Application of Poly(styrene-co-divinylbenzene) Macroporous Microparticles as a Catalyst Support in the Enzymatic Synthesis of Biodiesel

Macroporous poly(styrene-co-divinylbenzene) microparticles, with three different structural characteristics, have been synthesized and used as supports in the immobilization of lipase from Burkholderia cepacia. The best immobilization yield was found upon using microparticles with 35 % of divinylbenzene and the immobilized lipase on this type of particles was used as a catalyst to obtain biodiesel from soybean oil and ethanol. From the experimental results of the transesterification reaction, an empirical model quantitatively relating the temperature, the concentration of the enzyme and the transesterification yield was obtained. Statistical analysis of this model indicated that within the range of values of the variables studied (35–47 °C and 231–788 U/mg respectively) only the enzyme concentration exerted a significant influence on the reaction yield. Additionally, the good fit of a Michaelis–Menten-type model to the experimental results suggests that the limiting step of the reaction was the formation of the enzyme-substrate complex.     

Rapid and Low-Cost Method for Evaluation of Nutrient Release from Controlled-Release Fertilizers Using Electrical Conductivity

Methods to determine nutrient release rates of coated fertilizers usually rely on chemical analyses, which often are time-consuming and/or expensive. Our goal was to develop an innovative and rapid low-cost method to evaluate nutrient release from polymer coated MAP or urea using conductometry. The release in water is determined by measuring the electric conductivity (EC) over time, with intervals dependent on release rates. In the case of soluble salt fertilizers, EC can be immediately determined and converted to a concentration using a calibration curve. In the case of urea, an additional step is needed to convert the neutral urea into ammonium. The release rates in water were assessed for a range of commercial and laboratory-coated fertilizers. A validation test demonstrated strong agreement with the release determined using analytical techniques. The EC method hence offers an easy way to quickly evaluate the time course of release of nutrients from controlled-release fertilizers.     

Conductive-diamond electrochemical oxidation of chlorpyrifos in wastewater and identification of its main degradation products by LC-TOFMS

The electrochemical transformation of the organophosphorous insecticide chlorpyrifos (CPF) was investigated in wastewater. The oxidation of CPF was carried out in a single-compartment electrochemical flow cell working under batch operation mode, using diamond-based material as anode and stainless steel as cathode. In order to evaluate its persistence and degradation pathway, two different concentration levels (1.0 mg L⁻¹ and 0.1 mg L⁻¹) were studied. Liquid chromatography/mass spectrometry was used for evaluation of the initial and electrolyzed solutions. The identification of CPF transformation products was performed by liquid chromatography-time of flight-mass spectrometry (LC-TOFMS). Results showed that CPF is completely removed at the end of treatment time. Analysis by LC-TOFMS allowed the identification of six degradation products (with Mw 154, 170, 197, 305 321 and 333). Three of the identified intermediates (Mw 170, 305 and 321) were completely removed at the end of electrolysis time. Interestingly, the formation of diethyl 3,5,6-trichloropyridin-2yl phosphate (chlorpyrifos oxon) and 3,5,6-trichloropyridin-2-ol was also found in previous reported degradation pathways using different degradation technologies.     

Potential environmental influence of amino acids on the behavior of ZnO nanoparticles

The fate of nanomaterials when they enter the environment is an issue of increasing concern and thus it is important to know how they interact with natural organic molecules since this may have a significant impact on the particles' behavior. Because of our poor knowledge in this regard, the interaction of ZnO nanoparticles with amino acids of contrasting surface charge, including Histidine (HIS), Glycine (GLY), Aspartic acid (ASP) and Glutamic acid (GLU) which occur commonly in natural habitats, such as the plant root zone, was investigated over a range of pH conditions and concentrations. The addition of the individual amino acid led to significant changes in nanoparticle colloidal zeta potential stability, particle size distribution and the extent of agglomeration. Variations in pH resulted in considerable changes in nanoparticle surface charge and hydrodynamic size. In general, the particle size distribution decreased as the amino acid concentration increased, with more acidic conditions exacerbating this effect. In addition, increased concentrations of amino acids resulted in more stable nanoparticles in aqueous suspensions. Histidine had the greatest effect on colloidal stability, followed by Glycine, Aspartic acid and finally Glutamic acid. This study illustrates how nanoparticle behavior may change in the presence of naturally occurring amino acids, an important consideration when assessing the fate of nanoparticles in the environment. Additionally, utilization of amino acids in industrial processes could reduce particle agglomeration and it could lead to a way of employing more sustainable reagents.     

Suitability of oil bioremediation in an Artic soil using surplus heating from an incineration facility

A 168-day period field study, carried out in Sisimiut, Greenland, assessed the potential to enhance soil remediation with the surplus heating from an incineration facility. This approach searches a feasible ex situ remediation process that could be extended throughout the year with low costs. Individual and synergistic effects of biostimulation were also tested, in parallel. An interim evaluation at the end of the first 42 days showed that biostimulation and active heating, as separate treatments, enhanced petroleum hydrocarbon (PHC) removal compared to natural attenuation. The coupling of both technologies was even more effective, corroborating the benefits of both techniques in a remediation strategy. However, between day 42 and day 168, there was an opposite remediation trend with all treatments suggesting a stabilization except for natural attenuation, where PHC values continued to decrease. This enforces the “self-purification” capacity of the system, even at low temperatures. Coupling biostimulation with active heating was the best approach for PHC removal, namely for a short period of time (42 days). The proposed remediation scheme can be considered a reliable option for faster PHC removal with low maintenance and using “waste heating” from an incineration facility.     

Microbial fuel cell-induced production of fungal laccase to degrade the anthraquinone dye Remazol Brilliant Blue R

Environmental Chemistry Letters - The anthraquinone dye Remazol Brilliant Blue R is largely used in the textile industry. However, its removal from wastewaters is costly and complex. Many methods...     

Bat Diversity and Abundance as Indicators of Disturbance in Neotropical Rainforests

Abstract: Evaluating the degree of disturbance of any region to determine its relative importance for conservation purposes requires procedures that are relatively inexpensive and that yield accurate results fast. Because bats are abundant, diverse, and easy to sample, especially in the Neotropical rainforest, they fulfill several of the requirements of indicator species as identified in the literature. For 10 months we sampled bat communities in the Selva Lacandona in Chiapas, Mexico, at 15 sites representing five habitats. We also measured 10 variables representing vegetation structure and diversity at each site. With fuzzy-set techniques we produced a gradient classification of disturbance for the 15 sites based on the vegetation data. We explored the relationship between vegetation conditions, described as the membership degrees in the construct "fuzzy forest set" (the complementary fuzzy set of "disturbance"), and four bat community variables. Bat species richness, number of rare bat species, and the bat diversity index were positively correlated with the vegetation scores, and relative abundance of the most abundant bat species was negatively correlated with vegetation scores. A high number of phyllostomine species in a community is a good indicator of low levels of disturbance. Although a single indicator group will probably not be sufficient for decision-making processes in conservation, evaluating bat populations may be a good first step in assessing an area's conservation value, especially in rainforest regions.     

Study on the mechanical and environmental properties of concrete containing cathode ray tube glass aggregate

Cathode ray tube (CRT) glass is considered a hazardous material due to its lead toxicity. In addition, current disposal practices are being phased out due to their adverse environmental impacts. In this project, CRT glass was used as a fine aggregate replacement in concrete. Life-cycle material characterization was conducted by evaluating the durability and strength of the CRT-Concrete. Leaching tests were also conducted to investigate whether the material meets drinking water limits for Pb. Test results show that the plastic state of the CRT-Concrete was affected by the angularity of the glass particles. Moreover, the compressive strength of CRT-Concrete met and exceeded that of the control specimen. However, CRT-Concrete was susceptible to expansive alkali-silica reactions when more than 10% CRT replacement was used. Environmental leaching results show that lead concentrations from CRT-Concrete are below the drinking water limits depending on the CRT volume replacement and if biopolymers are used.     

Degradation of caffeine by conductive diamond electrochemical oxidation

The use of Conductive-Diamond Electrochemical Oxidation (CDEO) and Sonoelectrochemical Oxidation (CDSEO) has been evaluated for the removal of caffeine of wastewater. Effects of initial concentration, current density and supporting electrolyte on the process efficiency are assessed. Results show that caffeine is very efficiently removed with CDEO and that depletion of caffeine has two stages depending on its concentration. At low concentrations, opposite to what it is expected in a mass-transfer controlled process, the efficiency increases with current density very significantly, suggesting a very important role of mediated oxidation processes on the removal of caffeine. In addition, the removal of caffeine is faster than TOC, indicating the formation of reaction intermediates. The number and relative abundance of them depend on the operating conditions and supporting electrolyte used. In chloride media, removal of caffeine is faster and more efficiently, although the occurrence of more intermediates takes place. CDSEO does not increase the efficiency of caffeine removal, but it affects to the formation of intermediates. A detailed characterization of intermediates by liquid chromatography time-of-flight mass spectrometry seems to indicate that the degradation of caffeine by CDEO follows an oxidation pathway similar to mechanism proposed by other advanced oxidation processes.     

Catalytic combustion of soot over ceria-zinc mixed oxides catalysts supported onto cordierite

Modified substrates as outer heterogeneous catalysts was employed to reduce the soot generated from incomplete combustion of diesel or diesel/biodiesel blends, a process that harms the environment and public health. The unique storage properties of ceria(CeO2) makes it one of the most efficient catalysts available to date. Here, we proposed that ceria-based catalysts can lower the temperature at which soot combustion occurs; more specifically, from 610℃ to values included in the diesel exhausts operation range(300–450℃). The sol-gel method was used to synthesize mixed oxide-based catalysts(CeO2:ZnO); the resulting catalysts were deposited onto cordierite substrates. In addition, the morphological and structural properties of the material were evaluated by XRD, BET, TPR-H2, and SEM. Thermogravimetric(TG/DTA) analysis revealed that the presence of the catalyst decreased the soot combustion temperature by 200℃ on average, indicating that the oxygen species arise at low temperatures in this situation, promoting highly reactive oxidation reactions. Comparative analysis of soot emission by diffuse reflectance spectroscopy(DRS) showed that catalyst-impregnated cordierite samples efficiently oxidized soot in a diesel/biodiesel stationary motor: soot emission decreased by more than 70%.