Environmental and production consequences of using alum-amended poultry litter as a nutrient source for corn

Field trials were established to compare alum-treated poultry litter (ATPL), normal poultry litter (NPL), and triple superphosphate (TSP) as fertilizer sources for corn (Zea mays L.) when applied at rates based on current litter management strategies in Virginia. Trials were established in the Costal Plain and Piedmont physiographic regions near Painter and Orange, VA, respectively. Nitrogen-based applications of ATPL or NPL applied at rates estimated to supply 173 kg of plant-available nitrogen (PAN) ha(-1) resulted in significantly lower grain yields than treatments receiving commercial fertilizer at the same rate in 2000 and 2001 at Painter. These decreases in grain yield at the N-based application rates were attributed to inadequate N availability, resulting from overestimates of PAN as demonstrated by tissue N concentrations. However, at Orange no treatment effects on grain yield were observed. Applications of ATPL did not affect Al concentrations in corn ear-leaves at either location. Exchangeable soil Al concentrations were most elevated in treatments receiving only NH4NO3 as an N source. At N-based application rates, the ATPL resulted in lower Mehlich 1-extractable P (M1-P) and water-extractable soil phosphorus (H2O-P) concentrations compared to the application of NPL. A portion of this reduction could be attributed to lower rates of P applied in the N-based ATPL treatments. Runoff collected from treatments which received ATPL 2 d before conducting rainfall simulations contained 61 to 71% less dissolved reactive phosphorus (DRP) than treatments receiving NPL. These results show that ATPL may be used as a nutrient source for corn production without significant management alterations. Alum-treated poultry litter can also reduce the environmental impact of litter applications, primarily through minimizing the P status of soils receiving long-term applications of litter and reductions in runoff DRP losses shortly after application.     

Preparing future engineers for challenges of the 21st century: Sustainable engineering

The field of engineering is changing rapidly as the growing global population puts added demands on the earth's resources: engineering decisions must now account for limitations in materials and energy as well as the need to reduce discharges of wastes. This means educators must revise courses and curricula so engineering graduates are prepared for the new challenges as practicing engineers. The Center for Sustainable Engineering has been established to help faculty members accommodate such changes through workshops and new educational materials, including a free access website with peer-reviewed materials.     

Comparisons of elements and inorganic compounds inside and outside of residences

The results of more than 1 yr of air monitoring inside and outside of five homes in each of two communities are presented for SO₂, NO₂, mass respirable particles, SO₄, Al, Br, Cl, Mn, Na, and V. Outdoor measurements across the home site in each city are consistent with proximity to outdoor sources. Looking across indoor residential sites in each city, the home appears to alter outdoor concentrations in several ways. Indoor level of SO₂, SO₄, Mn, and V are lower than those measured outdoors. These constituents are thought generally to result from outdoor sources. The other constituents studied are at times found in excess within homes. In some cases the source or sources of excess concentration of a particular constituent could be identified; often, however, the source of excess indoor concentration could not be identified.     

Efficiency of energy delivery systems: II. Estimating energy costs of capital equipment

Procedures are developed and summarized that allow the calculation of the energy required to manufacture and install capital equipment, such as the material needed for a coalfired power plant. Three methods are available, each with certain strengths and weaknessess The first uses both literature value and national manufacturing statistics, the second uses a previously developed technique that disaggregates energy use according to how much each industry buys from all other industries, and the third technique is based on the average national relation between energy use and dollar flow. The most important differences between estimates of energy use by the different techniques relates to the inclusion or exclusion of labor and indirect expenditures rather than to differences in the data bases of the three techniques.     

Geochemical partitioning of copper, lead, and zinc in benthic, estuarine sediment profiles

The geochemical partitioning of copper (Cu), lead (Pb), and zinc (Zn) was examined in benthic sediment profiles (0- to 20-cm depth interval) composed of relatively coarse (65-90% sand-sized particles), noncohesive, suboxic material (Eh +120 to +260 mV). Total Cu, Pb, and Zn concentrations ranged from 8.3 to 194, 16.3 to 74.8, and 30.1 to 220 mg/kg, respectively, and were related to vertical trends in sediment texture. The observed distribution coefficients describing solid-solution partitioning were in the range of 100 to 1000 L/kg. The geochemical partitioning of solid-phase Cu, Pb, and Zn between six operationally defined fractions was examined with a sequential extraction scheme. The association of Cu, Pb, and Zn with amorphous oxides, crystalline oxides, and organic matter was linearly dependent on the abundance of each respective phase. For retention by amorphous oxide minerals, the observed stoichiometry ranged from 5.2 to 23.7 mg/g for Cu, 12.8 to 21.5 mg/g for Pb, and 23.1 to 85.7 mg/g for Zn. Corresponding values for association with crystalline oxides were an order of magnitude less than those for amorphous oxides, indicating a lesser affinity of trace metals for crystalline oxides. The stoichiometric relationships describing association with organic matter ranged from 17.6 to 54.0 mg/g for Cu, 6.1 to 9.6 mg/g for Pb, and 6.4 to 16.4 mg/g for Zn. The results from this study provide an insight into processes controlling trace metal partitioning in coarse-textured, suboxic, estuarine sediments.     

Adsorption of crude oil on arctic terrain

Arctic terrain was divided into three layers, moss, detritus and clay, and each layer was contacted with Norman Wells crude oil. Chromatographic analysis of the crude oil extracts of the terrain layers showed that the adsorption capacity of the terrain increased with increasing organic content. The higher molecular weight n-alkanes were adsorbed to a greater extent than lower n-alkanes on the moss and detritus layers. Of the aromatics, p-xylene was adsorbed to a greater extent than benzene on all three layers of the terrain. Retention of crude oil components on Arctic terrain in the event of an oil spill would be in accord with these findings.     

Tributyltin partitioning in sediments: effect of aging

The effect of aging on the solid/pore-water partitioning and desorption behaviour of tributyltin (TBT) in sediments was examined. Three sediment samples with contrasting physical and chemical properties were spiked with 10 mg/kg TBT and aged under sterile conditions for periods of time ranging from 1 to 84 days. Aging had a negligible effect on partitioning and desorption behaviour in a sandy sample with very low organic carbon content (0.2% w/w). In contrast, for samples with larger amounts of organic carbon (2.6% and 4.8% w/w), aging caused substantial increases in TBT sorption. For these samples, apparent distribution coefficients (KD,app) obtained from sequential 2 h desorption experiments also exhibited a twofold increase between spiked sediments subjected to aging for 1 day and 84 days. This study demonstrates that aging effects may be an important aspect of TBT fate in contaminated sediments.     

Thermal modeling,characterization, and enviro-economic investigations on inclined felt sheet solar distiller for seawater desalination

Environmental Science and Pollution Research - Sustainable desalination can be achieved by adopting renewable energy-based low-cost and low-impact desalting techniques. In this investigation,...     

Effect of Common Chemical Treatments on the Process Kinetics and Mechanical Properties of Flax/Epoxy Composites Manufactured by Resin Infusion

Chemical treatments are widely employed to improve the fiber-matrix adhesion in composites based on eco-friendly fibers such as flax. To better understand the influence of these treatments on processing behavior, this study characterized the surface chemistry and morphology of woven flax fabrics treated by acetone, alkaline, silane and diluted epoxy. Flax/epoxy composites were then manufactured by resin infusion and the flow front and preform thickness evolution was monitored. The alkaline treatment was shown to result in a 50 % increase in equivalent permeability due to an increase in porosity which led to a decrease in flexural properties. The processing results were found to be in good agreement with predictions of a 1-dimensional model. This study suggests that infusion times are not considerably affected by the observed changes in surface energy. However, other implications of the treatments such as an increase in fibrillation can alter the infusion times significantly.