis

Since 1996, several Forest Resources Management Plans (FRMPs) have been launched by the Iranian government in order to approach sustainable forest management in the Zagros area in west and south-west Iran. This survey study aimed to provide some policy recommendations in order to launch more successful FRMPs. Using a proportional cluster random sampling method, data were collected from 208 forest-dwellers (beneficiaries) and 90 practitioners. The results showed that the FRMPs are far from satisfactory. There are several reasons for this failure. First, the financial resources allocated to these plans are being used for other purposes. Second, the inputs and supplies needed for effective forest management interventions were not in place in a timely manner. Third, the forest management in the area is far from being decentralized. Both the beneficiaries and practitioners believe that forest-dwellers play a weak role in forest management interventions. Factor analysis revealed that three main factors influencing the Zagros management effectiveness are “the management capabilities of forest-dwellers”, “the professional capabilities of practitioners in forest management”, and “public support for forest-dwellers”. The correlation analysis revealed that all the three factors are also positively and significantly associated with the success of the government’s forestry programs. Accordingly, the main recommendation of this study was to reformulate forest management policies in the Zagros area by highlighting participatory approaches, not only as a tool, but also as a goal of FRMPs.     

Food Insecurity in Pakistan: Causes and Policy Response

There is evidence of continued food insecurity and malnutrition in Pakistan despite significant progress made in terms of food production in recent years. According to “Vision 2030” of the Planning Commission of Pakistan, about half of the population in the country suffers from absolute to moderate malnutrition, with the most vulnerable being children, women, and elderly among the lowest income group. The Government of Pakistan has been taking a series of policy initiatives and strategic measures to combat food insecurity issues. These range from increasing production to food imports, implementation of poverty reduction strategies, nutritional improvement programs, as well as provision of social safety nets. The article aims to instill some fresh thinking into the debate regarding the challenges of food security. It underscores the limitations of hitherto policy response, and suggests crucial measures to improve the present grim scenario. Policy makers, planners, practitioners, and academicians in countries with comparable socio-political and economic setup can view this discussion as a case study and may apply the findings in their domain accordingly.     

Determination of an appropriate quadrat size and shape for detecting association between plant species

The outcome of association analysis between species can be influenced by the size and shape of sampling quadrats. To eliminate this problem, a new method is proposed for determining an appropriate size for sampling quadrat. This method is based on measurement of the density of the plant species concerned. The use of this method is illustrated for the detection of association between species in a hypothetical community.     

Benefits of Bt cotton counterbalanced by secondary pests? Perceptions of ecological change in China

In the past, scientific research has predicted a decrease in the effectiveness of Bt cotton due to the rise of secondary and other sucking pests. It is suspected that once the primary pest is brought under control, secondary pests have a chance to emerge due to the lower pesticide applications in Bt cotton cultivars. Studies on this phenomenon are scarce. This article furnishes empirical evidence that farmers in China perceive a substantial increase in secondary pests after the introduction of Bt cotton. The research is based on a survey of 1,000 randomly selected farm households in five provinces in China. We found that the reduction in pesticide use in Bt cotton cultivars is significantly lower than that reported in research elsewhere. This is consistent with the hypothesis suggested by recent studies that more pesticide sprayings are needed over time to control emerging secondary pests, such as aphids, spider mites, and lygus bugs. Apart from farmers?? perceptions of secondary pests, we also assessed their basic knowledge of Bt cotton and their perceptions of Bt cotton in terms of its strengths and shortcomings (e.g., effectiveness, productivity, price, and pesticide use) in comparison with non-transgenic cotton.     

A probabilistic water quality index for river water quality assessment: a case study

Available water quality indices have some limitations such as incorporating a limited number of water quality variables and providing deterministic outputs. This paper presents a hybrid probabilistic water quality index by utilizing fuzzy inference systems (FIS), Bayesian networks (BNs), and probabilistic neural networks (PNNs). The outputs of two traditional water quality indices, namely the indices proposed by the National Sanitation Foundation and the Canadian Council of Ministers of the Environment, are selected as inputs of the FIS. The FIS is trained based on the opinions of several water quality experts. Then the trained FIS is used in a Monte Carlo analysis to provide the required input-output data for training both the BN and PNN. The trained BN and PNN can be used for probabilistic water quality assessment using water quality monitoring data. The efficiency and applicability of the proposed methodology is evaluated using water quality data obtained from water quality monitoring system of the Jajrood River in Iran.     

Prevalence of heavy metal resistance in bacteria isolated from tannery effluents and affected soil

In the present study, a total of 198 bacteria were isolated, 88 from the tannery effluents and 110 from agricultural soil irrigated with the tannery effluents. Tannery effluents and soils were analyzed for metal concentrations by atomic absorption spectrophotometer. The tannery effluents and soil samples were found to be contaminated with chromium, nickel, zinc, copper, and cadmium. All isolates were tested for their resistance against Cr^6?+?, Cr^3?+?, Ni^2?+?, Zn^2?+?, Cu^2?+?, Cd^2?+?, and Hg^2?+?. From the total of 198 isolates, maximum bacterial isolates were found to be resistant to Cr^6?+? 178 (89.9%) followed by Cr^3?+? 146 (73.7%), Cd^2?+? 86 (43.4%), Zn^2?+? 83 (41.9%), Ni^2?+? 61 (30.8%), and Cu^2?+? 51 (25.6%). However, most of the isolates were sensitive to Hg^2?+?. Among the isolates from tannery effluents, 97.8% were resistant to Cr^6?+? and 64.8% were resistant to Cr^3?+?. Most of the soil isolates were resistant against Cr^6?+? (83.6%) and Cr^3?+? (81.8%). All isolates were categorized into Gram-positive and Gram-negative bacteria. In a total of 114 Gram-positive isolates, 91.2% were resistant to Cr^6?+? followed by 73.7% to Cr^3?+?, 42.1% to Zn^2?+?, 40.4% to Cd^2?+?, and 32.5% to Ni^2?+?. Among Gram-negative isolates, 88.1% were found showing resistance to Cr^6?+?, 75.0% to Cr^3?+?, and 47.6% were resistant to Cd^2?+?. Majority of these metal-resistant isolates were surprisingly found sensitive to the ten commonly used antibiotics. Out of 198 isolates, 114 were found sensitive to all antibiotics whereas only two isolates were resistant to maximum eight antibiotics at a time. Forty-one and 40 isolates which constitute 20.7% and 20.2% were resistant to methicilin and amoxicillin, respectively.