The effects of chemical protective suits on human performance

Workers in the chemical industry are often required to wear protective suits while performing tasks. While these suits can be life saving, they increase the difficulty and discomfort faced by the wearer. This research explores the performance of individuals wearing the highly cumbersome Level A suit. The suits are heat-retentive and can cause fatigue that affects performance by increasing response time and decreasing accuracy. Members of Missouri’s Civil Support Team (CST) served as subjects for this research. They conducted fine and gross motor tests. Their completion time and accuracy were evaluated both out-of-suit and in-suit for the Level A chemical protective suits.A t-test was conducted to evaluate the effect of the Level A suits on performance. Results showed a significant increase in completion time and errors for gross motor tasks. This type of task had up to a 103% increase in time required and up to a 34% decrease in accuracy. The suit’s impact on fine motor skill was also significant, but to a lesser extent. Repeated measures test was performed to evaluate any potential time-in-suit effect. A decrease in mean task completion time was observed for some of the tasks. There was a corresponding decrease in accuracy but no consistent time-in-suit effect was identified.The results indicate the need for care when designing procedures and equipement to be used by humans wearing restrictive PPE. It is important to take human limitations into consideration in the design phase in order to decrease the need for human adaptation and increase system safety. To achieve this, understanding human factors is imperative when designing equipment, tasks, or procedures for workers wearing PPE.     

Assessing effects of aerobic and anaerobic conditions on phosphorus sorption and retention capacity of water treatment residuals

Water treatment residuals (WTRs) are the by-products of drinking water clarification processes, whereby chemical flocculants such as alum or ferric chloride are added to raw water to remove suspended clay particles, organic matter and other materials and impurities. Previous studies have identified a strong phosphorus (P) fixing capacity of WTRs which has led to experimentation with their use as P-sorbing materials for controlling P discharges from agricultural and forestry land. However, the P-fixing capacity of WTRs and its capacity to retain sorbed P under anaerobic conditions have yet to be fully demonstrated, which is an issue that must be addressed for WTR field applications. This study therefore examined the capacity of WTRs to retain sorbed P and sorb further additional P from aqueous solution under both aerobic and anaerobic conditions. An innovative, low cost apparatus was constructed and successfully used to rapidly establish anoxic conditions in anaerobic treatments. The results showed that even in treatments with initial solution P concentrations set at 100 mg l(-1), soluble reactive P concentrations rapidly fell to negligible levels (due to sorption by WTRs), while total P (i.e. dissolved + particulate and colloidal P) was less than 3 mg l(-1). This equated to an added P retention rate of >98% regardless of anaerobic or aerobic status, indicating that WTRs are able to sorb and retain P in both aerobic and anaerobic conditions.     

College and university environmental programs as a policy problem (part 2): strategies for improvement

Environmental studies and environmental sciences programs in American and Canadian colleges and universities seek to ameliorate environmental problems through empirical enquiry and analytic judgment. In a companion article (Part 1) we describe the environmental program movement (EPM) and discuss factors that have hindered its performance. Here, we complete our analysis by proposing strategies for improvement. We recommend that environmental programs re-organize around three principles. First, adopt as an overriding goal the concept of human dignity??defined as freedom and social justice in healthy, sustainable environments. This clear higher-order goal captures the human and environmental aspirations of the EPM and would provide a more coherent direction for the efforts of diverse participants. Second, employ an explicit, genuinely interdisciplinary analytical framework that facilitates the use of multiple methods to investigate and address environmental and social problems in context. Third, develop educational programs and applied experiences that provide students with the technical knowledge, powers of observation, critical thinking skills and management acumen required for them to become effective professionals and leaders. Organizing around these three principles would build unity in the EPM while at the same time capitalizing on the strengths of the many disciplines and diverse local conditions involved.     

Estimation of population density by spatially explicit capture-recapture analysis of data from area searches

The recent development of capture-recapture methods for estimating animal population density has focused on passive detection using devices such as traps or automatic cameras. Some species lend themselves more to active searching: a polygonal plot may be searched repeatedly and the locations of detected individuals recorded, or a plot may be searched just once and multiple cues (feces or other sign) identified as belonging to particular individuals. This report presents new likelihood-based spatially explicit capture-recapture (SECR) methods for such data. The methods are shown to be at least as robust in simulations as an equivalent Bayesian analysis, and to have negligible bias and near-nominal confidence interval coverage with parameter values from a lizard data set. It is recommended on the basis of simulation that plots for SECR should be at least as large as the home range of the target species. The R package "secr" may be used to fit the models. The likelihood-based implementation extends the spatially explicit analyses available for search data to include binary data (animal detected or not detected on each occasion) or count data (multiple detections per occasion) from multiple irregular polygons, with or without dependence among polygons. It is also shown how the method may be adapted for detections along a linear transect.     

What Lies Beneath? An Evaluation of Rapid Assessment Tools for Management of Hull Fouling

Despite an increased understanding of marine invasions, non-indigenous species (NIS) continue to be redistributed at both global and regional scales. Since prevention is an important element of NIS programs, monitoring vectors responsible for NIS introductions and spread, such as hull fouling, has become a priority and methods should be selected carefully to balance accuracy, time, and cost. Two common fouling assessment tools for the marine recreational boating vector were evaluated for accuracy using a traditional underwater SCUBA survey in coastal British Columbia: a dockside level of fouling assessment and a behavioral questionnaire model. Results showed that although rapid, dockside assessments did not provide an accurate assessment of fouling present below the surface, at least not in this region. In contrast, a questionnaire-based model using four easily obtained variables (boat type, age of antifouling paint, storage type, and occurrence of long distance trips) reliably identified boats carrying macrofouling species, a proxy for risk of NIS transport. Once validated, this fouling model tool could be applied in border inspection or quarantine situations where decisions must be made quickly. Further development and refinement of rapid assessment tools would improve our ability to prevent new introductions and manage spread of existing invasive species.     

Community Sustainability Plans to enable change towards sustainable practice – a Scottish case study

There is a need for a global shift towards a low-carbon society and this requires action at the local level. The aim of the study into sustainable community development is to clarify the role of a community as a whole rather than the role of individuals within that community. Mixed methods of literature review and empirical study have been used to translate the knowledge and experience with urban sustainable development into empirical knowledge of a rural, market town setting. The exemplary case study is the Scottish market town Huntly. The main findings of the study show the need for three ingredients for a Community Sustainability Plan for a town such as Huntly. Community involvement is crucial in developing such plans in a rural setting. Further research in more remote settings, e.g. coastal and island communities, is needed to allow broader conclusions on rural sustainable development.     

Bioreactor applications in waste treatment

An overview of bioreactor applications in treatment of gaseous, liquid and solid wastes is presented with emphasis on newer technologies. Waste treatment is considered in a broad context including concentration by bioaccumulation, degradation to substances with reduced environmental impact and upgrading to such useful products as feeds, foods and fuels. Biofilters and bioscrubbers for gaseous pollutants, high-rate municipal and industrial wastewater treatment in airlift bioreactors, reactor-based soil bioremediation, artificial wetland filters for liquid effluents, and protein enrichment of agricultural solid residues are some of the technologies reviewed. The various treatment strategies are illustrated with examples. The developments discussed point to an increasing role for bioreactor based processes in waste treatment and reuse.     

Suicidal behavior by motor vehicle collision

BACKGROUND: The ability for suicides of drivers to be disguised as traffic accidents raises the possibility that suicidal behaviors of this nature are far more prevalent than previously thought, potentially impacting health, road safety, and insurance companies. METHOD: Persons residing at the Gold Coast, Australia, identified as having a history of suicidal ideation and behaviors (n = 1,196), were sent a mail-out survey after their consent was obtained in initial telephone contact (CATI random digit-dialing). Among those responding, 412 had made suicide plans or arrangements and 228 suicide attempts. RESULTS: Of those who reported planning a suicide, 14.8% (19.1% of male planners and 11.8% of female planners) had conceived to have a motor vehicle "accident" (n = 61). Of all attempters, 8.3% (13.3% of male attempters) had previously attempted via motor vehicle collision (n = 19). All attempters reported having emotional or mental problems at the time of the event. Suicide planners were significantly more likely to be in full-time employment and have a partner and children compared with other planners. CONCLUSION: The study gives a rare insight into driver suicide plans and attempts, via a large-scale community survey, to provide the best opportunity of collecting unbiased data on the driver suicide behavior. Results suggest the use of this method, particularly in attempts made by males, may be underreported leading to inaccuracy of statistics. The motives behind choosing this method are somewhat different to those behind other methods, including financial benefits and eliminating stigma in the aftermath of a suicide.     

Efficiency of waste management in municipalities and the importance of waste separation

Journal of Material Cycles and Waste Management - The European Union emphasises the need to sever the link between economic growth, resource consumption and waste production and has set targets to...     

Transcending capitalism growth strategies for biodiversity conservation

The unlimited economic growth that fuels capitalism's metabolism has profoundly transformed a large portion of Earth. The resulting environmental destruction has led to an unprecedented rate of biodiversity loss. Following large-scale losses of habitats and species, it was recognized that biodiversity is crucial to maintaining functional ecosystems. We sought to continue the debate on the contradictions between economic growth and biodiversity in the conservation science literature and thus invite scholars to engage in reversing the biodiversity crisis through acknowledging the impacts of economic growth. In the 1970s, a global agenda was set to develop different milestones related to sustainable development, including green–blue economic growth, which despite not specifically addressing biodiversity reinforced the idea that economic development based on profit is compatible with the planet's ecology. Only after biodiversity loss captured the attention of environmental sciences researchers in the early 2000s was a global biodiversity agenda implemented. The agenda highlights biodiversity conservation as a major international challenge and recognizes that the main drivers of biodiversity loss derive from economic activities. The post-2000 biodiversity agendas, including the 2030 Agenda for Sustainable Development and the post-2020 Convention on Biological Diversity Global Strategy Framework, do not consider the negative impacts of growth-oriented strategies on biodiversity. As a result, global biodiversity conservation priorities are governed by the economic value of biodiversity and its assumed contribution to people's welfare. A large body of empirical evidence shows that unlimited economic growth is the main driver of biodiversity loss in the Anthropocene; thus, we strongly argue for sustainable degrowth and a fundamental shift in societal values. An equitable downscaling of the physical economy can improve ecological conditions, thus reducing biodiversity loss and consequently enhancing human well-being.