Assessing the impacts of mountain biking and hiking on subalpine grassland in Australia using an experimental protocol

Mountain biking is an increasingly popular, but sometimes controversial, activity in protected areas. Limited research on its impacts, including studies comparing biking with hiking, contributes to the challenges for mangers in assessing its appropriateness. The impacts of mountain bike riding off trail were compared to those of hiking on subalpine grassland in Australia using a modification of a common trampling experimental methodology. Vegetation and soil parameters were measured immediately and two weeks after different intensities of mountain biking (none, 25, 75, 200 and 500 passes across slope, 200 pass up and down slope) and hiking (200 and 500 passes across slope). There were reductions in vegetation height, cover and species richness, as well as changes in species composition and increases in litter and soil compaction with riding. Riding up and down a moderate slope had a greater impact than riding across the slope. Hiking also affected vegetation height, cover and composition. Mountain biking caused more damage than hiking but only at high use (500 passes). Further research including other ecosystems, topography, styles of riding, and weather conditions are required, but under the conditions tested here, hiking and mountain biking appear to be similar in their environmental impacts.     

Use of feathers of feral pigeons (Columba livia) as a technique for metal quantification and environmental monitoring

This study quantifies metal concentrations in washed and unwashed feathers of feral pigeons (Columba livia). The material was collected in two different sites: Goiania (capital of Goiás State), with high anthropic activities, and Jataí (a city in Goiás), with low anthropic activities. Results revealed that metals such as Pb, Cr, and Cd were deposited in the feathers originating from air and soil (exogenous process). Other metals such as Cu, Fe, Mn, and Zn, which are part of the tissue constitution of a living being, were absorbed through the pigeons' diet (endogenous process). There was a statistically significant difference between mean values of Cd, Pb, and Cr in the three collection sites. The order of metal concentrations were Civic Square > Zoo > Jataí, which shows highest levels of metal contamination in anthropic environments. Significant differences between Cd, Pb, and Cr in washed and unwashed feathers suggest that metal concentrations are directly related to exposure time due to exogenous sources. We concluded that it is possible to quantify and monitor metal levels in the environment by analyzing the feathers of urban feral pigeons. Furthermore, unwashed feathers were especially efficient to investigate endogenous and exogenous absorption of the metals in our study.     

Nucella lapillus L. imposex levels after legislation prohibiting TBT antifoulants: temporal trends from 2003 to 2008 along the Portuguese coast

Nucella lapillus (dog whelk) imposex levels were assessed along the mainland Portuguese coast in 2006 and 2008 and were compared with available data from 2003 for the same area. Given that specimen size has been described as a factor inducing variation in some of the imposex assessment indices, and thus resulting in less reliable results, new monitoring and data analysis procedures are described and applied to study change of imposex levels from 2003 to 2008. A significant decline in imposex intensity was observed in the study area during the study period, and the Portuguese coast ecological status (under the terms defined by the OSPAR Commission) notably improved after 2003, confirming the effectiveness of the Regulation (EC) No. 782/2003 in reducing TBT pollution. Nevertheless, N. lapillus populations are still extensively affected by imposex, and fresh TBT inputs were detected in seawater throughout the coast in 2006. These recent inputs are attributed to vessels still carrying TBT antifoulants applied before 2003, as their presence in vessels was only forbidden in 2008. Considering that Regulation (EC) No. 782/2003 is an anticipation of the IMO global ban entered into force in September 2008, a worldwide-scale decrease in TBT pollution can be expected in the near future.     

Environmental impact of highway construction and repair materials on surface and ground waters. Case study: crumb rubber asphalt concrete

The practice of incorporating certain waste products into highway construction and repair materials (CRMs) has become more popular. These practices have prompted the National Academy of Science, National Cooperative Highway Research Program (NCHRP) to research the possible impacts of these CRMs on the quality of surface and ground waters. State department of transportations (DOTs) are currently experimenting with use of ground tire rubber ( crumb rubber) in bituminous construction and as a crack sealer. Crumb rubber asphalt concrete (CR-AC) leachates contain a mixture of organic and metallic contaminants. Benzothiazole and 2(3H)-benzothiazolone (organic compounds used in tire rubber manufacturing) and the metals mercury and aluminum were leached in potentially harmful concentrations (exceeding toxic concentrations for aquatic toxicity tests). CR-AC leachate exhibited moderate to high toxicity for algae ( Selenastrum capriconutum) and moderate toxicity for water fleas ( Daphnia magna). Benzothiazole was readily removed from CR-AC leachate by the environmental processes of soil sorption, volatilization, and biodegradation. Metals, which do not volatilize or photochemically or biologically degrade, were removed from the leachate by soil sorption. Contaminants from CR-AC leachates are thus degraded or retarded in their transport through nearby soils and ground waters.     

Ecological and physiological controls of species composition in green macroalgal blooms

Green macroalgal blooms have substantially altered marine community structure and function, specifically by smothering seagrasses and other primary producers that are critical to commercial fisheries and by creating anoxic conditions in enclosed embayments. Bottom-up factors are viewed as the primary drivers of these blooms, but increasing attention has been paid to biotic controls of species composition. In Washington State, USA, blooms are often dominated by Ulva spp. intertidally and Ulvaria obscura subtidally. Factors that could cause this spatial difference were examined, including competition, grazer preferences, salinity, photoacclimation, nutrient requirements, and responses to nutrient enrichment. Ulva specimens grew faster than Ulvaria in intertidal chambers but not significantly faster in subtidal chambers. Ulva was better able to acclimate to a high-light environment and was more tolerant of low salinity than Ulvaria. Ulvaria had higher tissue N content, chlorophyll, chlorophyll b: chlorophyll a, and protein content than Ulva. These differences suggest that nitrogen availability could affect species composition. A suite of five grazers preferred Ulva to Ulvaria in choice experiments. Thus, bottom-up factors allow Ulva to dominate the intertidal zone while resistance to grazers appears to allow Ulvaria to dominate the subtidal zone. While ulvoid algae are in the same functional-form group, they are not functionally redundant.     

A model of Cellular Automata for the spatial and temporal analysis of Citrus Sudden Death with the fuzzy parameter

Citrus Sudden Death (CSD) is a disease that has affected sweet orange trees grafted on Rangpur lime in the south of Minas Gerais state and in the north of São Paulo state (Brazil). This is a worrying characteristic because the Rangpur lime responds to 85% of the Brazilian citrus rootstocks. This disease is believed to be caused by a virus transmitted by aphids (vector) of the citrus. In this work, we have adopted the Cellular Automata model (CA) to study the temporal evolution of the disease. We take into account the effect of the wind in the space covered by the aphid. To establish the relationship between the space covered by the aphid and the intensity of the wind, we have adopted the rule-based fuzzy system. Simulations were performed and compared to real data. Through the use of the mean absolute error (MAE) method, it was possible to verify a 70% of similarity between our model of data and the real one.     

Evaluation of boron removal from water by hydrotalcite-like compounds

Layered double hydroxides (LDHs) or hydrotalcite (HT)-like compounds with different kinds of metal ions (Mg-Al and Mg-Fe) in the brucite-like sheets were prepared and their adsorption properties were studied in the boron removal from aqueous solution under laboratory conditions. The hydrotalcites were synthesized by the coprecipitation method and were characterized by chemical analyses, X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR) and specific surface area measurements (BET). The affinity of these materials with a mixture of B(OH)(3) and B(OH)(4)(-) was studied as a function of contact time, initial pH of the solutions, HT quantity and B concentration (adsorption isotherms). It was found that 120 min is enough time for the equilibrium state to be reached in boron adsorption. Boron removal was independent of the initial pH of the solutions because of the high buffering capacity of the LDHs. On the other hand, the adsorption capacity increases with increasing the adsorbent quantity. The adsorption isotherms, described by the Langmuir model, are of L-type, suggesting that B(OH)(4)(-) is adsorbed preferentially on HT-like materials. Besides, Mg-Al hydrotalcites showed higher adsorption capacity than Mg-Fe. We proposed that in Mg-Al hydrotalcites, the boron removal occurs by both adsorption on external surface and ion exchange, whereas for Mg-Fe it occurs only by surface adsorption. After treatment of a solution containing 5.2 mgBl(-1) with Mg-Al hydrotalcites the final boron concentration reached the recommended limit by WHO for drinking water (0.5 mgl(-1)).     

Simultaneous and direct determination of glyphosate and AMPA in water samples from the hydroponic cultivation of eucalyptus seedlings using HPLC-ICP-MS/MS

Abstract

Glyphosate is the main herbicide currently used in the world due to wide applicability and efficiency in controlling weeds in many crops. However, its overuse may lead to undesirable impacts on the environment and to human health in the long run. This present study aimed to optimize and validate solid phase extraction (SPE) using an anionic resin for the simultaneous and direct determination of glyphosate and aminomethylphosphonic acid (AMPA) in water samples using high-performance liquid chromatography combined with inductively coupled plasma with triple quadrupole mass spectrometer (HPLC-ICP-MS/MS). The results showed that recovery percentage and relative standard deviation were 103.9?±?7.9 and 99.40?±?9.9% for glyphosate and AMPA, respectively. The validation certified that the method was precise, accurate, linear, and selective, with a limit of quantification of 1.09 and 0.29?μg L^?1 for glyphosate and AMPA, respectively. The optimized methodology reached the concentration factor of 250 times and was successfully applied to analyze water samples from hydroponic cultivation of the eucalyptus seedlings. The results showed that the exudation process occurs at glyphosate doses starting from 2?L ha^?1.     

Environmental pollution of China to foreign investors: detrimental or beneficial?

Environmental Science and Pollution Research - This study investigates the dynamic linkage among foreign direct investment, energy consumption, and environmental pollution of China spanning from...