Kinetics of the adsorption and desorption of radionuclides of Co, Mn, Cs, Fe, Ag and Cd in freshwater systems: experimental and modelling approaches

The sorption and release kinetics of 54Mn, 58Co, 59Fe, 109Cd, 110mAg and 134Cs by freshwater suspended particles were investigated to better identify the biogeochemical processes involved and to obtain suitable data for improving models describing radionuclide migration in freshwater streams. In order to observe any seasonal variability in the interaction of radionuclides with natural particles, experiments were performed both in winter and in summer during a phytoplanktonic bloom. Two kinetic models are compared in this paper: the "one-step reversible" model, based on the hypothesis that the transfer of radionuclides between water and suspended solids is governed by a reversible reaction, and the "two-successive-step reversible" model, which assumes two distinct types of sites or reactions on the solid phase. The "one-step reversible" model is generally unable to describe properly the exchange kinetics; this result shows that at least two processes are generally involved in radionuclide exchange between water and suspended particles. On the contrary, a model involving the existence of two successive reversible reactions properly simultes both the sorption and release kinetics. The determination of the kinetic coefficients allows quantitative assessment of the relative importance and kinetics of the processes. In particular, it has been shown that, except for Cs and Cd, major fractions of the radionuclides are associated at equilibrium with particulate sites involving strong interactions. The kinetics to reach this equilibrium depend on seasonal conditions, especially for Co and Mn: the transfer of Co and Mn to particulate sites involving strong interactions is much slower in winter. The distribution of the radionuclides between water and particulate sites involving weak interactions also shows seasonal variations for Co, Mn, Fe and Ag: the capacity to associate radionuclides is much higher in summer for Co and Mn, while the inverse tendency is observed for Fe and Ag. For Cs and Cd, no significant seasonal differences were observed.     

Persistent organochlorine residues in human breast milk from Hanoi and Hochiminh City, Vietnam: contamination, accumulation kinetics and risk assessment for infants

Despite the ban on persistent organochlorines (OCs) in most of the developed nations, their usage continued until recently in many Asian developing countries including Vietnam, for agricultural purposes and vector-borne disease eradication programs. In this study, we collected human breast milk samples from the two big cities in Vietnam: Hanoi (n=42) and Hochiminh (n=44) and determined the concentrations of persistent OCs such as PCBs, DDT and its metabolites (DDTs), hexachlorocyclohexanes (HCHs), hexachlorobenzene (HCB), chlordane compounds (CHLs) and tris-4-chlorophenyl-methane (TCPMe). The contamination pattern of OCs was in the order of DDTs > PCBs > HCHs > CHLs approximately HCB approximately TCPMe. Compilation of available data indicated that DDT residue levels in human breast milk from Vietnam were among the highest values reported for Asian developing countries as well as developed nations. This result suggests recent usage of DDTs in both north and south Vietnam. Interestingly, in both cities, the p,p'-DDT portion was higher in multiparas than those in primiparas. Considering the fact that the interval between the first and the second child of a mother in Vietnam is usually short, this result probably indicates continuous intake of DDTs in the population. Analysis of infant exposure to DDTs via breast milk suggested that the daily intake rates for number of individuals are close to or above the threshold for adverse effects which may raise concern on children health.     

Contamination by selected chlorinated pesticides in surface waters in Hanoi, Vietnam

Fifteen insecticides, which were banned in Vietnam in the period from 1990 to 1998, were chosen for the investigation of surface water samples in Hanoi and its surroundings. The investigation was focused on an area of approximately 30 by 20 km. Thirty water samples, in total were analysed: 11 samples from the Red river, seven from the Duong river, four from various lakes (West lake, Thuyen Quang, Bay Mau, Ba Mau), six from irrigation canals and two samples from wells. The procedure was repeated in November 1998 and in August 1999. The results showed that the contamination of the banned pesticides was highest in the rivers and then in the irrigation canals, followed by the lakes and wells. These pesticides could hardly be determined in just two drinking water samples (wells) and their concentrations rarely exceeded detection limits (0.05-0.25 ng l(-1)). The mean concentrations of sigmaHCHs (alpha, beta, gamma, delta-HCH) and sigmaDDTs (2,4'-, 4,4'-DDE; 2,4'-, 4,4'-DDD; 2,4'-, 4,4'-DDT) in the rivers were 17.2 +/- 71.8 and 43.7 +/- 79.9 ng l(-1) in the dry season (DS, November 1998), 29.3 +/- 117 and 56.1 +/- 65.6 ng l(-1) in the rainy season (RS, August 1999), respectively. However, the highest concentration of DDTs detected in a river sample (DS): 0.324 microg l(-1) was much lower than their allowable limit of concentration in surface waters, which is accorded with Criteria of Vietnam (1995) (DDTs < 10 microg l(-1)). Moreover, endrin, heptachlor, aldrin were also detected in most of water samples with considerable mean concentrations in rivers: 25.3 +/- 40.5, 17.4 +/- 23.8, 11.0 +/- 9.02 ng l(-1) in the DS and 18.5 +/- 23.2, 19.3 +/- 29.0, 12.8 +/- 8.44 ng l(-1) in the RS, respectively. Heptachlor epoxide (isomer A) and dieldrin were detected in some water samples with lowest concentrations.     

The forest frontier in the Global South: Climate change policies and the promise of development and equity

Halting forest loss and achieving sustainable development in an equitable manner require state, non-state actors, and entire societies in the Global North and South to tackle deeply established patterns of inequality and power relations embedded in forest frontiers. Forest and climate governance in the Global South can provide an avenue for the transformational change needed—yet, does it? We analyse the politics and power in four cases of mitigation, adaptation, and development arenas. We use a political economy lens to explore the transformations taking place when climate policy meets specific forest frontiers in the Global South, where international, national and local institutions, interests, ideas, and information are at play. We argue that lasting and equitable outcomes will require a strong discursive shift within dominant institutions and among policy actors to redress policies that place responsibilities and burdens on local people in the Global South, while benefits from deforestation and maladaptation are taken elsewhere. What is missing is a shared transformational objective and priority to keep forests standing among all those involved from afar in the major forest frontiers in the tropics.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01602-1.     

Preparation and characterization of a new TiO2/SiO2 composite catalyst for photocatalytic degradation of indigo carmin

The TiO₂/SiO₂ composite was prepared by means of the SiO₂-particle-entrapment method. The FTIR data showed the presence of Si–O–Ti stretching vibration band at 970 cm⁻¹ in the TiO₂/SiO₂ composite, suggesting a reaction between TiO₂ and silica on the TiO₂ particle surface during the silicagel formation around the TiO₂ particles. The photocatalytic efficiency of TiO₂ immobilized in silicagel was compared with that of the conventional TiO₂ Degussa P25 catalyst. For this purpose, the degradation of indigo carmin (IC) dye was used as model molecule in the tests. The effect of operational parameters such as catalyst loading and dye concentration on the photocatalytic degradation of the model dye was investigated. The rate of degradation increased with increasing catalyst loading, and when the concentration of the dye decreases.     

Measuring the association of environmental,corporate, financial,and social CSR: evidence from fuzzy TOPSIS nexus in emerging economies

Environmental Science and Pollution Research - The purpose of this research is to measure the combing impact of corporate social responsibility on company performance and to conduct a comparative...     

A robust method for collecting and processing the on-road instantaneous data of fuel consumption and speed for motorcycles

ABSTRACT

Using the laboratory-based fuel consumption models for predicting real-world fuel consumption requires the measurement of data under certain conditions to obtain high accuracy of predicted result. Therefore, it is necessary to develop a logging device for measuring the real-time fuel consumption and speed of vehicle on the road. This article presents a study on developing the on-board data logging device to collect real-world data of fuel consumption and speed for motorcycles with the update rate of 1 Hz. The instantaneous speed of the motorcycle was determined based on the rotational speed of the wheel and the wheel radius. Another module was used to determine the instantaneous fuel consumption rate (FR) though measuring the duration injection pulse. The relationship between the duration injection pulse and the injected amount of fuel was established with high correlation coefficient of 0.997. In addition, a filter was designed to remove noise in the dataset collected using the data logging device. The random errors in the speed and the FR profiles were detected and replaced, the percentage of these errors is 1.8% and 2.4%, respectively. The developed method is a precise one for transient fuel consumption and speed measurement. In chassis dynamometer test, the average deviation between steady speed measured by the chassis and the data logging device is only approximately 0.35%. At transient state, the biggest deviation between these two datasets is less than 3.5%. The average FR at steady speed measured by the developed method is slightly different from the one measured by the carbon balance method. The difference is 0.9%, 2.5%, and 0.25% at the speeds of 30 km/h, 50 km/h, and 70 km/h, respectively. Following the transient test cycle, the fuel consumption measured by the developed method is 4.35% lower than that determined by the carbon balance method.

Implications: A robust method for collecting and processing the on-road instantaneous data of fuel consumption and speed was developed for motorcycles. The proposed method can record well the real-world driving data for motorcycles, including the fuel consumption and speed, with the update rate of 1 Hz. The filter was designed to minimize noise while maintaining data integrity of the collected dataset, the percentage of errors in the the speed and the FR profiles is 1.8% and 2.4%, respectively. The proposed method, therefore, can be used as effective tools for future studies relating to the fuel consumption and emission of motorcycles on the road.     

The evolution and impact of testing baghouse filter performance

In 1995, the US. Environmental Protection Agency (EPA) initiated the Environmental Technology Verification (ETV) program for the purpose of generating both independent and credible performance verification of innovative technologies and helping to accelerate acceptance of these products into the marketplace to further benefit the environment and protect public health. The EPA has approved a testing protocol under this program to verify the performance of commercially available filtration products for pulse-jet baghouses in removingfine particulate matter (aerodynamic diameter<2.5 microm; PM2.5). This verification testing protocol was later used as a basis for the development of the American Society for Testing and Materials (ASTM) Method D6830-02 and the International Organization for Standardization (ISO) Method 11057. The South Coast Air Quality Management District (SCAQMD) in California and the EPA s Office of Air Quality Planning and Standards (OAQPS) highly encourage the use of ETV/ASTM-verified filtration media. This paper highlights the evolution of the standard test methods, the EPA's and SCAQMD's regulatory activities, the benefits of using verified filtration media, and the importance of including the filter performance testing in future consideration of baghouse permitting, baghouse operation and maintenance (O&M) plans, quality assurance/quality control (QA/QC), and bag monitoring plans.     

Managing flood risks in the Mekong Delta: How to address emerging challenges under climate change and socioeconomic developments

Climate change and accelerating socioeconomic developments increasingly challenge flood-risk management in the Vietnamese Mekong River Delta—a typical large, economically dynamic and highly vulnerable delta. This study identifies and addresses the emerging challenges for flood-risk management. Furthermore, we identify and analyse response solutions, focusing on meaningful configurations of the individual solutions and how they can be tailored to specific challenges using expert surveys, content analysis techniques and statistical inferences. Our findings show that the challenges for flood-risk management are diverse, but critical challenges predominantly arise from the current governance and institutional settings. The top-three challenges include weak collaboration, conflicting management objectives and low responsiveness to new issues. We identified 114 reported solutions and developed six flood management strategies that are tailored to specific challenges. We conclude that the current technology-centric flood management approach is insufficient given the rapid socioecological changes. This approach therefore should be adapted towards a more balanced management configuration where technical and infrastructural measures are combined with institutional and governance resolutions. Insights from this study contribute to the emerging repertoire of contemporary flood management solutions, especially through their configurations and tailoring to specific challenges.