The impact of behavioral and physiological maternal effects on offspring sex ratio in the common snapping turtle,<Emphasis Type="Italic"> Chelydra serpentina</Emphasis>

Theory suggests that maternal effects are especially important in organisms with environmentally-sensitive sex-determining mechanisms. However, there is no substantive body of empirical evidence to confirm this conjecture. We integrated field and laboratory studies to jointly evaluate the significance of behavioral (nest-site choice) and physiological (yolk hormone allocation) maternal effects on offspring sex ratio in the common snapping turtle (Chelydra serpentina), a species with temperature-dependent sex determination (TSD). Of the 16 microhabitat variables measured, only three (south, east, and total overstory vegetation cover) were significantly correlated with nest temperature: cooler nests were located under more vegetation cover. In turn, these microhabitat predictors of nest temperature, and nest temperature itself, may influence nest sex ratio: shadier, cooler nests were more likely to produce a higher proportion of male offspring than less shady, warmer nests. Analysis of eggs from these same nests incubated in a common garden design in the laboratory revealed that clutch sex ratio was unaffected by levels of yolk estradiol, yolk testosterone, or their interaction. Examination of both behavioral and physiological maternal effects revealed no concordant impact on offspring sex ratio. However, eggs from nests that produced male-biased sex ratios in the field yielded higher proportions of males under constant-temperature conditions in the laboratory. Our study confirms the importance of behavioral maternal effects in nature on offspring sex ratios in species with TSD, while also revealing the potential presence of a predisposition for sex-ratio production underlying TSD in this system.Communicated by S. Krackow     

关于欧盟植物保护品对鸟类和哺乳动物的风险评估的反思：过去、现在和未来

植物保护品在农作物上的使用会导致鸟类和哺乳动物接触有毒化学物质。在欧盟，关于此类暴露的风险评估均以当前(2009)欧洲食品安全局(EFSA)颁布的指导性文件为依据，与之前的版本相比，该文件在理论风险评估的可实现性方面有所提高(SANCO/4145/2000)。自从7年前实施2009 EFSA 指导性文件以来，基于此已经对众多植物保护品的毒性进行了成功地评估。然而，在今后的修订版本中仍然存在需要改进的重要方面。这篇焦点文章讨论了目前方案的风险评估经验，包括输入参数的保守水平和监管当局的解释以及如何在不远的将来对指导性文件进行修订提出建议。明确了推进指导文件的几方面建议，例如与生态相关的鸟类和哺乳动物生殖端点的推导和情境风险评估中建模方法的使用。在完善现有数据库方面，本文也有所强调，包括校对全欧洲相关焦点物种和扩大食物残留数据库。为了能够在将来形成一个真实可用的指导性文件，强烈建议在产业、监管和欧洲食品安全局等部门之间进行开放和建设性的沟通和交流。这样的合作也将鼓励会员国之间的融合，从而减轻产业和监管机构工作负荷。
精选自Amy C. Brooks, Mike Fryer, Alan Lawrence, Juan Pascual, Rachel Sharp. Reflections on bird and mammal risk assessment for plant protection products in the European Union: past, present and future. Environmental Toxicology and Chemistry: Volume 36, Issue 3, pages 565–575, July 2017. DOI: 10.1002/etc.3719
详情请见http://onlinelibrary.wiley.com/wol1/doi/10.1002/etc.3719/full
     

Review of unsaturated-zone transport and attenuation of volatile organic compound (VOC) plumes leached from shallow source zones

Reliable prediction of the unsaturated zone transport and attenuation of dissolved-phase VOC (volatile organic compound) plumes leached from shallow source zones is a complex, multi-process, environmental problem. It is an important problem as sources, which include solid-waste landfills, aqueous-phase liquid discharge lagoons and NAPL releases partially penetrating the unsaturated zone, may persist for decades. Natural attenuation processes operating in the unsaturated zone that, uniquely for VOCs includes volatilisation, may, however, serve to protect underlying groundwater and potentially reduce the need for expensive remedial actions. Review of the literature indicates that only a few studies have focused upon the overall leached VOC source and plume scenario as a whole. These are mostly modelling studies that often involve high strength, non-aqueous phase liquid (NAPL) sources for which density-induced and diffusive vapour transport is significant. Occasional dissolved-phase aromatic hydrocarbon controlled infiltration field studies also exist. Despite this lack of focus on the overall problem, a wide range of process-based unsaturated zone - VOC research has been conducted that may be collated to build good conceptual model understanding of the scenario, particularly for the much studied aromatic hydrocarbons and chlorinated aliphatic hydrocarbons (CAHs). In general, the former group is likely to be attenuated in the unsaturated zone due to their ready aerobic biodegradation, albeit with rate variability across the literature, whereas the fate of the latter is far less likely to be dominated by a single mechanism and dependent upon the relative importance of the various attenuation processes within individual site - VOC scenarios. Analytical and numerical modelling tools permit effective process representation of the whole scenario, albeit with potential for inclusion of additional processes - e.g., multi-mechanistic sorption phase partitioning, and provide good opportunity for further sensitivity analysis and development to practitioner use. There remains a significant need to obtain intermediate laboratory-scale and particularly field-scale (actual site and controlled release) datasets that address the scenario as a whole and permit validation of the available models. Integrated assessment of the range of simultaneous processes that combine to influence leached plume generation, transport and attenuation in the unsaturated zone is required. Component process research needs are required across the problem scenario and include: the simultaneous volatilisation and dissolution of source zones; development of appropriate field-scale dispersion estimates for the unsaturated zone; assessment of transient VOC exchanges between aqueous, vapour and sorbed phases and their influence upon plume attenuation; development of improved field methods to recognise and quantify biodegradation of CAHs; establishment of the influence of co-contaminants; and, finally, translation of research findings into more robust practitioner practice.     

The role of design issues in work-related fatal injury in Australia

PROBLEM: This study aimed to provide an assessment of the contribution of design to the occurrence of fatal work-related injuries in Australia. METHODS: The Australian National Coroners' Information System was the data source for fatal injuries. Deaths resulting from workplace injuries on or between 1 July 2000 and 30 June 2002 were included. RESULTS: Seventy seven (37%) of the 210 identified workplace fatalities definitely or probably had design-related issues involved. In another 29 (14%), the circumstances were suggestive that design issues were involved. The most common scenarios involved problems with rollover protective structures and/or associated seat belts; inadequate guarding; lack of residual current devices; inadequate fall protection; failed hydraulic lifting systems in vehicles and mobile equipment; and inadequate protection mechanisms on mobile plant and vehicles. SUMMARY: Design is a significant contributor to work-related fatal injury in Australia. There is considerable scope for preventing serious work-related injury through improving design of plant, equipment, and vehicles used for work-related purposes.     

Polychlorinated biphenyls (PCBs) and Polybrominated Diphenyl ethers (PBDEs) in three fish species from an estuary in the southeastern coast of Brazil

Polychlorinated biphenyls (PCBs) and Polybrominated Diphenyls Ethers (PBDEs) are two highly lipophilic classes of persistent organic pollutants able to resist degradation and with the ability to bioaccumulate through the food chain. In Brazil, there are still few studies on PCBs and PBDEs in aquatic organisms. In this study, we determined the levels of PBDEs and PCBs in three different fish species from the Ilha Grande Bay, located in the southern state of Rio de Janeiro, Brazil. PBDEs levels were very low, with values below the limit of quantification. PCBs concentrations ranged from 2.29 to 27.60 ng g^?1 ww in muscle and from 3.41 to 34.22 ng g^?1 ww in liver of the three investigated fish species. Significant positive correlations were established between PCBs concentration and fish biometric variables in mullet (length and lipid content) and a statistically significant change between seasons in croaker was observed.     

Validating a nondestructive optical method for apportioning colored particulate matter into black carbon and additional components

Exposure of black carbon (BC) is associated with a variety of adverse health outcomes. A number of optical methods for estimating BC on Teflon filters have been adopted but most assume all light absorption is due to BC while other sources of colored particulate matter exist. Recently, a four-wavelength-optical reflectance measurement for distinguishing second hand cigarette smoke (SHS) from soot-BC was developed (Brook et al., 2010; Lawless et al., 2004). However, the method has not been validated for soot-BC nor SHS and little work has been done to look at the methodological issues of the optical reflectance measurements for samples that could have SHS, BC, and other colored particles. We refined this method using a lab-modified integrating sphere with absorption measured continuously from 350 nm to 1000 nm. Furthermore, we characterized the absorption spectrum of additional components of particulate matter (PM) on PM(2.5) filters including ammonium sulfate, hematite, goethite, and magnetite. Finally, we validate this method for BC by comparison to other standard methods. Use of synthesized data indicates that it is important to optimize the choice of wavelengths to minimize computational errors as additional components (more than 2) are added to the apportionment model of colored components. We found that substantial errors are introduced when using 4 wavelengths suggested by Lawless et al. to quantify four substances, while an optimized choice of wavelengths can reduce model-derived error from over 10% to less than 2%. For environmental samples, the method was sensitive for estimating airborne levels of BC and SHS, but not mass loadings of iron oxides and sulfate. Duplicate samples collected in NYC show high reproducibility (points consistent with a 1:1 line, R(2) = 0.95). BC data measured by this method were consistent with those measured by other optical methods, including Aethalometer and Smoke-stain Reflectometer (SSR); although the SSR looses sensitivity at filter loadings above 90 ng/mm(2). Furthermore, positive correlations (R(2) = 0.7) were observed between EC measured by NIOSH Method 5040 on quartz filters and BC measured in co-located Teflon filter samples collected from both heating and non-heating seasons. Overall, the validation data demonstrates the usefulness of this method to evaluate BC from archived Teflon filters while potentially providing additional component information.     

Towards resolving the phosphorus chaos created by food systems

Ambio - The chaotic distribution and dispersal of phosphorus (P) used in food systems (defined here as disorderly disruptions to the P cycle) is harming our environment beyond acceptable limits. An...