Amorphous oxides of manganese as new sorbents of strontium ions

Samples with the best adsorption properties are selected as a result of investigations conducted on synthesis of manganese-dioxide-based materials and study of their physicochemical properties. Materials were selected on the basis of their low cost and the simplicity of their production technology. In the laboratory the synthesis and analyses of materials was carried out for selected samples. The sorption of a series of elements is studied for a more detailed investigation of materials obtained. The results obtained will promote the synthesis of materials with improved adsorption properties with the aim of their application for purification of water from strontium. It is shown that the most promising way for amendment of manganese oxide is modification of this material using acid-resistant oxides. These oxides are also less expensive than existing sorbents for strontium.     

A study on engineering characteristics of asphalt concrete using filler with recycled waste lime

This study focuses on determining the engineering characteristics of asphalt concrete using mineral fillers with recycled waste lime, which is a by-product of the production of soda ash (Na(2)CO(3)). The materials tested in this study were made using a 25%, 50%, 75%, and 100% mixing ratio based on the conventional mineral filler ratio to analyze the possibility of using recycled waste lime. The asphalt concretes, made of recycled waste lime, hydrated lime, and conventional asphalt concrete, were evaluated through their fundamental engineering properties such as Marshall stability, indirect tensile strength, resilient modulus, permanent deformation characteristics, moisture susceptibility, and fatigue resistance. The results indicate that the application of recycled waste lime as mineral filler improves the permanent deformation characteristics, stiffness and fatigue endurance of asphalt concrete at the wide range of temperatures. It was also determined that the mixtures with recycled waste lime showed higher resistance against stripping than conventional asphalt concrete. It was concluded from various test results that a waste lime can be used as mineral filler and, especially, can greatly improve the resistance of asphalt concrete to permanent deformation at high temperatures.     

Microbial PCB dechlorination in dredged sediments and the effect of moisture

Evidence of reductive dechlorination of polychlorinated biphenyls (PCBs) in sediments was investigated in Hudson River sediments dredged and encapsulated in 1978 at Moreau, NY. The effect of different moisture contents in dredged sediments on dechlorination and dechlorinating microorganisms was also determined using PCB-spiked sediments in which the moisture level was adjusted by simulating a dewatering process. The congener pattern of PCBs indicated that the dechlorination in the dredged sediments was far less advanced than that in the river sediments collected from the general area of the dredged site (Ft. Edward site). Dechlorination in encapsulated sediments at the Moreau site appeared to have stopped soon after dredging. When microorganisms eluted from the encapsulated sediments were inoculated in clean sediments spiked with Aroclor 1242, an extensive dechlorination was observed, indicating that the encapsulated sediments still harbored dechlorinating microorganisms. However, the same inoculum failed to further dechlorinate residual congeners in the dredged sediments. On the other hand, an inoculum obtained in 1990 from the dredged site in the Hudson River dechlorinated the residual congeners further. In simulated dredged sediments, the maximum level of dechlorination was lower at reduced moisture contents. The population size of dechlorinating microorganisms, as determined by the most probable number (MPN) technique, was also smaller at the lower moisture levels. There was a significant correlation between the maximum extent of dechlorination and the specific death rate of dechlorinating populations. These results indicate that the underlying mechanism of the moisture-dependent maximum dechlorination is the moisture-dependence of the death rate of dechlorinating microorganisms.     

Comparison of leaching characteristics of heavy metals from bottom and fly ashes in Korea and Japan

The objective of this research was to compare the leaching characteristics of heavy metals such as cadmium, chromium, copper, nickel, lead, etc., in Korean and Japanese municipal solid waste incineration (MSWI) ash. The rate of leaching of heavy metal was measured by KSLT and JTL-13, and the amount of heavy metals leached was compared with the metal content in each waste component. Finally, bio-availability testing was performed to assess the risks associated with heavy metals leached from bottom ash and fly ash. From the results, the value of neutralization ability in Japanese fly ash was four times higher than that in Korean fly ash. The reason was the difference in the content of Ca(OH)(2) in fly ash. The amount of lead leached exceeded the regulatory level in both Japanese and Korean fly ash. The rate of leaching was relatively low in ash with a pH in the range of 6-10. The bio-availability test in fly ash demonstrated that the amount of heavy metals leached was Pb>Cd>Cr, but the order was changed to Pb>Cr>Cd in the bottom ash. The leaching concentration of lead exceeded the Japanese risk level in all fly ashes from the two countries, but the leaching concentration of cadmium exceeded the regulatory level in Korean fly ash only.     

Comprehensive analysis on mercury stream of cold cathode fluorescent lamps (CCFLs) in Korea (Republic of)

Journal of Material Cycles and Waste Management - Due to the activation of the Minamata Convention, policies and treatment facilities for the safe management of mercury and mercury compounds have...