Total petroleum hydrocarbon burden in fish tissues from the Arabian Gulf

The levels of total petroleum hydrocarbons (TPH) and lipid contents have been reported for eight commercially important fish species from the Arabian Gulf. GC-FID has been used as quantification technique. Out of the species analyzed, Scarus ghabon showed the highest level of TPH (7.4 ± 3.2 µg g^?1) in the muscle tissue followed by Epinephelus tauvina (6.8 ± 3.6 µg g^?1). Except for E. microdon (4.8 ± 2.1 µg g^?1), all other fish species showed a similar level of TPH concentration. Significant correlations were obtained between lipid contents and TPH levels in the muscles of the fish. Body weight of the fish was also found to be strongly correlated with TPH concentration in the muscle tissue. There is a tendency of accumulating higher TPH in the winter season as compared to in the summer season.     

Identification of the sex pheromone of Conogethes pluto: a pest of Alpinia

In recent years, Conogethes pluto (Lepidoptera: Crambidae) has become a major pest of Alpinia and other ornamental gingers in the Northern Territory and Queensland, Australia. This pest damages the flowers and bores into the stems, causing substantial losses to production. Currently, no synthetic sex pheromone is available to monitor or control this pest. This work aims at the identification of the sex pheromone of this pest. Analysis of the sex pheromone gland of female C. pluto by gas chromatography/electroantennogram detector revealed the presence of seven candidate pheromone compounds that elicited electroantennogram responses. Using gas chromatography/mass spectrometry analysis and micro-derivatization reactions, six compounds were identified as (E)-10-hexadecenal, as the main pheromone compound, (Z)-10-hexadecenal, hexadecanal, (E)-10-hexadecen-1-ol, (10E,12E)-hexadeca-10,12-dienal and (3Z,6Z,9Z)-tricosa-3,6,9-triene as minor pheromone compounds. In two-field trapping experiments, C. pluto responded to the six-component blend, and three of six compounds, i.e., (E)-10-hexadecenal, (3Z,6Z,9Z)-tricosa-3,6,9-triene, and (10E,12E)-hexadeca-10,12-dienal were shown to be necessary for attraction. In a subsequent experiment testing various doses (i.e., 0.01, 0.1, and 1 mg) of the six-component blend, the largest number of males was captured in traps baited with a lure loading of 1 mg. The availability of the sex pheromone of C. pluto will enable monitoring and provides the basis for additional control options for this pest.     

Radiological aspects of some Egyptian thermo-mineral springs

In Egypt, nineteen water springs with temperatures exceeding 35 degrees C, which can be considered thermal waters, were reported. The radiological aspects of thermal water in three northern regions of Egypt (Gulf of Suez, Cairo, and Bahariya Oasis) were investigated. The activity concentrations of natural radionuclides of 226Ra, 40K, total uranium and 210Pb (210Po) in water samples were determined using gamma spectrometry, laser fluorimetry and alpha spectrometry after chemical separation, respectively. The highest concentrations are detected in two locations, namely Sudr and Hammam Faroun springs, which are the hottest waters in Egypt (89 and 72 degrees C respectively). It seems that the presence of 226Ra is correlated to the water mineralization and the depth and the temperature of the reservoir's base. Also, these results seem evidence of uranium accumulation at depth in the mother bedrock and/or uranium immobilization due to uranium reduction to the immobile 4+-oxidation state in the reservoir base. The average activity concentrations of 40K are dependent on the water's origin, i.e. meteoric water mixed with sea water (Gulf of Suez springs) and meteoric water (Bahariya Oasis wells). There is no prescribed dose limit for short term and temporary exposure to thermal water. Workers at the thermal springs should be regularly monitored because of their continuous exposure to enhanced radiation levels over a long period of time. The hydrochemical characteristics, environmental isotopes aspects and water origin are briefly discussed based on published data.     

Effect of water harvesting on growth of young olive trees in degraded Syrian dryland

Olive (Olea europaea L.) is a drought-tolerant tree which is usually grown in areas with a Mediterranean climate that receive >350 mm of annual rainfall. However, olive growing in Syria has recently expanded into drier areas (200–300 mm annual rainfall) where irrigation resources are limited. This study, carried out between November 2002 and October 2005, aimed to investigate the response of a little known Syrian drought-tolerant olive variety (Qaisi) to water harvesting and limited summer irrigation (200 l per tree) in an arid area (average annual rainfall of 210 mm) with Mediterranean climate in Syria. Soil moisture and growth of four-year-old trees were monitored regularly. Olive leaves were sampled at different stages to determine water content, specific mass, and N content. Stomatal conductance was also measured in 2005. Our results showed that water harvesting and summer irrigation improved soil moisture content, leaf water content (up to 36% higher in Sep. 2003), leaf N content (up to 45% higher in Aug. 2003), leaf stomatal conductance (up to 55% higher in Apr. 2005), and relative trunk growth rate. Water harvesting was most successful in wet years, although the water storage capacity was not enough to retain all harvested water. This study indicated that it is possible to grow drought-tolerant olive varieties in arid areas under little or no irrigation, but proper water and nutrient management should be considered for sustainable growth.     

Characterization of tannery effluent wastewater by proton-induced X-ray emission (PIXE) analysis to investigate their role in water pollution

Introduction  

Over the last few decades, the chromium-based tanning industry has shown rapid growth in Pakistan. However, the rules and regulations promulgated by the government are not strictly followed for processing the effluent discharge from the tanneries. Consequently, tannery effluents have become a great source of water pollution in surrounding areas.     

Monitoring trace elements generated by automobiles: air pollutants with possible health impacts

Major transformations in the environmental composition are principally attributable to the combustion of fuels by automobiles. Motorized gasoline-powered two-stroke auto-rickshaws (TSA) and compressed natural gas (CNG)-powered four-stroke auto-rickshaws (FSA) are potential source of air pollution in south Asia and produce toxic amount of particulate matter (PM) to the environment. In this study, we attempted to characterize elemental pollutants from the PM of TSA and FSA using proton-induced X-ray emission (PIXE) analysis. The observations of the existing investigation recognized significant increase in Al (P?<?0.05), P (P?<?0.01), and Zn (P?<?0.01) from the PM samples of FSA. In addition, the concentrations of Cu, Fe, K, Mg, Na and S were also observed exceeding the recommended National Institute for Environmental Studies limits. On the contrary, increased concentration of Sr and V were observed in the PM samples from TSA. It is generally believed that FSA generates smaller amount of PM but data obtained from FSA are clearly describing that emissions from FSA comprised potentially more toxic substances than TSA. The current research is specific to metropolitan population and has evidently revealed an inconsistent burden of exposure to air pollutants engendered by FSA in urban communities, which could lead to the disruption of several biological activities and may cause severe damage to entire ecological system.     

Study of contaminant transport at an open-tipping waste disposal site

Field and laboratory studies were conducted to estimate concentration of potential contaminants from landfill in the underlying groundwater, leachate, and surface water. Samples collected in the vicinity of the landfill were analyzed for physiochemical parameters, organic contaminants, and toxic heavy metals. Water quality results obtained were compared from published data and reports. The results indicate serious groundwater and surface water contamination in and around the waste disposal site. Analysis of the organic samples revealed that the site contains polychlorinated biphenyls and other organo-chlorine chemicals, principally chloro-benzenes. Although the amount of PCB concentration discovered was not extreme, their presence indicates a potentially serious environmental threat. Elevated concentrations of lead, copper, nickel, manganese, cadmium, and cobalt at the downgradient indicate that the contamination plume migrated further from the site, and the distribution of metals and metals containing wastes in the site is nonhomogeneous. These results clearly indicate that materials are poorly contained and are at risk of entering the environment. Therefore, full characterization of the dump contents and the integrity of the site are necessary to evaluate the scope of the problem and to identify suitable remediation options.     

Inhalation exposure to volatile organic compounds in the printing industry

ABSTRACT

This study reports on the occupational inhalation exposure to VOCs of workers in the Kuwaiti printing industry. Using the evacuated canister methodology, we targeted 72 VOCs in three printeries and compared the concentrations to previous reports and relevant occupational exposure levels (OELs). We found that recent efforts in the printing industry to reduce VOC usage had been successful, as concentrations of key hazardous VOCs were substantially lower than anticipated. On the other hand, nearly all target VOCs were found. Non-production areas were sampled along with the offset printing areas, another strength of this study, and revealed exposures to hazardous VOCs among administers and digital printer and CTP operators. Exposure to ototoxic VOCs amounted to 1–3% of the OEL, consisting mostly of ethylbenzene, which was likely in use in two of the study printeries. Exposure to carcinogenic or probably carcinogenic VOCs was 15–20% of the OEL at four locations across the three printeries, consisting mostly of vinyl chloride and benzyl chloride. Vinyl chloride VOC was partially sourced from outdoors, but was also likely used inside the study printeries. Interestingly, concentrations of vinyl chloride were similar in most sampling locations to that of CFC-114, a CFC banned by the Montreal Protocol and not commonly used as a refrigerant. This unexpected finding suggests further study is warranted to identify the use of these VOCs in printeries. Exposure to hazardous VOCs up to nearly 50% of the OEL, consisting largely of bromoform and vinyl chloride. Bromoform was found in all the study printeries, sourced partially from outdoor air. The higher concentrations found inside the study printeries likely resulted from the use of the desalinated water for washing. This finding raises of emissions from sources other than blanket washes, and inks, etc. adding to the total VOC load in printery indoor air.

Implications: Results from this study indicate that efforts to reduce worker exposure to VOCs particularly dangerous to human health in recent years have been successful, but there is still much to be done to protect workers. Exposures to ototoxic and carcinogenic VOCs were identified, among both production and non-production workers. Unexpected findings included the apparent use in printing activities of the carcinogen vinyl chloride and CFC-114, banned under the Montreal Protocol. Observed lapses in safety procedures included failure to utilize ventilation systems and closing doors between work areas, indicating management and worker education should remain a priority.     

n-Hexane Biodegradation in Trickle Bed Air Biofilters

While hydrophilic compounds are degraded easily in Trickling bed air biofilters (TBABs), hydrophobic compounds are retarded until biological cultures produce a sufficient RNA or enzyme/protein to utilize this compound. Hydrophobic compounds are not readily bio-available which makes them reluctant to biodegradation as mass transfer between the gas and liquid phases is a rate limiting step. To enhance the destruction of hydrophobic compounds in TBABs, the utilization of surfactant was introduced to increase the solubility which helps overcoming the rate limiting step. The surfactant was used as well to limit the growth of excess biomass ensuring smooth flow through the biofilter bed and preventing short circuits. Two different non-ionic non-toxic surfactants were used in this study: Triton X-100 and Tomadol® 25-7. Two lab-scale controlled TBABs were operated for investigating the performance difference for n-Hexane as an example of hydrophobic volatile organic compound (VOC) with and without the addition of surfactant. Operating conditions in both TBABs were as follows: nutrient feed rate (2L/day), air flowrate (1.4L/min), bed depth (60cm), empty bed retention time (120s), bed material (diatomaceous earth pellets) and room-temperature. The inlet concentration was changed from 50 to 100ppmv. Acclimation period, removal profile along biofilter depth, nitrogen consumption, and CO₂ production were compared under continuous loading operation condition. The optimum concentration of surfactant in the nutrient feed was determined by a batch experiment. The effect of different surfactant concentrations on VOC water solubility with time was studied by considering different VOC concentration sets within the TBAB loading rate range.     

Transient behavior of heavy metals in soils during electrokinetic remediation

This paper presents a systematic bench-scale laboratory study performed to assess the transient behavior of chromium, nickel, and cadmium in different soils during electrokinetic remediation. A series of laboratory electrokinetic experiments was conducted using two different clayey soils, kaolin and glacial till. For each type of soil, four electrokinetic experiments with 1, 2, 4, and 10 d of treatment time were performed. In all tests, the contaminants were Cr(VI), Ni(II), and Cd(II) combined in the soil. A geochemical assessment was performed using the geochemical model MINEQL(+) to determine the partitioning of the heavy metals in soils as precipitated, adsorbed, and aqueous forms. Results showed that in kaolin, the extent of Ni(II) and Cd(II) migration towards the cathode increased as the treatment time increased. Unlike kaolin, in glacial till treatment time had no effect on nickel and cadmium migration because of its high buffering capacity. In both kaolin and glacial till, the extent of Cr(VI) migration towards the anode increased as the treatment time increased. However, Cr(VI) migration was higher in glacial till as compared to kaolin because of the high pH conditions that existed in glacial till. In all tests, some Cr(VI) was reduced to Cr(III), and the Cr(VI) reduction rate to Cr(III) as well as the Cr(III) migration were significantly affected by the treatment time. Overall, this study showed that the electroosmotic flow as well as the direction and extent of contaminant migration and removal depend on the polarity of the contaminant, the type of soil, and the treatment duration.