ESF Workshop

Dioxin and PCB monitoring programs for food and feeding stuff in most countries of the world, including many European Countries are currently inadequate. Better control of food production lines and food processing procedures is needed to minimize entry of dioxin to the food chain and will help to avoid dioxin contamination accidents. This would also improve the ability to trace back a possible contamination to its source. European guidelines for monitoring programs should be established to ensure comparable and meaningful results. These guidelines should define the minimum requirements for the design of monitoring programs, analytical methods, and quality assurance. Though data from Northern Europe shows that the general population exposure to dioxin and PCB has decreased during the last ten years these compounds continue to be a risk of accidental contamination of the food chain. The most prominent recent example is the Belgian dioxin contamination of feeding stuff in 1999. The Belgian dioxin contamination was not detected due to dioxin monitoring programs but by their direct biological effects seen in animals. Four other cases of dioxin contamination have been detected in Europe since 1997 due to local monitoring programs. One of them (citrus pulp pellets 1998) was in a much larger scale than the Belgian dioxin contamination. The general population's exposure to dioxins and PCBs is still in the same range (1-4 pg WHO-TEQ/kg body weight and day) as the recently revised WHO tolerable daily intake (TDI). There is concern that short-term high level exposure to dioxins, furans, and PCB may cause biological effects on the human fetal development and further research is required. Further actions to control sources building on considerable advances already made in many countries may need to be supplemented by measures to prevent direct contamination of feeding stuff or food to reduce general population exposure further.     

Full-spectrum analysis of natural gamma-ray spectra

In this paper, a new system to measure natural gamma-radiation in situ will be presented. This system combines a high-efficiency BGO scintillation detector with full-spectrum data analysis (FSA). This technique uses the (nearly) full spectral shape and the so-called 'standard spectra' to calculate the activity concentrations of 40K, 232Th and 238U present in a geological matrix (sediment, rock, etc.). We describe the FSA and the determination of the standard spectra. Standard spectra are constructed for various geometries and a comparison in intensity and shape will be made. The performance of such a system has been compared to a more traditional system, consisting of a NaI detector in combination with the 'windows' analysis. For count rates typically encountered in field experiments, the same accuracy is obtained 10-20 times faster using the new system. This allows for shorter integration times and hence shorter measurements or a better spatial resolution. The applicability of such a system will be illustrated via an example of an airborne experiment in which the new system produced results comparable to those of much larger traditional systems. This paper will conclude with a discussion of the current status of the system and an outlook for future research.     

Radionuclide fluxes at a plant manufacturing dicalcium phosphate for domestic animals

We have studied a phosphate rock plant which produces dicalcium phosphate (DCP), used as a source of calcium and phosphorus for domestic animals. A by-product in the manufacturing process is calcium chloride which is used in the oil industry, the food industry and as road-salt. The objectives of our study were to describe the fluxes of radionuclides from the 238U decay series and to estimate the radiation doses to workers at the plant. The radionuclides in the phosphate rock were found to be in secular radioactive equilibrium with 238U, with an average activity concentration of 837 Bq kg-1. Separation and concentration processes were observed at different stages in the plant. Most of the 226Ra was found in the calcium chloride, while the major part of the 238U, about 950 Bq kg-1, was found in the dicalcium phosphate. The annual occupational effective dose to the workers was found to be below the 1 mSv limit recommended by ICRP (1991a) for the public. This study has shown a good example of an important non-nuclear industry with a high input of natural radionuclides with several conceivable pathways to man.     

Radon exhalation from uranium mill tailings: experimental validation of a 1-D model

TRACI, a model based on the physical mechanisms governing the migration of radon in unsaturated soils, has been developed to evaluate the radon flux density at the surface of uranium mill tailings. To check the validity of the TRACI model and the effectiveness of cover layers, an in situ study was launched in 1997 with the French uranium mining company, COGEMA. The study consisted of continuous measurements of moisture content, suction, radon concentration at various depths inside a UMT cover, and flux density at its surface. An initial analysis has shown that radon concentration and flux density, as calculated with a steady-state diffusion model using monthly averaged moisture contents, are in good agreement with measured monthly averaged concentrations and flux densities.     

Contamination of Austrian soil with caesium-137

Austria ranks among the countries that have been most strongly affected by the Chernobyl fallout. The mean contamination with 137Cs is 21.0 kBq/m2, of which 18.7 kBq/m2 is due to the Chernobyl accident, whereas global fallout contributes 2.3 kBq/m2. Maximum values of total 137Cs contamination are nearly 200 kBq/m2. Total deposition of Chernobyl 137Cs on Austrian territory is 1.6 PBq or a fraction of around 2% of the 137Cs released from the reactor. 2115 measurements were used to draw the Austrian "caesium map". The geographical pattern of fallout distribution shows regional differences of contamination as high as 1:100.     

Improvements in modeling sagebrush concentrations of radioiodine released from the Hanford site

The Hanford Environmental Dose Reconstruction Project estimated the radiation dose to individuals from historical emissions of radioactive materials from the Hanford Site in Washington State. Project validation studies using predicted activity concentrations of 131I on sagebrush (Artemisia tridentata) showed a systematic underestimation against historical data during cold weather months, indicating a need for sagebrush model improvement. A deposition model for semi-volatile organic materials presented by Komp and McLachlen (Environ. Sci. Tech. 31 (1997) 886-890) is adapted here for gaseous iodine onto sagebrush. The deposition model includes a temperature-dependent term based on an integrated van't Hoff equation. Calibration data for the model are obtained from a release of 131I in 1963. Modeling results for releases in 1946 show a good match between historical data and predicted results using the new model. The new model shows improvement over interception-fraction type models, but requires plant-type-specific calibration data.     

Heavy metal anomalies in lagoon sediments related to intensive agriculture in Altata-Ensenada del Pabellón coastal system (SE Gulf of California)

Heavy metal concentrations were examined in surface sediments from 79 sites within the Altata-Ensenada del Pabellon lagoon system. Data were normalized to separate natural from anthropogenic factors using aluminum and lithium as conservative elements and following two different discriminating criteria. For the normalization process, the natural metal concentrations were assumed to vary consistently with aluminum and lithium, unless the metal contents were of human origin. Strong linear correlations (P < .001) were observed between the conservative elements and the metals measured. According to Szefer's normalizing criteria, about 90% of the polluted sites, for at least one metal, occurred near agricultural discharge drains. In accordance with the Muller [Umschau 79 (1979) 778.] scale, this lagoon system is subject to pollutant effects only with regard to Pb (moderately to strongly polluted). It was concluded that either Al and Li could be useful to normalize granulometric variability in heavy metal studies of these lagoon sediments, and that Summers' normalization criterion proved more rigorous than Szefer's for these types of sediments.     

Radionuclide transfer to fruits: a critical review. Introduction

This paper provides a brief introduction to fruit, their definition, classification and geographical distribution. In the following review, the term "fruit" refers not to a well-defined botanical plant part but, in the horticultural sense, to a component of the human diet generally consumed as a dessert item. Plants that bear fruits cover a vast range of morphological and physiological traits. A generic classification of fruit-bearing plants is proposed for use in studies on radionuclide transfer to fruit.     

Radionuclide transfer to fruits: A critical review. Foreword

After completion of the (Validation of Environmental Model Predictions) (VAMP) and (BIOspheric Model Validation Study) (BIOMOVS II) Programmes, the Division of Radiation and Waste Safety of the IAEA decided to promote a new co-ordinated research programme to continue activities in the area of biosphere modelling. As a result, the BIOMASS Programme on BIOsphere Modelling and ASSessment was launched in Vienna in October 1996. The Programme is scheduled to finish in October 2000. The overall objective of BIOMASS is to provide an international focal point in the area of biosphere assessment modelling. There are 3 Themes and 11 working groups in BIOMASS. The objective of the Theme 3 Fruits Working Group is to improve understanding of the uptake and transfer of radionuclides from different sources to fruit. As part of the work programme, a review was undertaken of the experimental, field and modelling information on the transfer of radionuclides to fruit.     

Environmental Impacts of the Akosombo Dam and Effects of Climate Change on the Lake Levels

The Akosombo dam was constructed on the Volta river primarily for the generation of hydropower. The resultant Volta lake which was formed between 1962 and 1966 in Ghana will probably long be one of the greatest man-made lakes. It produces 912MW of electricity at its maximum operating capacity. The Akosombo hydroelectric project (HEP) was meant among others to open up Ghana to rapid industrialization and hence modern development. Other positive impacts of the HEP include fishing, farming, transportation and tourism. However, there are equally negative impacts, some of which the project did not envisage and these are felt on the physical, biological and human subsystems within the immediate project environments and places much more distant from them. Recently, there have been declines in the lake levels resulting most probably from inadequate rainfall and/or runoff from the river catchments that feed the lake, and also from the observed rising temperatures. Comparisons of the runoff from two most important tributaries of the Volta (White Volta and Oti) for two time periods of 1951–1970 and 1971–1990 showed reductions in mean streamflows of 23.1% on the White Volta and 32.5% on the Oti. Similarly, a plot of the mean annual temperatures for the upper Volta basin indicated a 1^C rise in temperature from 1945–1993.