An estimate of the conversion rates of SO2 to SO2-4 and NO2 to HNO3+ NO3- for the evaluation air pollution in Beijing

The conversion rates of SO₂ to SO^2-₄ and NO₂ to HNO₃₊NO₃- are estimated from the field-data obtained in Beijing in summer, 1988. The results show that the conversion rate of NO₂ is about four times as much as that of SO₂; The conversion rates have a diurnal variation in a day. On the average, the rate of SO₂ is estimated to be 4.7% h^-1 during the daytime and 3.4% h^-1 during the nighttime. Similarly, the rate of NO₂ is estimated to be 17.2% h^-1 and 12% h^-1 respectively.     

Changes in microcystin content and environmental parameters over the course of a toxic cyanobacteria bloom in a hypertrophic regulated river, South Korea

Cyanobacterial blooms and associated microcystins in hypertrophic stagnant West-Nakdong River were investigated at weekly intervals from April to August, 1999. Microcystis spp. accounted for over 85% of the numeric abundance of total phytoplankton. Microcystins were present in the blooms sampled between May and August. The peak of total microcystin (microcystin-LR + -RR) levels (maximum level; 612 microg g(-1)) was detected in the initial stage of the bloom (mid May), at the same time as high N/P ratio and high Microcystis biomass. This study indicated that total microcystins of this regulated river was positively correlated to Microcystis biomass, absolute nutrient concentration and TN/TP ratio.     

Degradation characteristics of toluene,benzene, ethylbenzene,and xylene by Stenotrophomonas maltophilia T3-c

Stenotrophomonas maltophilia T3-c, isolated from a biofilter for the removal of benzene, toluene, ethylbenzene, and xylene (BTEX), could grow in a mineral salt medium containing toluene, benzene, or ethylbenzene as the sole source of carbon. The effect of environmental factors such as initial toluene mass, medium pH, and temperature on the degradation rate of toluene was investigated. The cosubstrate interactions in the BTEX mixture by the isolate were also studied. Within the range of initial toluene mass (from 23 to 70 pmol), an increased substrate concentration increased the specific degradation of toluene by S. maltophilia T3-c. The toluene degradation activity of S. maltophilia T3-c could be maintained at a broad pH range from 5 to 8. The rates at 20 and 40 degrees C were 43 and 83%, respectively, of the rate at 30 degrees C. The specific degradation rates of toluene, benzene, and ethylbenzene by strain T3-c were 2.38, 4.25, and 2.06 micromol/g-DCW/hr. While xylene could not be utilized as a growth substrate by S. maltophilia T3-c, the presence of toluene resulted in the cometabolic degradation of xylene. The specific degradation rate of toluene was increased by the presence of benzene, ethylbenzene, or xylene in binary mixtures. The presence of toluene or xylene in binary mixtures with benzene increased the specific degradation rate of benzene. The presence of ethylbenzene in binary mixtures with benzene inhibited benzene degradation. The presence of more than three kinds of substrates inhibited the specific degradation rate of benzene. All BTEX mixtures, except tri-mixtures of benzene, ethylbenzene, and xylene or mixtures of all four substrates, had little effect on the degradation of ethylbenzene by S. maltophilia T3-c. The utilization preference of the substrates by S. maltophilia T3-c was as follows: ethylbenzene was degraded fastest, followed by toluene and benzene. However, the specific degradation rates of substrates, in order, were benzene, toluene, and ethylbenzene.     

Combined simulation of combustion and gas flow in a grate-type incinerator

Computational fluid dynamic (CFD) analysis of the thermal flow in the combustion chamber of a solid waste incinerator provides crucial insight into the incinerator's performance. However, the interrelation of the gas flow with the burning waste has not been adequately treated in many CFD models. A strategy for a combined simulation of the waste combustion and the gas flow in the furnace is introduced here. When coupled with CFD, a model of the waste combustion in the bed provides the inlet conditions for the gas flow field and receives the radiative heat flux onto the bed from the furnace wall and gaseous species. An unsteady one-dimensional bed model was used for the test simulation, in which the moving bed was treated as a packed bed of homogeneous fuel particles. The simulation results show the physical processes of the waste combustion and its interaction with the gas flow for various operational parameters.     

Behaviors of intercellular materials and nutrients in biological nutrient removal process supplied with domestic wastewater and food waste.

A four-stage biological nutrient removal (BNR) process was operated to investigate the effect of anaerobically fermented leachate of food waste (AFLFW) as an external carbon source on nutrient removal from domestic wastewater having a low carbon-to-nitrogen ratio. The BNR system that was supplemented with AFLFW showed a good performance at a sludge retention time (SRT) of 30 days, despite low temperature. With this wastewater, average removal efficiencies of soluble chemical oxygen demand (COD), total nitrogen (T-N), and total phosphorus (T-P) were 88 to 93%, 70 to 74%, and 63 to 68%, respectively. In this study, several kinds of poly-hydroxyalkanoates (PHAs) were observed in cells. These included 24% poly-3-hydroxybutyrate (PHB), 41% poly-3-hydroxyvalerate (PHV), 18% poly-3-hydroxyhexanoate (PHH), 10% poly-3-hydroxyoctanoate (PHO), 5% poly-3-hydroxydecanoate (PHD). and 2% poly-3-hydroxydodecanoate (PHDD), indicating that microorganisms could store various PHAs through the different metabolic pathways. However, breakdown of the enhanced biological phosphorus removal (EBPR) mechanism was observed when SRT increased from 30 to 50 days for the enhancement of nitrification. To study the effect of SRT on EBPR, a sequencing batch reactor (SBR) system that was supplied with glucose was operated at various SRTs of 5, 10, and 15 days. Nitrification and denitrification efficiencies increased as SRT increased. However, the content of intracellular materials such as PHAs, glycogen. and poly-P in cells decreased. From these results, it was concluded that SRT should be carefully controlled to increase nitrification activity and to maintain biological phosphorus removal activity in the BNR process.     

Minimum effective release rate of antifoulants.1. Effects of zosteric acid at Ford Island,Hawaii (USA)

Minimum effective release rate (MERR) of zosteric acid (ZA) was studied at Ford Island. At laboratory condition, spore attachment in Enteromorpha intestinalis was inhibited significantly at 28.2 microg cm2 of ZA. More than 95% reduction in spore attachment was achieved in Ulva fasciata at 2,000 microM of ZA through membrane diffusion system. At 40 cm depth level larval settlement was high with maximum number of Hydroides elegans settlement. The overall larval settlement was increased with increasing days of exposure. The MERR of 10 microg cm(-2) d(-1) ZA inhibited 50% of the larval settlement. However, the inhibition rate was not proportionate to the antifouling ZA concentration. Using MERR membrane diffusion system an effective antifouling strategy was suggested for Ford Island.     

Experimental and numerical calculations of waste R-134a thermal decomposition for energy and fluorine material recovery

Considering the global warming potential of R-134a (C₂H₂F₄) with the substantial generation of this refrigerant as waste material in various industrial sectors, the development of proper thermal destruction method of R-134a is of great practical significance. For this, experiment and numerical calculations have initially made for a tubular-type furnace in order to figure out the basic combustion characteristics of R-134a. A series of experimental investigations for the thermal decomposition of R-134a have been made as a function of wall temperature of tubular furnace and important reacting species such as O₂ and H₂O necessary for the decomposition of C₂H₂F₄ into HF, CO₂ and H₂O. In general, the thermal decomposition of R-134a is successfully made for the condition of temperature above 800 °C with the supply of stoichiometric amount of O₂ and these results are well agreed with numerical prediction. And this information is employed for the simulation of a full-scale, practical incinerator used for the CDM project. For this, numerical investigation has been made for a commercial-scale incinerator using CH₄–air flames for the proper destruction C₂H₂F₄ together with the control of pollutants such as CO and NO. In general, the destruction rate of C₂H₂F₄ appears more than 99.99 % and the generation of CO and NO species appears rather sensitive to the operational condition such as amount of water vapor. The numerical method of HFCs (hydrofluorocarbons) thermal treatment shows high possibility as a viable tool for the proper design and optimal determination of the operational condition for a HFCs incinerator.     

Rating the Aggressivity of Australian Passenger Vehicles Towards Other Vehicle Occupants and Unprotected Road Users

Two measures of aggressivity of Australian passenger vehicles have been developed. The first measures the aggressivity to occupants of other cars. This type of aggressivity rating is based on two-car crashes between passenger vehicles and measures the injury risk each make/model in the collisions poses to the drivers of the other vehicles. The second measures aggressivity to unprotected road users. These aggressivity ratings reflect the threat of severe injury to pedestrians, bicyclists and motorcyclists by die make/model of vehicle colliding with them. This analysis was based on nearly 102,000 drivers involved in tow-away crashes with the makes/models which were the focus of the study and on nearly 22,000 injured pedestrians, bicyclists, and motorcyclists. The results suggest that crasbworthiness and aggressivity are two different aspects of a vehicle's safety performance, with good performance on one dimension not necessarily being associated with good performance on the other.     

Hybridization of the natural antibiotic, cinnamic acid, with layered double hydroxides (LDH) as green pesticide

Background, aim, and scope  

Heavy application of highly toxic synthetic pesticides has been committed to protect crops against insects and diseases, which have brought about serious environmental problems. Thus, an inevitable and fundamental issue has been how to protect crops without harmful effects on nature. As a fascinating nature-compatible approach, we have attempted to hybridize soil-compatible layered double hydroxides (LDHs) with natural antibiotic substances. Only a few of natural antibiotic substances are available for pest control mainly because of their inherent properties such as easy degradability, high minimum inhibition concentration for practical application, and often extremely low availability, whereas LDHs exhibit unique properties such as anion exchange capacity, acid lability, and high affinity to ubiquitous carbonate ion which make them an excellent inorganic matrix to carry labile biomolecules in soils. This study focuses on the behavior of cinnamate–LDH hybrid in soils and the evaluation of its potentials as a green pesticide.     

Optical and microphysical properties of severe haze and smoke aerosol measured by integrated remote sensing techniques in Gwangju,Korea

Aerosol optical and microphysical parameters from severe haze events observed in October 2005 at Gwangju, Korea (35.10°N, 126.53°E) were determined from the ground using a multi-wavelength Raman lidar, a sunphotometer, and a real-time carbon particle analyzer and from space using satellite retrievals. Two different aerosol types were identified based on the variability of optical characteristics for different air mass conditions. Retrievals of microphysical properties of the haze from the Raman lidar indicated distinct light-absorbing characteristics for different haze aerosols originating from eastern and northern China (haze) and eastern Siberia (forest-fire smoke). The haze transported from the west showed moderately higher absorbing characteristics (SSA = 0.90 ± 0.03, 532 nm) than from the northern direction (SSA = 0.96 ± 0.02). The organic/elemental carbon (OC/EC) ratio varied between 2.5 ± 0.4 and 4.1 ± 0.7.