On sensitivity analysis: Let’s use it more!

The key factors that influence the population growth rate can be identified with sensitivity analysis. Caswell presented an algorithm based on vector calculus that speeds up, and improves the practicality of the application of the sensitivity analysis, by calculating the derivatives of the explicit elements from the population Leslie matrix. Despite the usefulness of the sensitivity analysis, it is still barely applied to empirical data, partially due to requirements of high quality demographic data and failure of compatibility between time intervals of field data collection and organism’s life stage timing. This can result in the absence of a certain vital rate as a separated element in the population projection matrix, and thus intricacy in obtaining its sensitivity. In this note we call the attention for the applied value of sensitivity analysis, and also we point to a simple formula that is easily implemented in Caswell Matlab algorithm, to calculate the sensitivity of a vital rate that is not explicit as a matrix element.     

Leaching and half-life of the herbicide tebuthiuron on a recharge area of Guarany aquifer in sugarcane fields in Brazil

This study was undertaken to evaluate the degradation and mobility of the herbicide tebuthiuron (N-[5-(1,1-dimethylethyl)-1,3,4-thiadiazol-2-yl]-N,N'-dimethylurea) in soil under field conditions, and its potential for leaching and groundwater contamination. A watershed, Espraiado, located over a recharge area in Brazil, was chosen for soil and water studies. At Espraiado, water samples were collected from seven wells at intervals of three months from March 2004 to June 2006 and analyzed for tebuthiuron. Other samples were taken from city wells located outside of the recharge area. To assess the potential movement to the aquifer, tebuthiuron was also applied to trial plots at the recommended label rate of 1.0 kg/ha a.i. in May of 2004, with and without sugarcane coverage, on sandy soil. Soil samples were collected during the years of 2004 and 2005, at depths intervals of 20 cm from soil surface down to 120 cm and analyzed for tebuthiuron at zero, 3, 30, 60, 90, 120, 150, 180, 240, and 300 days after application. There was no clear effect of sugarcane coverage on the tebuthiuron degradation in soils, but it moved faster into the soil where there was no cover. After 180 days there were no measurable residues in the soil, and tebuthiuron was not found below 40 cm depth in any time. Tebuthiuron had a half-life of 20 days under those conditions. No tebuthiuron residue was found in ground water samples at any sampling time.     

Evaluation of the efficiency of a Venturi scrubber in particulate matter collection smaller than 2.5 µm emitted by biomass burning

Environmental Science and Pollution Research - Energy demand has increased worldwide, and biomass burning is one of the solutions most used by industries, especially in countries that have a great...     

Bioremediation model for atrazine contaminated agricultural soils using phytoremediation (using Phaseolus vulgaris L.) and a locally adapted microbial consortium

The objective of the present study was to examine a biological model under greenhouse conditions for the bioremediation of atrazine contaminated soils. The model consisted in a combination of phytoremediation (using Phaseolus vulgaris L.) and rhizopheric bio-augmentation using native Trichoderma sp., and Rhizobium sp. microorganisms that showed no inhibitory growth at 10,000 mg L^?1 of herbicide concentration. 33.3 mg of atrazine 50 g^?1 of soil of initial concentration was used and an initial inoculation of 1 × 10⁹ UFC mL^?1 of Rhizobium sp. and 1 × 10⁵ conidia mL^?1 of Trichoderma sp. were set. Four treatments were arranged: Bean + Trichoderma sp. (B+T); Bean + Rhizobium sp. (BR); Bean + Rhizobium sp. + Trichoderma sp. (B+R+T) and Bean (B). 25.51 mg of atrazine 50 g^?1 of soil (76.63%) was removed by the B+T treatment in 40 days (a = 0.050, Tukey). This last indicate that the proposed biological model and methodology developed is useful for atrazine contaminated bioremediation agricultural soils, which can contribute to reduce the effects of agrochemical abuse.     

Bioassays for the evaluation of reclaimed opencast coal mining areas

Environmental Science and Pollution Research - This study aimed to use bioassays (single and multispecies) with organisms from different trophic levels to assess soil quality in reclaimed coal...     

Aspergillus sclerotiorum lipolytic activity and its application in bioremediation of high-fat dairy wastewater environments

Oils and grease (O&G) have low affinity for water and represent a class of pollutants present in the dairy industry. Enzyme-mediated bioremediation using biocatalysts, such as lipases, has shown promising potential in biotechnology, as they are versatile catalysts with high enantioselectivity and regioselectivity and easy availability, being considered a clean technology (white biotechnology). Specially in the treatment of effluents from dairy industries, these enzymes are of particular importance as they specifically hydrolyze O&G. In this context, the objective of this work is to prospect filamentous fungi with the ability to synthesize lipases for application in a high-fat dairy wastewater environment. We identified and characterized the fungal species Aspergillus sclerotiorum as a good lipase producer. Specifically, we observed highest lipolytic activity (20.72 U g⁻¹) after 96 h of fermentation using sunflower seed as substrate. The fungal solid fermented was used in the bioremediation in dairy effluent to reduce O&G. The experiment was done in kinetic from 24 to 168 h and reduced over 90% of the O&G present in the sample after 168 h. Collectively, our work demonstrated the efficiency and applicability of fungal fermented solids in bioremediation and how this process can contribute to a more sustainable wastewater pretreatment, reducing the generation of effluents produced by dairy industries.

     

Emission factors of atmospheric and climatic pollutants from crop residues burning

Biomass burning is a common agricultural practice, because it allows elimination of postharvesting residues; nevertheless, it involves an inefficient combustion process that generates atmospheric pollutants emission, which has implications on health and climate change. This work focuses on the estimation of emission factors (EFs) of PM_2.5, PM₁₀, organic carbon (OC), elemental carbon (EC), carbon monoxide (CO), carbon dioxide (CO₂), and methane (CH₄) of residues from burning alfalfa, barley, beans, cotton, maize, rice, sorghum, and wheat in Mexico. Chemical characteristics of the residues were determined to establish their relationship with EFs, as well as with the modified combustion efficiency (MCE). Essays were carried out in an open combustion chamber with isokinetic sampling, following modified EPA 201-A method. EFs did not present statistical differences among different varieties of the same crop, but were statistically different among different crops, showing that generic values of EFs for all the agricultural residues can introduce significant uncertainties when used for climatic and atmospheric pollutant inventories. EFs of PM_2.5 ranged from 1.19 to 11.30 g kg^?1, and of PM₁₀ from 1.77 to 21.56 g kg^?1. EFs of EC correlated with lignin content, whereas EFs of OC correlated inversely with carbon content. EFs of EC and OC in PM_2.5 ranged from 0.15 to 0.41 g kg^?1 and from 0.33 to 5.29 g kg^?1, respectively, and in PM₁₀, from 0.17 to 0.43 g kg^?1 and from 0.54 to 11.06 g kg^?1. CO₂ represented the largest gaseous emissions volume with 1053.35–1850.82 g kg^?1, whereas the lowest was CH₄ with 1.61–5.59 g kg^?1. CO ranged from 28.85 to 155.71 g kg^?1, correlating inversely with carbon content and MCE. EFs were used to calculate emissions from eight agricultural residues burning in the country during 2016, to know the potential mitigation of climatic and atmospheric pollutants, provided this practice was banned.

Implications: The emission factors of particles, short-lived climatic pollutants, and atmospheric pollutants from the crop residues burning of eight agricultural wastes crops, determined in this study using a standardized method, provides better knowledge of the emissions of those species in Latin America and other developing countries, and can be used as inputs in air quality models and climatic studies. The EFs will allow the development of more accurate inventories of aerosols and gaseous pollutants, which will lead to the design of effective mitigation strategies and planning processes for sustainable agriculture.     

Effect of lanthanum loading on nanosized CeO2-ZnO solid catalysts supported on cordierite for diesel soot oxidation

We report the application of a solid lanthanum–ceria–zinc catalyst in the catalytic regeneration of diesel particulate filters(DPF) in diesel engines.We synthesized a CeO_2–ZnO–La_2O_3(Ce–Zn–La) mixed oxide by a lactic acid-mediated sol–gel method,which efficiently coated cordierite substrates for soot capture and combustion.We studied the effects of La loading on the physicochemical and catalytic properties of Ce–Zn mixed oxide during lowtemperature soot combustion processes.We characterized the synthesized catalysts by X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FTIR),N2 adsorption,Raman spectroscopy,oxygen storage capacity(OSC),and scanning and transmission electron microscopy(SEM and TEM).Thermogravimetric and differential thermal analysis(TGA/DTA)confirmed that the catalysts effectively reduced the soot oxidation temperature.The ternary Ce–Zn–La mixed oxide catalyst with Ce/Zn/La atomic ratio of 2:1:0.5 had the highest catalytic activity and promoted soot oxidation at temperatures below 390°C.This indicated that the large number of oxygen vacancies in the catalyst structure generated oxygen species at low temperatures.Raman spectroscopy measurements revealed the presence of oxygen vacancies and lattice defects in Ce–Zn–La samples,which were key parameters concerning the stability and redox properties of the prepared catalysts.