Discriminating zooplankton assemblages through multivariate methods: A case for a tropical polluted harbour and Bar-built estuary

A comparative study (June-July 2001) on zooplankton community structure amid polluted conditions in a stagnant harbour and relatively unaffected tidal estuary near Visakhapatnam, on the east coast of India, revealed a marked disparity in species composition and abundance. While the harbour supported a rich population of calanoids (46.4%), the estuary sustained mostly cyclopoids (55.2%). Univariate and multivariate techniques (species diversity, clustering, non-metric multi-dimensional scaling and one-way ANOSIM) revealed the existence of two differing zooplankton assemblages and associated water quality (similarity 50.6%). While the estuary is typified by high amounts of dissolved silica (67.4 ± 17.7 μmol l^-1) linked with monsoon influx, the harbour waters revealed abnormal levels of phosphate (40.9 ± 9.2 μmol l^-1) and nitrate (15.3 ± 5.41 μmol l^{- 1}) suggestive of intense eutrophication, caused by the discharge of fertilizer-factory waste and domestic sewage. On the basis of routines (e.g. BVSTEP, SIMPER) implemented in Plymouth Routines in Multivariate Ecological Research, it was possible to demonstrate that while species such as Oithona rigida, Oithona brevicornis, crustacean nauplii, gastropod veligers, Acartia spinicauda, and Acartia centrura played a key role in discriminating the zooplankton assemblage in the estuary, Acrocalanus spp. (mainly Acrocalanus gracilis) played a keyed role in harbour waters. Canonical Correspondence Analysis revealed species-environment relationships; for example, while the distribution of Oithona spp. and its associates in the estuary corresponded intimately with high silicate, temperature, and low salinity, it was high salinity, phosphate, and nitrate in the harbour channel that supported a different assemblage of copepods dominated by calanoids.     

Effect of an acidic and readily-biodegradable non-hazardous industrial process waste on refuse decomposition

Non-hazardous industrial process wastes are receiving increased interest from landfill owners, especially with respect to bioreactor operation. These wastes could benefit bioreactors as they represent sources of liquid, nutrients, and/or substrate as well as revenue. However, landfill operators should exercise caution in accepting these wastes, as some could have detrimental effects on refuse decomposition. In this research, the use of laboratory-scale tests to evaluate the effect of one such waste on refuse decomposition is demonstrated. The waste evaluated, referred to as burnt sugar, is an acidic byproduct of corn-based polylactic acid production and represents a source of readily-biodegradable carbon. Lactic acid was the primary constituent of the BS at 0.73 g/g and the COD was measured at 1230 mg COD/g. Testing protocols were adapted to address the specific concerns surrounding the material. Abiotic dissolution tests conducted at mesophilic temperatures indicated that the majority of the waste dissolved into leachate recirculated over a layer of the waste within several days. Abiotic mixing tests suggested that the waste would acidify refuse to pH 6.41 at a loading of 21.9 g/dry kg refuse. However, in biologically active tests, the refuse was able to convert loadings as high as 196.7 g/dry kg refuse to methane. As the loadings increased toward and beyond this level, pronounced detrimental effects to the refuse ecosystem were observed, including a decrease in pH, accumulation of volatile fatty acids and COD, and lag in methane production. The results suggested that actively decomposing refuse has the potential to attenuate relatively high loading of a rapidly degradable but acidic substrate. Nonetheless, caution in the implementation of a field program to accept rapidly biodegradable acidic wastes is critical.     

An Example of Planning for Pollution Control in Kraft Pulping

Two factors have contributed to the preparation of this paper. The first stemmed from Morton Sterling’s remarks in his address to the Houston Meeting. Therein he suggested the value of industry making public the progress made in overcoming pollution problems. Interest in Kraft Pulping Pollution problems on a wider scale constituted the second factor. This is well illustrated by the U.S.P.H.S. annotated bibliography, “Air Pollution and the Kraft Pulping Industry.” This paper will not contribute any new technology. It will, however, indicate how an established plant, in a large urban area, has planned and taken action to solve a pollution problem. Planning in this situation is used in a broad sense. It includes education and training of personnel, changes in process, capital expenditure and new installations, constant attention to maintenance and control, utilization of research and development from all sources, and relations with the public and regulatory agencies.     

The effect of air control systems on the indoor distributions of viable particles

We have investigated the filtering effects of three types of air control systems of enclosed structures on viable particles in the ambient air. Aspergillus fumigatus and other thermophilic organisms were used as monitors for viable particles. The indoor concentrations of viable particles were found to be affected by building design and the use of conventional mechanical air systems. Viable particles of approximately 4.0 μm and greater in aerodynamic diameter were filtered from the air while respirable size particles less than 4.0 μm were not filtered as well. There was evidence of growth of viable particles within the mechanical air systems. Conventional air control systems may not be adequate for the control of viable particle contamination of the indoor environment without modifications and proper maintenance.     

Extra-pair fertilizations in mountain white-crowned sparrows

Summary A population of white-crowned sparrows (Zonotrichia leucophrys oriantha) located near Tioga Pass, in the central Sierra Nevada of California, was studied during the 1985 and 1986 breeding seasons to determine how often chicks were not the offspring of both adults who reared them. Blood samples were obtained from 35 nesting pairs and feather pulp specimens were collected from all 110 young they fledged. Electrophoretic analyses of 4 polymorphic loci revealed that a minimum of 9 nests (26%) contained a chick that could not have been conceived in a mating between the attending pair, and that at least 15 chicks (14%) were not offspring of both attending adults. Using two recently developed probability indices, it was estimated that 34%–38% of chicks hatched at the study site were not offspring of one of their putative parents. Because there was no evidence that intraspecific brood parasitism occurred, all the mismatched young apparently resulted from extrapair copulations. Our data, along with similar results from other species, raise new questions about sexual selection and patterns of parental care in monogamous birds.     

Building Capacity for Protected Area Management in Lao PDR

Declining biodiversity in protected areas in Laos is attributed to unsustainable exploitation of natural resources. At a basic level, an important need is to develop capacity in academic and professional training institutions to provide relevant training to conservation professionals. The paper (a) describes the capacity building approach undertaken to achieve this goal, (b) evaluates the effectiveness of the approach in building capacity for implementing conservation and (c) reviews implementation outcomes. Strong linkages between organizations implementing field conservation, professional training institutions, and relevant Government agencies are central to enhancing effectiveness of capacity building initiatives aimed at improving the practice of conservation. Protected area management technical capacity needs will need to directly influence curriculum design to insure both relevance and effectiveness of training in improving protected area management. Sustainability of capacity building initiatives is largely dependent on the level of interest and commitment by host-country institutions within a supportive Government policy framework in addition to engagement of organizations implementing conservation.     

Impact of education on the attitudes of college students toward biotechnology

An interdisciplinary course was designed as an introduction to the applications of, and the socio-economic issues associated with, biotechnology. College students enrolled in the course were surveyed prior to the first formal lecture, and again upon completion of the course. Assessment was made of the impact of the educational materials on the attitudes and perceptions of the students toward the applications of biotechnology to agriculture. Data were collected for the first three semesters in which the course was offered. Answers to survey questions were analyzed on a before and after basis. It was found that students were very accepting of biotechnology prior to taking the course, despite a generally low level of exposure to this type of technology. The course was effective in increasing the knowledge base of the students, but not as effective in allaying their perceptions of risks associated with biotechnology.     

Reaction of arsenic vapor species with fly ash compounds: kinetics and speciation of the reaction with calcium silicates

In coal combustion systems, the partitioning of arsenic between the vapor and solid phases is determined by the interaction of arsenic vapors with fly ash compounds under post-combustion conditions. This partitioning is affected by gas–solid reactions between the calcium components of the ash particles and arsenic vapors. In this study, bench scale experiments were conducted with calcium compounds typical of coal-derived fly ash to determine product formation, the extent of reaction and reaction rates when contacted by arsenic oxide vapors. Experiments conducted with arsenic trioxide (As₄O_6(g)) vapors in contact with calcium oxide, di-calcium silicate and mono-calcium silicate over the temperature range 600–1000 °C indicated that these solids were capable of reacting with arsenic vapor species in both air and nitrogen. Calcium arsenate was the observed reaction product in all the samples analyzed. Maximum capture of arsenic occurred at 1000 °C with calcium oxide being the most effective of the three solids over the range of temperatures studied. Using a shrinking core model for a first order reaction and the results from intrinsic kinetic experiments conducted in air, the reaction rate constants were found to be 1.4×10⁻³exp(−2776/T) m/s for calcium oxide particles, 7.2×10⁻³exp(−3367/T) m/s for di-calcium silicate particles and 5.5×10⁻³exp(−3607/T) m/s for mono-calcium silicate particles. These results therefore suggest that any calcium present in fly ash can react with arsenic vapor and capture the metal in water-insoluble forms of the less hazardous As(V) oxidation state.