Water management strategies against toxic Microcystis blooms in the Dutch delta.

To prevent flooding of the Dutch delta, former estuaries have been impounded by the building of dams and sluices. Some of these water bodies, however, experience major ecological problems. One of the problem areas is the former Volkerak estuary that was turned into a freshwater lake in 1987. From the early 1990s onward, toxic Microcystis blooms dominate the phytoplankton of the lake every summer. Two management strategies have been suggested to suppress these harmful algal blooms: flushing the lake with fresh water or reintroducing saline water into the lake. This study aims at an advance assessment of these strategies through the development of a mechanistic model of the population dynamics of Microcystis. To calibrate the model, we monitored the benthic and pelagic Microcystis populations in the lake during two years. Field samples of Microcystis were incubated in the laboratory to estimate growth and mortality rates as functions of light, temperature, and salinity. Recruitment and sedimentation rates were measured in the lake, using traps, to quantify benthic-pelagic coupling of the Microcystis populations. The model predicts that flushing with fresh water will suppress Microcystis blooms when the current flushing rate is sufficiently increased. Furthermore, the inlet of saline water will suppress Microcystis blooms for salinities exceeding 14 g/L. Both management options are technically feasible. Our study illustrates that quantitative ecological knowledge can be a helpful tool guiding large-scale water management.     

Water regime of mechanical-biological pretreated waste materials under fast-growing trees.

In this study mechanical-biological pre-treated waste material (MBP) was tested for suitability to serve as an alternative surface layer in combination with fast-growing and water-consumptive trees for final covers at landfill sites. The aim was to quantify evapotranspiration and seepage losses by numerical model simulations for two sites in Germany. In addition, the leaf area index (LAI) of six tree species over the growing season as the driving parameter for transpiration calculations was determined experimentally. The maximum LAI varied between 3.8 and 6.1 m2 m(-2) for poplar and willow clones, respectively. The evapotranspiration calculations revealed that the use of MBP waste material for re-cultivation enhanced evapotranspiration by 40 mm year(-1) (10%) over an 11 year calculation period compared to a standard mineral soil. Between 82% (for LAI(max) = 3.8) and 87% (for LAI(max) = 6.1) of the average annual precipitation (506 mm) could be retained from the surface layer assuming eastern German climate conditions, compared with a retention efficiency between 79 and 82% for a mineral soil. Although a MBP layer in conjunction with water-consumptive trees can reduce vertical water losses as compared to mineral substrates, the effect is not sufficient to meet legal regulations.     

Influence of COM-peptides/proteins on the properties of flocs formed at different shear rates

Coagulation followed by floc separation is a key process for the removal of algal organic matter(AOM) in water treatment. Besides optimizing coagulation parameters,knowledge of the properties of AOM-flocs is essential to maximizing AOM removal.However, the impact of AOM on the floc properties remains unclear. This study investigated how peptides/proteins derived from the cellular organic matter(COM) of the cyanobacterium Microcystis aeruginosa influenced the size, structure, and shape of flocs formed at different shear rates(G). Flocs formed by kaolinite, COM-peptides/proteins and a mixture of the same were studied, and the effect of intermolecular interactions between floc components on floc properties was assessed. The coagulation experiments were performed in a Taylor–Couette reactor, with aluminum(Al) or ferric sulphate(Fe) utilized as coagulants. Image analysis was performed to gauge floc size and obtain data on fractal dimension. It was found that floc properties were affected by the presence of the COM-peptides/proteins and the coagulant used. COM-peptides/proteins increased floc size and porosity and widened floc size distributions. The Fe coagulant produced larger and less compact flocs than Al coagulant. Moreover, the decrease in floc size that occurred in parallel with increase in shear rate was not smooth in progress. A rapid change for the kaolinite-coagulant suspension and two rapid changes for the suspensions containing COM were observed. These were attributed to various intermolecular interactions between floc components participating in coagulation at different G. Based on the results obtained, shear rates suitable for efficient separation of flocs containing COM were suggested.     

Wastewater technology attenuates the toxicity of shisha smoking

Environmental Chemistry Letters -     

Measuring copepod naupliar abundance in a subtropical bay using quantitative PCR

Copepod nauplii are important in plankton food web dynamics, but limited information is available about their ecology due to methodological challenges. Reported here is a new molecular method that was developed, optimized, and tested in laboratory and field samples that uses quantitative PCR (qPCR) to identify and estimate the abundance of nauplii of the planktonic copepod, Parvocalanus crassirostris. The overall approach included collection of bulk zooplankton samples in the field, size fractionation to create artificial cohorts of relatively few developmental stages, obtaining DNA copy number for each size fraction by qPCR amplification of a target gene region, and estimation of the number of animals in each fraction through application of known DNA copy number across developmental stage. Method validation studies found that our qPCR-based approach has comparable accuracy to microscope-based counts of early developmental stages. Naupliar abundance estimates obtained using the two methods on cultured populations were similar; the regression of qPCR estimates on microscope-based counts resulted in a nearly 1:1 ratio (slope = 1.09). The qPCR-based method is superior to traditional identification and quantification methods for nauplii due to its higher taxonomic resolution, sensitive detection over a range of DNA quantities, and relatively high throughput sample processing.     

Risk assessment for selected xenobiotics by bioassay methods with higher plants

Different bioassays with higher plants were approved for use in a bioassay procedure for testing of xenobiotics according to the German Chemicals Act. Selected environmental pollutants (atrazine, cadmium chloride, 2,6-dichlorobenzonitrile, pentachlorophenol, potassium dichromate, thiourea), all from a list of reference chemicals, were tested with these methods. Dose-response curves for growth of oats and turnips were evaluated in soil and vermiculite (nonsorptive substrate), and availability to plants was calculated by comparing the EC₅₀ values for one chemical in both substrates. The most active chemical was atrazine, followed by 2,6-dichlorobenzonitrile, pentachlorophenol, potassium dichromate, cadmium chloride, and thiourea. The least available compound to plants was pentachlorophenol, tested with turnips (Brassica rapa var.rapa). The strongest inhibition of germination, demonstrated in an in vitro assay with garden cress (Lepidium sativum), was found with 2,6-dichlorobenzonitrile, the lowest with atrazine. The effect of an extended exposure of the plants to the chemicals was evaluated in a long-term bioassay with oats (Avena sativa) in hydroponic culture. Several dose-response curves during the growing period were derived. It was found that the EC₅₀ values for atrazine and thiourea decreased markedly during the first four weeks; thereafter the changes were much smaller. As an overall conclusion, a bioassay procedure is proposed that can be included in the graduated plan recommended by the German Chemicals Act.     

Chemisch-analytische Charakterisierung technischen tierischen Fettes aus einer Tierkörperbeseitigungsanstalt

Aims and Scope

German rendering plants produce 300,000 tons of animal fat per year. Until recently, these raw products have been in wide use as nutritional additive for cattle and other animals fodder but now they have been banned due to their assumed role in BSE infection. Therefore, alternative fields of usage are required. In this context the Deutsche Bundesstiftung Umwelt (DBU) is sponsoring a joint research project which deals with the production and testing of cooling lubricants based on animal fat esters.

Methods

In a first step, characteristics and quality of the animal fat were analyzed and monitored for a whole year in order to identify e.g. seasonal variations. The investigations covered the following fat specific and trace analytical parameters: total contamination, sulfates ash, water content, peroxide number, iodine value, kinematical viscosity, neutralisation number (free fatty acids), fatty acid spectra, elements / heavy metals (Al, B, Ca, Cd, Cr, Cu, Fe, K, Mo, Mn, Na, Ni, P, Pb, S, Sn, V, W and Zn), polycyclic aromatic hydrocarbons, polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans.

Results

Valuable hints on the design of the technical process of fatty acid methylesters production were gained by regarding the fat specific parameters. For example, filtration and dewatering of the fats proved necessary. Small variations of iodine value, viscosity and fatty acid spectrum pointed at a quite constant composition of the raw material in the course of the year. Clues to the degree of hydrolysis and decay of the fat were given by the share of free fatty acids. The saturated fatty acids, most interesting for the production of the cooling lubricants, were present in the fatty acid spectra in the rage of 36.4% to 54.6%. Trace analytical investigations concerning inorganic and organic pollutants proved a low basic contamination of the technical animal fats.

Outlook

Next step will be to present the pilot plant for the production of the cooling lubricants and further analytical results in context with the production process.     

Mollusc communities in Bulgarian fens: predictive power of the environment,vegetation, and spatial structure in an isolated habitat

Mollusc communities of previously unexplored Bulgarian fens were studied in order to determine and generalise the patterns of species richness and composition along the mineral richness gradient. The aim was also to compare predictive values of the environment, vegetation and spatial structure. Altogether, 44 mollusc species were recorded at 40 treeless fen sites. Species richness varied from 0 to 18 species per site, and it was positively associated with the mineral gradient and negatively with altitude. However, the best predictor was obtained using plant species composition. All explanatory variables had higher effect on land snails than on the entire mollusc assemblage (including aquatic species). Species richness and abundance were significantly and positively correlated with the species composition turnover; the communities were highly nested, with poor sites having subsets of the fauna found in the richest. The main direction of mollusc species turnover was highly associated with that observed for vegetation, and the main gradient of plant species composition was able to explain nearly 20% of total variation in mollusc data. We found that spatial structure explained by far the highest proportion of independent variation, which reflected the high level of geographical isolation of Bulgarian fens and regional differences independent of any environmental variation. Our results demonstrate (1) the general role of mineral richness gradient for structuring mollusc communities in fens, (2) the pivotal indicator role of plant species composition in predicting species composition of mollusc communities, despite being trophically independent and (3) the effect of isolation and origins of the habitat on species composition: most species have wide geographical distributions within the habitat type, and geographical patterns within Bulgaria may have a stochastic element.