Effect of combustion condition on cytotoxic and inflammatory activity of residential wood combustion particles

Residential heating is an important local source of fine particles and may cause significant exposure and health effects in populations. We investigated the cytotoxic and inflammatory activity of particulate emissions from normal (NC) and smouldering (SC) combustion in one masonry heater. The PM_1–0.2 and PM_0.2 samples were collected from the dilution tunnel with a high-volume cascade impactor (HVCI). Mouse RAW 264.7 macrophages were exposed to the PM-samples for 24 h. Inflammatory mediators, (IL-6, TNFα and MIP-2), and cytotoxicity (MTT-test), were measured. Furthermore, apoptosis and cell cycle of macrophages were analyzed. The HVCI particulate samples were characterized for ions, elements and PAH compounds. Assays of elemental and organic carbon were conducted from parallel low volume samples. All the samples displayed mostly dose-dependent inflammatory and cytotoxic activity. SC samples were more potent than NC samples at inducing cytotoxicity and MIP-2 production, while the order of potency was reversed in TNFα production. SC-PM_1–0.2 sample was a significantly more potent inducer of apoptosis than the respective NC sample. After adjustment for the relative toxicity with emission factor (mg MJ^?1), the SC-PM emissions had clearly higher inflammatory and cytotoxic potential than the NC-PM emissions. Thus, operational practice in batch burning of wood and the resultant combustion condition clearly affect the toxic potential of particulate emissions.     

Spatial scale affects community concordance among fishes, benthic macroinvertebrates, and bryophytes in streams.

Owing to the lack of information about the distribution patterns of many taxonomic groups, biodiversity conservation strategies commonly rely on a surrogate taxa approach for identifying areas of maximum conservation potential. Macroinvertebrates or fish are the most likely candidates for such a role in many freshwater systems. The usefulness of the surrogate taxa depends largely on community concordance, i.e., the degree of similarity in community patterns among taxonomic groups across a set of sites. We examined the effect of the spatial scale of a. study on the strength of community concordance among macroinvertebrates, bryophytes, and fish by comparing the concordance between ordinations of these groups in 101 boreal stream sites. We specifically asked if communities spanning several drainages are more concordant than those originating from a single drainage system. Our results indicate that community concordance is affected by spatial extent, being variable and generally weak at the scale of individual drainages, but strong across multiple drainage systems and ecoregions. We attribute this finding to different taxonomic groups responding to similar environmental factors and sharing a similar latitudinal gradient of community structure when viewed across large spatial scales. We also identified a "gradient of concordance," with sites contributing disproportionately to community concordance being in relatively large streams with high microhabitat variability. Overall, our results suggest that the degree of community concordance among freshwater organism groups depends critically on the spatial extent of the study, and surrogate groups at the scale of single river systems should be used with caution.     

Concentrations of heavy metals in fly ash from a coal-fired power plant with respect to the new Finnish limit values

In Finland, the new limit values for heavy metals in fertilizers used in agriculture and in forestry came into force in March 2007, and for materials used as earth construction agents, in June 2006. From the utilization point of view, it was notable that the total heavy metal concentrations (Cd, Cu, Pb, Cr, Mo, Zn, As, Ni, Ba, and Hg) in fly ash from a coal-fired power plant were lower than those limit values. The concentrations of the easily soluble elements Ca, Mg, Na, P, and Zn in the fly ash were between 3.5 and 35 times higher than those found in the coarse mineral soils of Finland. Fly ash is a potential agent for soil remediation and for improving soil fertility. If inorganic materials and by-products are utilized in earthworks, the content of harmful compounds must be low and the harmful components must be tightly bound to the matrix. Therefore, a five-stage sequential extraction procedure was used to evaluate the extractability of different elements in fly ash into the following fractions: (1) the water-soluble fraction, (2) the exchangeable fraction (CH₃COOH), (3) the easily reduced fraction (NH₂OH-HCl), (4) the oxidizable fraction (H₂O₂ + CH₃COONH₄), and (5) the residual fraction (HF + HNO₃ + HCl).     

The performance of state-of-the-art modelling techniques depends on geographical distribution of species

We explored the effects of prevalence, latitudinal range and clumping (spatial autocorrelation) of species distribution patterns on the predictive accuracy of eight state-of-the-art modelling techniques: Generalized Linear Models (GLMs), Generalized Boosting Method (GBM), Generalized Additive Models (GAMs), Classification Tree Analysis (CTA), Artificial Neural Network (ANN), Multivariate Adaptive Regression Splines (MARS), Mixture Discriminant Analysis (MDA) and Random Forest (RF). One hundred species of Lepidoptera, selected from the Distribution Atlas of European Butterflies, and three climate variables were used to determine the bioclimatic envelope for each butterfly species. The data set consisting of 2620 grid squares 30′ × 60′ in size all over Europe was randomly split into the calibration and the evaluation data sets. The performance of different models was assessed using the area under the curve (AUC) of a receiver operating characteristic (ROC) plot. Observed differences in modelling accuracy among species were then related to the geographical attributes of the species using GAM. The modelling performance was negatively related to the latitudinal range and prevalence, whereas the effect of spatial autocorrelation on prediction accuracy depended on the modelling technique. These three geographical attributes accounted for 19–61% of the variation in the modelling accuracy. Predictive accuracy of GAM, GLM and MDA was highly influenced by the three geographical attributes, whereas RF, ANN and GBM were moderately, and MARS and CTA only slightly affected. The contrasting effects of geographical distribution of species on predictive performance of different modelling techniques represent one source of uncertainty in species spatial distribution models. This should be taken into account in biogeographical modelling studies and assessments of climate change impacts.     

Chemical sequential extraction of heavy metals and sulphur in bottom ash and in fly ash from a pulp and paper mill complex

A five-stage sequential extraction procedure was used to determine the distribution of 11 metals (Cd, Cr, Cu, Mo, Pb, Zn, As, Co, V, Ni, Ba), and sulphur (S) in bottom ash and in fly ash from a fluidized bed co-combustion (i.e. wood and peat) boiler of Stora Enso Oyj Oulu Mill at Oulu, Northern Finland, into the following fractions: (1) water-soluble fraction (H2O); (2) exchangeable fraction (CH3COOH); (3) easily reduced fraction (NH2OH-HCl); (4) oxidizable fraction (H2O2 + CH3COONH4); and (5) residual fraction (HF + HNO3 + HCl). Although metals were extractable in all fractions, the highest concentrations of most of the metals occurred in the residual fraction. From the environmental point of view, this fraction is the non-mobile fraction and is potentially the least harmful. The Ca concentrations of 29.3 g kg(-1) (dry weight) in bottom ash and of 68.5 g kg(-1) (dry weight) in fly ash were correspondingly approximately 18 and 43 times higher than the average value of 1.6 g kg(-1) (dry weight) in arable land in Central Finland. The ashes were strongly alkaline pH (approximately 12) and had a liming effects of 9.3% (bottom ash) and 13% (fly ash) expressed as Ca equivalents (dry weight). The elevated Ca concentrations indicate that the ashes are potential agents for soil remediation and for improving soil fertility. The pH and liming effect values indicate that the ashes also have a pH buffering capacity. From the environmental point of view, it is notable that the heavy metal concentrations in both types of ash were lower than the Finnish criteria for ash utilization.     

PCDD/F and dioxin-like PCB profiles in soils amended with sewage sludge,compost, farmyard manure,and mineral fertilizer since 1962

Background, aim, and scope  

Biowaste contains compounds of agricultural value such as organic carbon, nutrients, and trace elements and can partially replace mineral fertilizer (MIN) and improve the physical properties of the soil. However, the obvious benefits of land spreading need to be carefully evaluated against potential adverse effects on the environment and human health. Environmental contamination resulting from biowaste application is one of the key variables when assessing cost/benefits. This study provides data on the resulting concentration of polychlorinated dibenzodioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in the soil column as a result of the different types of fertilizers.     

A case study of waste management at the Northern Finnish pulp and paper mill complex of Stora Enso Veitsiluoto Mills

This work presents the current waste management system at the pulp and paper mill complex of Stora Enso Oyj Veitsiluoto Mills at Kemi, Northern Finland. This paper covers examples of case studies carried out at the mill and describes how the wastes and by-products are utilized as a neutralizing agent for acidic wastewaters (i.e., green liquor dregs from the causticizing process), as a hardener in filling mine cavities (i.e., ash from the fluidized bed boiler), as a landscaping agent (i.e., ash as well as the fibre clay from chemical wastewater treatment plant), as a hydraulic barrier material for landfills (i.e., fibre clay), and as a soil enrichment agent (i.e., calcium carbonate from the precipitated calcium carbonate plant). In addition, the wood waste from the wood-handling plant, sawmill, packaging pallet plant and from the groundwood mill, as well as the biosludge from the biological wastewater treatment plant, are all incinerated in the fluidized bed boiler for energy production. Due to effective utilization of the solid wastes generated at the mills, the annual amount of waste to be disposed of in the landfill has decreased between 1994 and 2004 from 42,990 to 6083 tonn (expressed as wet weight). The paper also gives an overview of the relevant European Union legislation on the forest industry and on waste management, as well as of the pulping process and of the generation of major solid wastes in the pulp and paper mills.