Indications of Recovery from Hypoxia in the Inner Stockholm Archipelago

Improved benthic conditions compared to the 1990s were found during benthic investigations, including sediment and benthic macrofauna in the inner Stockholm archipelago during 2008. In the 1990s, these areas were dominated by black and laminated surface sediments and very sparse fauna. A clear relationship was found when comparing sediment status with the benthic macrofauna. Reduced surface sediment and impoverished macroinvertebrate community was only found at one sampling station representing an enclosed part of the inner archipelago, whereas the other seven stations, with depths ranging from 20 to 50 m, had oxidized surface sediments and considerable biomasses of benthic macrofauna (6–65 g m⁻²) dominated by the invading polychaete Marenzelleria neglecta. An extrapolation of the results shows that, within the investigated area, the coverage of reduced surface sediments had decreased from approximately 17% in the late 1990s to 4% in 2008.     

Assessment of Blue Mussel <Emphasis Type="Italic">Mytilus edulis</Emphasis> Fisheries and Waterbird Shellfish-predator Management in the Danish Wadden Sea

We assessed the blue mussel Mytilus edulis fishery management scheme introduced in 1994 in the Danish Wadden Sea that regulate fishing vessels, fishery quota, set-aside for mussel-eating birds and established zones closed to mussel fishery. The results showed (i) a reduction in the blue mussel biomass and mussel bed areas in zones closed to fishery, (ii) decrease in eiders Somateria mollissima numbers and increase or stable numbers for oystercatcher Haematopus ostralegus and herring gull Larus argentatus and (iii) that energy estimations based on ecological food requirements for the mussel-eating birds should be at least three times larger, than the amount set-aside in the mussel management scheme. It is concluded that the mussel management scheme had been unable to stabilize or increase the blue mussel stocks and to secure stable or increasing numbers for all target bird species. Thus, it is recommended to revise the present blue mussel management scheme in the Danish Wadden Sea, to continue and improve mussel stock and bird surveys, and to consider novel studies of the mussel-eating birds’ energetics for improved set-aside estimates and future assessments.     

Nitrogen deposition threatens species richness of grasslands across Europe

Evidence from an international survey in the Atlantic biogeographic region of Europe indicates that chronic nitrogen deposition is reducing plant species richness in acid grasslands. Across the deposition gradient in this region (2-44 kg N ha⁻¹ yr⁻¹) species richness showed a curvilinear response, with greatest reductions in species richness when deposition increased from low levels. This has important implications for conservation policies, suggesting that to protect the most sensitive grasslands resources should be focussed where deposition is currently low. Soil pH is also an important driver of species richness indicating that the acidifying effect of nitrogen deposition may be contributing to species richness reductions. The results of this survey suggest that the impacts of nitrogen deposition can be observed over a large geographical range.     

Phthalate levels in Norwegian indoor air related to particle size fraction

Phthalates are found in numerous consumer products, including interior materials like polyvinyl chloride (PVC). Several studies have identified phthalates in indoor air. A recent case-control study demonstrated associations between allergic symptoms in children and the concentration of phthalates in dust collected from their homes. Here we have analyzed the content of selected phthalates in particulate matter (PM): PM(10) and PM(2.5) filter samples collected in 14 different indoor environments. The results showed the presence of the phthalates di-n-butyl phthalate (DBP), butyl benzyl phthalate (BBP), dicyclohexyl phthalate (DCHP) and diethyl hexyl phthalate (DEHP) in the samples. The dominating phthalate in both PM(10) and PM(2.5) samples from all locations was DBP. More than a 10-fold variation in the mean concentration of total phthalates between sampling sites was observed. The highest levels of total phthalates were detected in one children's room, one kindergarten, in two primary schools, and in a computer room. The relative contribution of total phthalates in PM(10) and PM(2.5) was 1.1 +/- 0.3% for both size fractions. The contribution of total phthalates in PM(2.5) to total phthalates in PM(10) ranged from 23-81%, suggesting different sources. Of the phthalates that were analyzed in the PM material, DBP was found to be the major phthalate in rubber from car tyres. However, our analyses indicate that tyre wear was of minor importance for indoor levels of both DBP as well as total phthalates. Overall, these results support the notion that inhalation of indoor PM contributes to the total phthalate exposure.     

Improving soil investigations at brownfield sites using a flexible work strategy and screening methods inspired by the US Environmental Protection Agency's triad approach

Investigations of polluted brownfield sites and sample analyses are expensive, and the resulting data are often of poor quality. Efforts are needed, therefore, to improve the methods used in investigations of brownfield sites to both reduce costs and improve the quality of the results. One approach that could be useful for both of these purposes is the triad strategy, developed by the US Environmental Protection Agency, in which managing uncertainty is a central feature. In the investigations reported here, a field study was conducted to identify possible ways in which uncertainties could be managed in practice. One example considered involves optimizing the uncertainty by adjusting the sizes of samples and the efforts expended in analytical work according to the specific aims of the project. In addition, the potential utility of several toxicity assessment methods for screening sites was evaluated. As well as presenting the results of these assessments, in this contribution we discuss ways in which a flexible work strategy and screening methods inspired of the triad philosophy could be incorporated into the Swedish approach to remediate brownfield sites. A tiered approach taking advantage of field and screening methods is proposed to assess brownfield sites focusing on the response and acceptable uncertainty that are required for the task.     

First compound-specific chlorine-isotope analysis of environmentally-bioaccumulated organochlorines indicates a degradation-relatable kinetic isotope effect for DDT

Compound-specific chlorine-isotope analysis (CSIA-Cl) of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (p,p'-DDT) and 1,1-dichloro-2,2-bis(p-chlorophenyl)ethene (p,p'-DDE) in blubber from Baltic Grey seal (Halichoerus grypus) was performed in order to investigate if a kinetic isotope effect (KIE) could be observed concomitant to environmental degradation of DDT. The delta(37)Cl of p,p'-DDT and p,p'-DDE were -0.69 +/- 0.21 per thousand and -2.98 +/- 0.57 per thousand (1s igma, n = 3), respectively. Both samples were enriched relative to the hypothesized initial isotope composition (-4.34 per thousand), thus indicating a composite KIE associated with the degradation mechanisms pertaining to DDT. An isotope fractionation factor for degradation of dichloromethane, from the literature, was adapted and modified for use in the calculation of DDT degradation. A subsequent simplified Rayleigh distillation model of the DDT chlorine-isotope composition yielded an estimated fraction (f) of 7 +/- 2% of released DDT presently remaining as undegraded compound in the environment. The consistency between the result of the Rayleigh model (f approximately 7%) and the use of the DDT/(DDT + DDE) ratio as a measure of DDT degradation ( approximately 10% undegraded DDT) suggests that the KIE of DDT degradation may be significant, and that the novel approach of CSIA-Cl may be a valuable tool for degradation/persistence studies of lipophilic organochlorines in the environment.     

Experimental determination of efficiency of capping materials during consolidation of metal-contaminated dredged material

Capping has received considerable attention as a method to reduce contaminant transport from contaminated sediments and sub-aqueous disposed dredged materials. Consolidation of dredged material after capping can result in a substantial advection of pore water, into or through the capping layer. The effect of two different capping materials (crushed limestone and gneiss) on the transport of heavy metals and phosphorus during consolidation was studied with a novel experimental design. Capped dredged material was placed in a consolidation cell and pore water expelled during the consolidation was collected for chemical analysis. To support interpretation of the results from this test, interactions between the capping material and the dredged material were also studied in batch tests. The study revealed large differences in the capping efficiency (CE) between the two materials. Both materials were efficient caps for Fe and P (CE>99% with 2cm cap), while limestone also was efficient for Mn (CE>92% with 2cm cap). Contrary to what was expected, capping of dredged material with crushed gneiss increased the release of Ca, Mn, Co, Ni, Cd, and Cu, resulting in negative CE. The batch tests showed that leaching from the crushed gneiss was the source of the observed release of metals. The results also show that the high concentrations of heavy metals in the dredged material were immobilised, probably by sulphides. Protection against re-suspension and oxidation will therefore in many cases be the most important effect of the cap.     

Occupational exposure to beryllium in primary aluminium production

Alumina used in the production of primary aluminium contains Be which partly vaporises from the cryolite bath into the workroom atmosphere. Since Be may be toxic at lower exposure levels than previously thought, the personal exposure to Be among workers in 7 Norwegian primary smelters has been assessed. In total, 480 personal Respicon? virtual impactor full shift air samples have been collected during 2 sampling campaigns and analysed for water soluble Be, Al and Na using inductively coupled plasma optical emission spectrometry. In addition, water soluble F(-) has been measured by ion chromatography. The Be air concentrations in the inhalable, thoracic and respirable aerosol fractions have been calculated. The Be concentrations in the inhalable aerosol fraction vary between the different smelters. The highest GM concentration of Be in the inhalable fraction (122 ng m(-3), n = 30) was measured in the prebake pot room of a smelter using predominantly Jamaican alumina where also the highest individual air concentration of 270 ng m(-3) of Be was identified. The relative distribution of Be in the different aerosol fractions was fairly constant with the mean Be amount for the two sampling campaigns between 44-49% in the thoracic fraction expressed as % of the inhalable amount. Linear regression analysis shows a high correlation between water soluble Be, Al, F and Na describing an average measured chemical bulk composition of the water soluble thoracic fraction as Na(5.7)Al(3.1)F(18). Be is likely to be present as traces in this particulate matter by replacing Al atoms in the condensed fluorides and/or as a major element in a nanoparticle sized fluoride. Thus, the major amount of Be present in the work room atmosphere of Al smelter pot rooms will predominantly be present in combination with substantial amounts of water soluble Al, F and Na.     

Optimising herbicide dose: a straightforward approach to reduce the risk of side effects of herbicides

Public concern of possible effects of pesticides on human health and the environment has lead to an increased pressure on farmers to optimise their use of pesticides. Reducing pesticide doses below the recommended doses whenever possible is a straightforward approach to reduce the risk of adverse side effects. To adopt this approach decision-making has to be improved. The parameters to consider optimising herbicide doses are: weed flora and growth stage, crop competitiveness, climatic conditions, application technique, formulation/adjuvant and combination with other pesticides. In Denmark this information is provided to farmers through the decision support system ‹Plant Protection Online’. Based on input on weed species and densities, climatic conditions, soil type, crop cultivar and expected yield ‹Plant Protection Online’ will provide farmers with optimum herbicide solution usually with doses lower than standard recommended doses.     

Polycyclic aromatic hydrocarbons in ash: determination of total and leachable concentrations

Before wood ash can be used as a soil fertilizer, concentrations of environmentally hazardous compounds must be investigated. In this study, total and leachable concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in four ash samples and one green liquor sludge. The ash sample with the highest carbon content also contained high levels of PAHs; three of the ash samples had total concentrations exceeding the limit permitted by the Swedish Forest Agency for recycling to forest soils. The leachable concentrations were higher for the non-stabilized samples; this was probably due to colloid-facilitated transport of the contaminants in these samples. However, the leachable concentrations were overall relatively low in all the samples studied. The amounts of PAHs introduced to forest soils by additions of stabilized, recyclable ash products will be determined primarily by the rate of weathering of the ash particles and the total concentration of contaminants.