Application of multivariate statistical techniques in the assessment of groundwater quality in seawater intrusion area in Bafra Plain, Turkey

Multivariate statistical techniques such as cluster analysis and principal component analysis were performed on 28 groundwater wells in Bafra Plain. Cluster analysis results show that the groundwater in the study area is classified into three groups (A, B, and C), and factor analysis indicates that groundwater is composed of 89.64 % of total variance of 12 variables and is mainly affected by three factors. Factor 1 (seawater salinization) includes concentrations of electrical conductivity, TDS, Cl^?, Na⁺, and sodium adsorption ratio, factor 2 (mixing water) includes δ¹⁸O, δD, and T, and factor 3 (fresh) includes Ca²⁺. For determination of the source of water, Ca/Cl, Cl/HCO₃, Mg/Cl, and Ca/Na as initials and Mg/Ca and SO₄/Cl as molar rates which were identified, the rates had been found to be very useful. Cluster analysis was made by using these rates and the waters were classified in two groups (group 1 and group 2). First group waters were affected by seawater, and the second group were very less affected by freshwater or seawater. According to the comparison of two different parameters, group 1 comprised group A and group B-2, -3, and -4 from the same wells, and group 2 comprised group B-1 and group C from the same well. As a result of this study, it could be said that multivariate statistical methods gave very useful results for the determination of the source.     

A detailed investigation of ambient aerosol composition and size distribution in an urban atmosphere

This research was executed between March 2009 and March 2010 to monitor particulate matter size distribution and its composition in Istanbul. Particulate matter composition was determined using ion chromatography and inductively coupled plasma optical emission spectrometry. The sampling point is adjacent to a crowded road and the Bosporus Strait. Two prevailing particulate modes are found throughout PM₁₀ by sampling with a nine-stage low-volume cascade impactor. First mode in the fine mode is found to be between 0.43 and 0.65 μm, whereas the other peak was observed between 3.3 and 4.7 μm, referring to the coarse mode. The mean PM₁₀ concentration was determined as 41.2 μg/m³, with a standard deviation of 16.92 μg/m³. PM_0.43 had the highest mean concentration value of 10.67 μg/m³, making up nearly one fourth of the total PM₁₀ mass. For determining the effect of traffic on particulate matter (PM) composition and distribution, four different sampling cycles were applied: entire day, nighttime, rush hour, and rush hour at weekdays. SO ₄ ^?2 and organic carbon/elemental carbon proportions are found to be lower in night samples, representing a decrease in traffic. The long-range transports of dust storms were observed during the sampling periods. Their effects were determined analytically and their route models were run by the HYSPLIT model and validated through satellite photographs taken by the NASA Earth Observatory.     

Impacts of seawater intrusion on soil salinity and alkalinity in Bafra Plain, Turkey

This study was carried out to investigate possible seawater intrusion into groundwater along the coastal lines of the Bafra Plain and salinity–alkalinity problems over land areas irrigated with water exposed to seawater intrusion were evaluated. For this purpose, 32 groundwater wells were selected over the plain, water samples were taken from these wells between October 2007 and September 2008, and chemical analyses were performed over these samples. Soil samples were taken from the fields irrigated with this water at 32 different locations at the end of the irrigation season in September 2008 from 0–30, 30–60, 60–90, and 90–120 cm soil depths and textures. EC, pH, Na, Ca, Mg, and K analyses were performed over these samples. Excessive seawater intrusion was observed in some parts of the plain and impacts of seawater intrusion decreased with the distance from the coastal line. It was determined that groundwater quality was significantly affected from seawater intrusion. Salinity and especially alkalinity problems were observed in land areas irrigated with this water and alkalinity increased with the rate of intrusion.     

Production of Fe2O3 from FeSO4·xH2O formed in galvanizing works

FeSO₄·xH₂O is generated in large amounts in galvanizing workshops. It can be reutilized by conversion to Fe₂O₃. In this study, the recovery of Fe₂O₃ from FeSO₄·xH₂O formed in the galvanizing process has been examined. The experimental work was carried out at various temperatures and times in the oxidizing medium. The reaction temperatures and times were selected as 450, 500, 550, 600, 650, 700, 800 and 900°C, and 15, 30, 45, 60, 90 and 120 minutes, respectively. In order to determine the amount of Fe₂O₃, a titrimetric method was applied. The reaction products were characterized by means of IR and XRD techniques.The extent of conversion is low at temperatures below 650°C. Almost all of the iron (II) sulfate in the original sample was converted to iron(III) oxide at 650°C (120 min), 700°C (90 min), 800°C (60 min) and 900°C (45 min).     

Quantitative evaluation of precautions on chemical tanker operations

Large quantities of liquid chemicals are carried by chemical tankers all over seas. Chemical cargoes have different properties and chemical tankers are complex ships that are designed to carry different types of chemical cargoes. Carriage of chemical cargoes contains different hazards both for human life and marine environment. There are several cargo operations that are regularly done on chemical tankers such as loading, discharging, inerting, washing tanks, sampling, and freeing gas. These operations constitute their own risks. Therefore, risk assessment has become a critical issue in maritime industry. The present investigation of this study is attempting to examine the priorities of precautions that are taken by chemical tankers before, during, and after cargo operations. Analytic hierarchy process (AHP) is used for prioritizing the precautions in order to clarify the risk assesment option that will be used for pro-active approach to prevent marine casualties. The main aim of this study is to identify an appropriate management tool to increase the level of safety for chemical tankers during cargo operations at a terminal by using the results of AHP application.     

In vitro effects of erythromycin and florfenicol on primary cell lines of Unio crassus and Cyprinus carpio

Environmental Science and Pollution Research - The ubiquitous use of antibiotics leads exposure of these chemicals on non-target aquatic species, while the toxicity assays for these chemicals are...     

Does digitalization matter in green preferences in nexus of output volatility and environmental quality?

Environmental Science and Pollution Research - The fact is that output volatility and carbon dioxide (CO2) emissions move together over the period. This empirical study examines the dynamic effect...     

Assessment of spatial variability in some soil properties as related to soil salinity and alkalinity in Bafra plain in northern Turkey

The objectives of this study were to assess the variability in soil properties affecting salinity and alkalinity, and to analyze spatial distribution patterns of salinity (EC) and alkalinity (ESP) in the plain, which was used irrigation agriculture with low quality waters. Soil samples were collected from 0–30cm, 30–60cm, 60–90cm and 90–120cm soil depths at 60 sampling sites. Soil pH had the minimum variability, and hydraulic conductivity (Ks) had the maximum variability at all depths. The mean values of pH, EC, ESP and Ks increased while the mean values of CEC decreased with soil depth. Values pH, EC and ESP were generally high in the east and northeastern sides. Soil properties indicated moderate to strong spatial dependence. ESP and pH were moderately spatially dependent for three of the four depths, EC exhibited moderate spatial dependence for one of the four depths, CEC had a moderate spatial dependence at all depths, and Ks exhibited a strong spatial dependence. EC, CEC, and ESP were considerably variable in small distances. The spatial variability in small distances of EC, CEC, pH and ESP generally increased with depth. All geostatistical range values were greater than 1230m. It was inferred that the strong spatial dependency of soil properties would be resulted in extrinsic factors such as ground water level, drainage, irrigation systems and microtopography.