Workstation design in carpet hand-weaving operation: guidelines for prevention of musculoskeletal disorders.

Carpet weavers suffer from musculoskeletal problems mainly attributed to poor working postures. Their posture is mostly constrained by the design of workstations. This study was conducted to investigate the effects of 2 design parameters (weaving height and seat type) on postural variables and subjective experience, and to develop guidelines for workstation adjustments. At an experimental workstation, 30 professional weavers worked in 9 different conditions. Working posture and weavers' perceptions were measured. It was shown that head, neck and shoulder postures were influenced by weaving height. Both design parameters influenced trunk and elbows postures. The determinant factor for weavers' perception on the neck, shoulders and elbows was found to be weaving height, and on the back and knees it was seat type. Based on the results, the following guidelines were developed: (a) weaving height should be adjusted to 20 cm above elbow height; (b) a 10 degrees forward-sloping high seat is to be used at weaving workstations.     

Bioavailability to rats and toxicity in mice of carbofuran residues bound to faba beans.

14C-carbofuran penetrated readily into seeds of Vicia faba and the rate of penetration was found to be dose dependent. The percentage of bound residues was generally low and did not exceed 3% of the applied dose. When the bound residues were fed to rats 46% of the radioactivity was eliminated via CO2 and urine, while tissues contained 25%. Carbofuran phenol and 3-hydroxy carbofuran represented the main metabolites in the urine. These data indicate that bean-bound carbofuran residues are highly bioavailable to rats. Feeding mice with bound carbofuran residues for 90 days led to inhibition of erythrocyte cholinesterase activity after 30 days (35-40%) while the plasma enzyme remained unaffected. Serum transaminases and blood urea nitrogen were significantly elevated, indicating injury to hepatic and renal structures. The results strongly suggest that the bound residues can induce adverse biological effects in mice.     

Chemistry,abundance, detection and treatment of per- and polyfluoroalkyl substances in water: a review

Per- and polyfluoroalkyl substances (PFAS) encompass a wide range of compounds containing carbon–fluorine bonds. Due the strength of this bond and the high electronegativity of fluorine atoms, PFAS display stability, wettability and other characteristics that are unique for industrial applications and products. However, PFAS induce adverse effects on the environment and human health. Here we review the chemistry, synthesis, properties, analysis, occurrence in water, filtration, removal and oxydation of PFAS.  We highlight emerging hybrid treatments to remove PFAS from water.

     

Chemical and bacterial quality monitoring of the Nile River water and associated health risks in Qena–Sohag sector,Egypt

The River Nile is the primary source of freshwater for drinking, irrigation, and industrial purposes in Egypt. Thus, the water quality in this river concerns the health of local inhabitants. The present study reveals seasonal variations of various physicochemical and heavy metals parameters and microbial load of water at 15 sites from Qena to Sohag cities, Egypt. The water is fresh with TDS?≤?270 and 410 mg L^?1 in summer and winter, respectively. Fe, Mn, Cd, Cr, Cu, Ni, and Zn concentrations were within drinking water specification in both seasons except Cr and Cd in summer. Viable numbers of total coliform, fecal coliform, and fecal streptococci were recorded in both seasons with fecal streptococci's disappearing in winter. The concentrations of salts and ions in winter were higher than summer due to decreased water quantity and flow rate in this season. On the other hand, heavy metals and bacteria were higher in summer owing to the rain and weathering of upstream rocks and increasing of human activities during the summer. The calculated water quality index (WQI) depicted that the chemical quality of water was poor for drinking and treatment, especially biological treatment, which is required before the water is supplied for drinking. Human health risk assessment factors such as probable daily intake, hazard quotient, and carcinogenic risk indicated high risks of Cr, Cd, and Ni for adults and children in both seasons. The non-carcinogenic and carcinogenic risks are mainly posed by Cr. The WQI values for the other water uses indicated the marginal quality for aquatic life, fair for irrigation, and fair in summer to good in winter for livestock consumption. The irrigation water quality parameters indicated that the water could be used to irrigate all soils and crops except the hazard of biological contamination. The water–rock interaction controls water chemistry besides the contribution of human activities. The agricultural, industrial, and municipal wastewaters were the main contributors to water pollution and should be treated before discharge into the Nile River. Source and drinking water should be monitored continuously to prevent related human waterborne diseases.

     

Land classification used to select abandoned hazardous waste study sites

The biological effects of hazardous substances in the environment are influenced by climate, physiography, and biota. These factors interact to determine the transport and fate of chemicals, but are difficult to model accurately except for small areas with a large data base. The requirement for a large data base may be reduced locally if the regional influences of these factors were predetermined from existing data. Knowledge of the regional factors would also relax the restriction to considering only small areas. This paper advocates consideration of regional characteristics of the environment in the early stages of waste management strategy development. It presents as an example a procedure for selecting study sites from candidate-abandoned hazardous waste dumpsites in the southeastern United States. It uses small-scale maps of low resolution from the National Atlas to delineate the boundaries and to determine the environmental characteristics that prevail over units of land within the region. A computer map-overlay and graphic approach is used to facilitate the grouping of land types. Abandoned hazardous waste dumpsites found within land types that best represent the region are surveyed for selecting a study site. It is expected that environmental impact data obtained from a representative site would be useful for predicting impact potentials in similar remotely located areas within the same general region.     

Adsorption properties of kaolinite-based nanocomposites for Fe and Mn pollutants from aqueous solutions and raw ground water: kinetics and equilibrium studies

Raw kaolinite was used in the synthesis of metakaolinite/carbon nanotubes (K/CNTs) and kaolinite/starch (K/starch) nanocomposites. Raw kaolinite and the synthetic composites were characterized using XRD, SEM, and TEM techniques. The synthetic composites were used as adsorbents for Fe and Mn ions from aqueous solutions and natural underground water. The adsorption by the both composites is highly pH dependent and achieves high efficiency within the neutral pH range. The experimental adsorption data for the uptake of Fe and Mn ions by K/CNTs were found to be well represented by the pseudo-second-order kinetic model rather than the intra-particle diffusion model or Elovich model. For the adsorption using K/starch, the uptake results of Fe ions was well fitted by the second-order model, whereas the uptake of Mn ions fitted well to the Elovich model rather than pseudo-second-order and intra-particle diffusion models The equilibrium studies revealed the excellent fitting of the removal of Fe and Mn ions by K/CNTs and Fe using K/starch with the Langmuir isotherm model rather than with Freundlich and Temkin models. But the adsorption of Mn ions by K/starch is well fitted with Freundlich rather than Temkin and Langmuir isotherm models. The thermodynamic studies reflected the endothermic nature and the exothermic nature for the adsorption by K/CNTs and K/starch nanocomposites, respectively. Natural ground water contaminated by 0.4 mg/L Fe and 0.5 mg/L Mn was treated at the optimum conditions of pH 6 and 120 min contact time. Under these conditions, 92.5 and 72.5% Fe removal efficiencies were achieved using 20 mg of K/CNTs and K/starch nanocomposites, respectively. Also, K/CNTs nanocomposite shows higher efficiency in the removal of Mn ions as compared to K/starch nanocomposite.     

Photochemical generation of reactive intermediates from urban-waste bio-organic substances under UV and solar irradiation

Singlet oxygen (¹O₂), hydroxyl radicals (^•OH), and excited triplet states of organic matter (³OM^*) play a key role in the degradation of pollutants in aquatic environments. The formation rates and quantum yields (Φ) of these reactive intermediates (RI) through photosensitized reactions of dissolved organic matter (DOM) have been reported in the literature for decades. Urban biowaste-derived substances (UW-BOS), a form of organic matter derived from vegetative and urban waste, have recently been shown to be efficient sensitizers in the photo-degradation of different contaminants. Nevertheless, no quantitative measurements of photo-oxidant generation by UW-BOS have been reported. In this study, the formation quantum yields of ¹O₂ and ^•OH, as well as quantum yield coefficients of TMP degradation (indicative of ³OM^* formation), were quantified for two UW-BOS samples, under 254-nm UV radiation or simulated sunlight and compared to a DOM standard from the Suwanee River (SRNOM). Values of Φ for UW-BOS samples ranged from Φ(+¹O₂) = 8.0 to 8.8 × 10⁻³, Φ(+^•OH) = 4.1 to 4.3 × 10⁻⁶, and f _TMP = 1.22 to 1.23 × 10² L Einstein⁻¹ under simulated sunlight and from Φ(+¹O₂) = 1.4 to 2.3 × 10⁻², Φ(+^•OH) = 1.3 to 3.5 × 10⁻³, and f _TMP = 3.3 to 3.9 × 10² L Einstein⁻¹ under UV. Although UW-BOS are not necessarily better than natural DOM regarding photosensitizing properties, they do sensitize the production of RI and could potentially be used in engineered treatment systems.