Fast response measurements of the dispersion of nanoparticles in a vehicle wake and a street canyon

The distributions of nanoparticles (below 300 nm in diameter) change rapidly after emission from the tail pipe of a moving vehicle due to the influence of transformation processes. Information on this time scale is important for modelling of nanoparticle dispersion but is unknown because the sampling frequencies of available instruments are unable to capture these rapid processes. In this study, a fast response differential mobility spectrometer (Cambustion Instruments DMS500), originally designed to measure particle number distributions (PNDs) and concentrations in engine exhaust emissions, was deployed to measure particles in the 5–1000 nm size range at a sampling frequency of 10 Hz. This article presents results of two separate studies; one, measurements along the roadside in a Cambridge (UK) street canyon and, two, measurements at a fixed position (20 cm above road level), centrally, in the wake of a single moving diesel-engined car. The aims of the first measurements were to test the suitability and recommend optimum operating conditions of the DMS500 for ambient measurements. The aim of the second study was to investigate the time scale over which competing influences of dilution and transformation processes (nucleation, condensation and coagulation) affect the PNDs in the wake of a moving car. Results suggested that the effect of transformation processes was nearly complete within about 1 s after emission due to rapid dilution in the vehicle wake. Furthermore, roadside measurements in a street canyon showed that the time for traffic emissions to reach the roadside in calm wind conditions was about 45 ± 6 s. These observations suggest the hypothesis that the effects of transformation processes are generally complete by the time particles are observed at roadside and the total particle numbers can then be assumed as conserved. A corollary of this hypothesis is that complex transformation processes can be ignored when modelling the behaviour of nanoparticles in street canyons once the very near-exhaust processes are complete.     

Reduction of pollutants in pulp paper mill effluent treated by PCP-degrading bacterial strains

Two PCP-degrading bacterial strains, Bacillus cereus (ITRC-S6) and Serratia marcescens (ITRC-S7) were used for the treatment of pulp and paper mill effluent at conditions; 1.0% glucose and 0.5% peptone at 30 +/- 1 degrees C at 120 rpm for 168 h of incubation. These two bacterial strains effectively reduced colour (45-52%), lignin (30-42%), BOD (40-70%), COD (50-60%), total phenol (32-40%) and PCP (85-90%) within 168 h of incubation. However, the highest reduction in colour (62%), lignin (54%), BOD (70%), COD (90%), total phenol (90%) and PCP (100%) was recorded by mixed culture treatment. The bacterial mechanism for the degradation of pulp and paper mill effluent may be explained by an increase in the cells biomass using added co-substrates resulting liberation of significant amount of chloride due to bacterial dechlorination of chlorolignins and chlorophenols this showed reduction in colour, lignin and toxicity in the effluent. Further, GC-MS analysis of ethyl acetate-extractable compounds from treated pulp paper mill effluent reinforces the bacterium capability for the degradation of lignin and pentachlorophenol, as many aromatic compounds such as 2-chlorophenol, 2, 4, 6-trichlorophenol and tetrachlorohydroquinone, 6-chlorohydroxyquinol and tetrachlorohydroquinone detected which were not present in the untreated effluent.     

Investigations of an intense aerosol loading during 2007 cyclone SIDR – A study using satellite data and ground measurements over Indian region

Tropical cyclones are prominent weather systems characterized by high atmospheric pressure gradients and wind speeds. Intense tropical cyclones occur in India during the pre-monsoon (spring), early monsoon (early summer), or post-monsoon (fall) periods. Originating in both the Bay of Bengal (BoB) and the Arabian Sea (AS), these tropical cyclones often attain velocities of more than 100 km h^?1 and are notorious for causing intense rain and storm surge as they cross the Indian coast. In this study, we examine the changes in the aerosol properties associated with an intense tropical cyclone “SIDR”, that occurred during 11–16 November 2007 over BoB. This cyclone, accompanied with very strong surface winds reaching 223 km h^?1, caused extensive damage over Bangladesh. Ground-based measurements of Aerosol Optical Depth (AOD) in the neighboring urban environment of Hyderabad, India, showed significant variations due to changes in wind velocity and direction associated with the cyclone passage. The Terra-MODIS and AVHRR satellite images showed prevalence of dust particles mixed with emissions from anthropogenic sources and biomass-burning AS, while the aerosol loading over BoB was significantly lower. The positive values of Aerosol index (AI) obtained from the Ozone Monitoring Instrument (OMI) suggested the presence of an elevated aerosol layer over the West coast of India, AS and Thar Desert during and after the cyclone episode. Meteorological parameters from the MM5 mesoscale model were used to study the variations in winds associated with the cyclonic activity. Particulate matter loading over the region during the cyclone period increased by ～45% with an accompanying decrease in columnar aerosol optical depth. The variations in Angstrom parameters suggested coarse-mode particle loading due to dust aerosols as observed in satellite data.     

Evidence of new particle formation during post monsoon season over a high-altitude site of the Western Ghats,India

The formation of ultrafine particles, their growth, and associated characteristic features has been studied during new particle formation events over a high-altitude station of the Western Ghats during the 2014 post-monsoon season. Most of the events were observed during noon time where particle bursts in the nucleation-mode size range from 5 to 25 nm followed by sustained growth in size. This phenomenon persists for ～4–8 h with a growth rate of 1–2 nm h^–1. Peak concentrations of nucleation-mode particles during the event generally vary from 2300 to 5000 cm^–3. The mean growth rate is 1.4 ± 0.42 nm h^–1, particle formation rate is 1.14 ± 0.22 cm^–3 s^–1, coagulation sink is 0.35 ± 0.22 cm^–3 s^–1, and condensational sink is 15.4 ± 2.6?×?10^–3 s^–1. All these values are comparable with earlier results from Indian region. Comparison of size-segregated particle number concentration during days of new particle formation events and those without new particle formation were carried out showing a distinct variation in nucleation and Aitken mode with least variability associated with the accumulation mode.     

Bioefficacy evaluation of controlled release formulations based on amphiphilic nano-polymer of carbofuran against Meloidogyne incognita infecting tomato

In the present investigation, the bioefficacy of developed carbofuran formulations, with PEG-600 (7a, CP1) & PEG-900 (7b, CP2) @ 5, 10 and 20 ppm, along with commercial formulation of carbofuran 3G (CP0) were evaluated against the root-knot nematode, Meloidogyne incognita infecting tomato (cv. Pusa Ruby) in pot and field conditions. The bioefficacy data indicated that the formulations developed by utilizing polymers having PEG - 900 (7b) as hydrophilic segment were effective even at 14 days post inoculation (dpi) as evident from shoot and root length. Also, the reduction in penetration was found to be maximum with CP2 (3.6 - 4.6 J2s) at all concentrations compared to CP1 (6.6-16.4 J2s) and CP0 (29.3-32.6 J2s). Overall, CP2 was more effective in reducing the number of nematodes up to 14 days, compared to CP1 and CP0. Both the CR formulations (CP1 and CP2) in general significantly reduced the number of galls, when compared to CP0. However, under field conditions, lower concentrations (5, and 10 ppm) of CP2, were less effective in controlling the gall formation whereas, CP2 at 20 ppm, was most effective than other treatments. The study revealed that the developed CR formulations of carbofuran have the potential for effective management of M. incognita in tomato under field conditions.     

Dibenzazepin hydrochloride as a new spectrophotometric reagent for determination of hydrogen peroxide in plant extracts

A rapid, simple, accurate, and sensitive visible spectrophotometric method for the determination of trace amounts of hydrogen peroxide in acidic buffer medium is reported. The proposed method is based on the oxidative coupling of Ampyrone with dibenzazepin hydrochloride by hydrogen peroxide in the buffer medium of pH?4.0 which is catalyzed by ferrous iron. The blue-colored product formed with maximum absorption at 620?nm was found to be stable for 2?h. Beer's law is obeyed for hydrogen peroxide concentration in the range of 0.03-0.42?μg?ml(-1). The optimum reaction conditions and other important optical parameters are reported. The molar absorptive and Sandell's sensitivity are found to be 5.89?×?10(4)?mol(-1)?cm(-1) and 0.57?g/cm(2), respectively. The interference due to diverse ions and complexing agents was studied. The method is successfully applied to the determination of hydrogen peroxide in green plants satisfactorily.     

Influence of GSTM1 and GSTT1 genotypes and confounding factors on the frequency of sister chromatid exchange and micronucleus among road construction workers

In the present study, we have investigated the influence of polymorphism of GSTM1 and GSTT1 genes and confounding factors such as age, sex, exposure duration and consumption habits on cytogenetic biomarkers. Frequency of sister chromatid exchanges (SCEs), high frequency cell (HFC) and cytokinesis blocked micronuclei (CBMN) were evaluated in peripheral blood lymphocytes of 115 occupationally exposed road construction workers and 105 unexposed individuals. The distribution of null and positive genotypes of glutathione-S transferase gene was evaluated by multiplex PCR among control and exposed subjects. An increased frequency of CBMN (7.03 ± 2.08); SCE (6.95 ± 1.76) and HFC (6.28 ± 1.69) were found in exposed subjects when compared to referent (CBMN - 3.35 ± 1.10; SCE - 4.13 ± 1.30 and HFC - 3.98 ± 1.56). These results were found statistically significant at p < 0.05. When the effect of confounding factors on the frequency of studied biomarkers was evaluated, a strong positive interaction was found. The individuals having GSTM1 and GSTT1 null genotypes had higher frequency of CBMN, SCE and HFC. The association between GSTM1 and GSTT1 genotypes and studied biomarkers was found statistically significant at p < 0.05. Our findings suggest that individuals having null type of GST are more susceptible to cytogenetic damage by occupational exposure regardless of confounding factors. There is a significant effect of polymorphism of these genes on cytogenetic biomarkers which are considered as early effects of genotoxic carcinogens.     

How Should Support for Climate-Friendly Technologies Be Designed?

Stabilizing global greenhouse gas concentrations at levels to avoid significant climate risks will require massive “decarbonization” of all the major economies over the next few decades, in addition to the reduced emissions from other GHGs and carbon sequestration. Achieving the necessary scale of emissions reductions will require a multifaceted policy effort to support a broad array of technological and behavioral changes. Change on this scale will require sound, well-thought-out strategies. In this article, we outline some core principles, drawn from recent social science research, for guiding the design of clean technology policies, with a focus on energy. The market should be encouraged to make good choices: pricing carbon emissions and other environmental damage, removing distorting subsidies and barriers to competition, and supporting RD&D broadly. More specific policies are required to address particular market failures and barriers. For those technologies identified as being particularly desirable, some narrower RD&D policies are available.     

Transcriptome analysis provides insights for understanding the adverse effects of endosulfan in Drosophila melanogaster

Indiscriminate use of agrochemicals worldwide, particularly, persistent organic pollutants (POPs), is of concern. Endosulfan, a POP, is used by various developing/developed nations and is known to adversely affect the development and the hormonal profiles of humans and animals. However, little is known about the molecular players/pathways underlying the adverse effects of endosulfan. We therefore analyzed the global gene expression changes and subsequent adverse effects of endosulfan using Drosophila. We used Drosophila melanogaster keeping in view of its well annotated genome and the wealth of genetic/molecular reagents available for this model organism. We exposed third instar larvae of D. melanogaster to endosulfan (2.0 μg mL⁻¹) for 24 h and using microarray, we identified differential expression of 256 genes in exposed organisms compared to controls. These genes are associated with cellular processes such as development, stress and immune response and metabolism. Microarray results were validated through quantitative PCR and biochemical assay on a subset of genes/proteins. Taking cues from microarray data, we analyzed the effect of endosulfan on development, emergence and survival of the organism. In exposed organisms, we observed deformities in hind-legs, reminiscent of those observed in higher organisms exposed to endosulfan. In addition, we observed delayed and/or reduced emergence in exposed organisms when compared to their respective controls. Together, our studies not only highlight the adverse effects of endosulfan on the organism but also provide an insight into the possible genetic perturbations underlying these effects, which might have potential implications to higher organisms.