Comparative lipid dynamics of euphausiids from the Antarctic and Northeast Pacific Oceans

To better understand the feeding and reproductive ecology of euphausiids (krill) in different ocean environments, lipid classes and individual lipid components of four different species of euphausiids from Northeast Pacific (temperate species) and Southern Ocean (Antarctic species) were analyzed in animals from multiple life stages and seasons. The dominant krill species in the Northeast Pacific Euphausia pacifica and Thysanoessa spinifera, were compared to the two major Antarctic species, Euphausia superba and E. crystallorophias. Analysis comprised total lipid and lipid classes together with individual fatty acid and sterol composition in adults, juveniles, and larvae. Antarctic krill had much higher lipid content than their temperate relatives (10–50 and 5–20% of dry mass for Antarctic and temperate species, respectively) with significant seasonal variations observed. Phospholipids were the dominant lipid class in both temperate krill species, while neutral storage lipids (wax esters and triacylglycerols for E. crystallorophias and E. superba, respectively) were the major lipid class in Antarctic krill and accounted for up to 40% of the total lipid content. Important fatty acids, specifically 16:0, 18:1ω9, 20:5ω3, and 22:6ω3, were detected in all four krill species, with minor differences between species and seasons. Detailed lipid profiles suggest that krill alter their lipid composition with life stage and season. In particular, larval Antarctic krill appear to utilize alternate food resources (i.e., sea-ice associated organisms) during austral winter in contrast to juveniles and adults (i.e., seston and copepods). Lipid dynamics in krill among krill in both systems appear closely linked to their life cycle and environmental conditions including food availability, and can provide a more complete comparative ecology of euphausiids in these environmentally distinct systems.     

Modeling of road traffic noise and estimated human exposure in Fulton County, Georgia, USA

Environmental noise is a major source of public complaints. Noise in the community causes physical and socio-economic effects and has been shown to be related to adverse health impacts. Noise, however, has not been actively researched in the United States compared with the European Union countries in recent years. In this research, we aimed at modeling road traffic noise and analyzing human exposure in Fulton County, Georgia, United States. We modeled road traffic noise levels using the United States Department of Transportation Federal Highway Administration Traffic Noise Model implemented in SoundPLAN?. After analyzing noise levels with raster, vector and fa?ade maps, we estimated human exposure to high noise levels. Accurate digital elevation models and building heights were derived from Light Detection And Ranging survey datasets and building footprint boundaries. Traffic datasets were collected from the Georgia Department of Transportation and the Atlanta Regional Commission. Noise level simulation was performed with 62 computers in a distributed computing environment. Finally, the noise-exposed population was calculated using geographic information system techniques. Results show that 48% of the total county population [N=870,166 residents] is potentially exposed to 55 dB(A) or higher noise levels during daytime. About 9% of the population is potentially exposed to 67 dB(A) or higher noises. At nighttime, 32% of the population is expected to be exposed to noise levels higher than 50 dB(A). This research shows that large-scale traffic noise estimation is possible with the help of various organizations. We believe that this research is a significant stepping stone for analyzing community health associated with noise exposures in the United States.     

Compositional effects on the dynamic properties of municipal solid waste

Large-scale cyclic simple shear tests were conducted on reconstituted specimens of municipal solid waste (MSW) collected from the Tri-Cities landfill in Fremont, California, USA. The influence of waste composition and compacted unit weight on the shear wave velocity, small-strain shear modulus, and strain-dependent shear modulus reduction and damping ratio curves of MSW was investigated in these tests. Modulus reduction and damping ratio curves were evaluated over a strain range of 0.01-3%. Specimens were reconstituted using 100%, 65%, and 35%, by weight, of the material that passed through a 20mm screen and four different levels of compaction effort. All specimens were consolidated under a normal stress of 75 kPa prior to testing. The test results show a very strong dependence of shear wave velocity and small strain shear modulus on unit weight. Unit weight also had an influence on modulus reduction and damping ratio. Waste composition had a very strong influence on damping and also influenced shear wave velocity, small strain shear modulus, and modulus reduction. The interrelationship between unit weight and waste composition made it difficult to separate out the effects of these parameters.     

Chemical characteristics of long-range transport aerosol at background sites in Korea

In this study, background concentration sites of Deokjeok and Gosan, which were deemed suitable for monitoring the impact of long-range transported air pollutants, were selected. An investigation of the source types of pollutants, their locations, and relative quantitative contributions to the particulate concentrations at both sites using appropriate methodologies to make initial estimations was conducted. Episodic measurements of PM_2.5, PM₁₀, and size distribution, along with its ion and carbon components were performed from 2005 to 2007, and a comprehensive analysis of the results was conducted utilizing back trajectory analysis. As for frequency of wind direction, it was quite apparent that the two sites are heavily influenced by air masses originating from the eastern and northern regions of China. For PM_2.5 and PM₁₀, the mass concentrations from north and east China were higher than other cases, originating from the ocean. In the northerly-wind case, meteorological properties for Deokjeok and Gosan and the influence of carbon emissions from northwest Korea resulted in a changing of air mass properties during transport. As was the case with mass concentration, the highest contribution for ionic and carbon components of PM_2.5 and PM₁₀ for both sites appeared for the westerly wind case. A specially high relative contribution, greater than 1.4 times, was apparent in the secondary aerosol case because of a large influence of long-range transported pollutants from east China. Carbon components exhibited different behaviors for the northerly and westerly wind cases compared with secondary aerosol. The major reason for this discrepancy appears to be the carbon emissions from northwest Korea.     

Effect of chronic exposure to acetaminophen and lincomycin on Japanese medaka (Oryzias latipes) and freshwater cladocerans Daphnia magna and Moina macrocopa, and potential mechanisms of endocrine disruption

Chronic toxicity of acetaminophen and lincomycin were evaluated using freshwater organisms including two crustaceans (Daphnia magna and Moina macrocopa) and a fish (Oryzias latipes). H295R, a human adrenal cell was also used to understand the effects on steroidogenesis. In 21 d D. magna exposure, survival NOEC was found at 5.72 mg L⁻¹ and no reproduction related effects were noted at this level of exposure to acetaminophen, while 21 d survival or growth effects were not observed even at the highest exposure levels (153 mg L⁻¹) for lincomycin. In the chronic fish toxicity test, significant reduction in juvenile survival was observed at 30 d post-hatch (dph) at 95 mg L⁻¹ of acetaminophen, and 0.42 mg L⁻¹ of lincomycin. After the exposure to both pharmaceuticals, vitellogenin levels tended to increase in male fish at 90 dph. In the eggs which were prenatally exposed to 9.5 mg L⁻¹ of acetaminophen, reduced hatchability was observed. The results of H295R cell assay showed that both pharmaceuticals could alter steroidogenic pathway and increase estrogenicity. Endocrine disruption potentials and their ecological implication may deserve further studies. Our observations suggest however that ecological risks of both pharmaceuticals are negligible at the concentrations currently found in the environment.     

Optimization of two-step catalyzed biodiesel production from soybean waste cooking oil

An acid–base-catalyst-based two-step biodiesel production experiment from soybean waste cooking oil was carried out to identify which parameter is the most influential among the experimental parameters by using the Taguchi method. Heterogeneous catalysts were used to avoid a water-consuming homogeneous catalyst removal process. Ferric sulfate and calcium oxide were used as acid and base catalysts, respectively, for the heterogeneous reaction. Reaction time and methanol-to-triglyceride mole ratio were significant factors. The optimum parameters for step 1 (acid esterification) were 4 h of reaction time, 4 wt. % of ferric sulfate amount, a 16:1 methanol to triglyceride mole ratio, and 400 rpm of mixing speed, respectively. For the transesterification step, the most influential factor was reaction time, and CaO amount was significant as well. On the other hand, the mole ratio of methanol and oil was relatively less significant. Optimum parameters were 3 h of reaction time, 2 wt. % of CaO, and a 12:1 methanol to triglyceride mole ratio with mixing speed at 400 rpm in this experimental range. Under the optimum conditions, waste cooking oil with 5.27 mg KOH/g of acid value was converted into crude biodiesel by a two-step process with fatty acid methyl ester content reaching 89.8 % without any further post-purification.     

Gene expression analysis and classification of mode of toxicity of polycyclic aromatic hydrocarbons (PAHs) in Escherichia coli

Escherichia coli is known to respond to certain toxic chemicals through an increased expression of various stress genes. In this study, therefore, the expression of recA, katG, fabA and grpE genes was used as a representative for DNA, oxidative, membrane and protein damage, respectively, after E. coli was exposed to different polycyclic aromatic hydrocarbons (PAHs), i.e., phenanthrene, naphthalene and benzo[a]pyrene. To accomplish this, the expression levels of these four genes were quantified using a real-time RT-PCR analysis when E. coli cultures were under stressful conditions, such as those caused by an exposure to mitomycin C, hydrogen peroxide and phenol. It was found that the primary toxic effect of each chemical is clearly seen when the expression levels of the different genes are compared. Tests with the PAHs showed naphthalene and benzo[a]pyrene to be genotoxic, while phenanthrene had no clear effect on the expression of any of these genes. Based on these results, the effects due to these toxic chemicals and the extent of each stress can be evaluated with ease using the expression levels of different stress responsive genes.     

Distribution of dioxins, furans, and dioxin-like PCBs in solid products generated by pyrolysis and melting of automobile shredder residues

Polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls (PCBs) in char and slag produced from automobile shredder residue by pyrolysis and melting process were analyzed to measure changes in the characteristics and distribution of their congeners caused by thermal treatment. In particular, a large quantity of dioxin-like PCBs occurred in low-chlorinated congeners. The concentration of PCDDs/PCDFs in char was 0.542 microg/kg, with mostly PCDFs dominant and its toxicity equivalent concentration (TEQ) was about 70ngTEQ/kg. The concentration and toxicity equivalent concentration of dioxin-like PCBs in char were 0.869 microg/kg and 1.60ngTEQ/kg, respectively. Melted char slag was produced using various cooling methods: water quenching, air cooling, and slow cooling. The concentrations of PCDDs/PCDFs in slag produced by the methods were 1.51, 1.38, and 2.43ngTEQ/kg, respectively; those of dioxin-like PCBs were close to 0.01ngTEQ/kg. The congener distributions varied only slightly among the cooling methods. Applying melting procedure to char reduced PCDD/PCDF concentration by 95.3%, and the corresponding TEQ concentration was reduced by 97.9%. We thus conclude that melting process is an efficient way to reduce the concentrations of PCDDs/PCDFs in solids produced by pyrolysis.     

Emissions of polychlorinated biphenyls (PCBs) from sludge drying beds to the atmosphere in Chicago

Ambient air PCB concentrations in the Lake Calumet region in Southeast Chicago have been found to be significantly higher than in nearby non-urban areas. This area is highly industrialized and also contains municipal sludge drying facilities and landfills. In an effort to quantify the importance of the sludge drying facilities to the elevated concentrations, upwind/downwind air samples from the Calumet East sludge drying bed were obtained between April and October 2002. For these samples, the downwind minus upwind (downwind-upwind) concentration varied from 0.33 to 1.27ngm(-3) for non-northeast (NE) direction winds suggesting sludge drying is a source of PCBs to the atmosphere. However, the upwind concentrations were higher than the downwind for winds from the NE of the sampling site suggesting more significant source(s), possibly Lake Calumet or the so called "Cluster site" NE of the sludge drying beds. Flux chamber experiments carried out during the sampling period measured average PCB fluxes of 210ngm(-2)h(-1) (range 43-910ngm(-2)h(-1)) which resulted in an overall flux of 0.005kgday (d)(-1) ( approximately 2kgyr(-1)). A developed regression equation between moisture content and sludge concentration estimated higher PCB losses of 0.26kgd(-1) ( approximately 95kgyr(-1)). Although these two approaches yielded different values, they both indicate that the emission from the Calumet East sludge drying beds were of minimal importance when compared to the total estimated amount of 2-70kgd(-1) (700-2100kgyr(-1)) of PCBs entering the Chicago atmosphere.