Adsorption and precipitation of tetracycline with struvite.

The interaction of tetracycline with struvite during adsorption and precipitation processes was investigated. Tetracycline removal by adsorption was affected by solution pH, contact time, and struvite concentration. The lowest tetracycline removal (8.4%) was observed at pH 7.7, the dissociation constant (pKa2) of tetracycline. Because of the electrostatic repulsion, the amount of tetracycline adsorbed on the surface was low. The small amount of adsorption was the result of surface complexation between tetracycline ions and metal ions. Calcium (Ca2+) ions in the adsorbent enhanced the binding of tetracycline. Freundlich (KF: 0.04, n: 1.49) and Redlich-Peterson (KR: 0.08, alphaR: 0.98, betaR: 0.49) models best defined the equilibrium data. In the case of struvite precipitation, approximately 22% of tetracycline was removed as a result of binding to struvite alongside struvite formation.     

Accumulation trends of metals and a metalloid in the freshwater crayfish Astacus leptodactylus from Lake Yeniçağa (Turkey)

This study aims to determine the extent of metal pollution in Lake Yeniça?a (Bolu, Turkey) by investigating the accumulation trends of five metals (Al, Cu, Fe, Ni and Zn) and a metalloid (As) in gills, exoskeleton, hepatopancreas and abdominal muscles of the freshwater crayfish Astacus leptodactylus. Principal component analysis (PCA), cluster analysis (CA), correlation analysis and analysis of variance (ANOVA) were utilised to determine the accumulation profiles of each element over four seasons. The greatest element accumulation was found to occur in the gills. All elements in exoskeletal tissue displayed positive correlations with each other, a similar trend was also observed in the hepatopancreas samples. Strong (r=0.868) and very strong (r=0.960) positive correlations were found between the accumulations of Al and Fe in gills and the exoskeleton, respectively. Correlations in tissue accumulation rates are discussed in the context of metabolic roles and impacts associated with the elements tested. Elemental compositions of Yeniça?a water and sediment samples were also investigated to determine whether the composition of the surrounding environment matches the metal accumulation trends of tissue samples. We demonstrate that, by the criteria set by the United States Environmental Protection Agency, Lake Yeniça?a is heavily polluted in terms of As and Ni.     

Determination of commonly used herbicides in surface water using solid-phase extraction and dual-column HPLC-DAD

The present study describes the application of different solid-phase extraction techniques for the extraction, separation, and quantitative determination of 10 commonly used herbicides with different chemical structures (chlorsulfuron, diuron, bentazone, linuron, chlorpropham, fenoxoprop-ethyl, MCPA, diclofop-methyl, fluazifop-butyl, trifluraline) in water. Octadecyl (C(18)) Empore extraction disks, octadecyl (C(18)), and stryene divinylbenzene (SDB) Bond Elut Env cartridges were compared for solid-phase extraction efficiency. Herbicides were separated and quantified by reversed-phase high performance liquid chromatography with diode-array detection (HPLC-DAD) with simultaneous separation on two columns of differing polarity (C(18) and CN) to confirm identification. Analytical separation was performed simultaneously on C(18) and CN columns. Reanalysis of the sample extracts on a (cyano) CN column were used to confirm the identity of these compounds. Method optimization and validation parameters were presented in this work. Recoveries varied from 76.0% to 99.0% for C(18) disks, from 75.1% to 100.0% for C(18) cartridges, and from 54.0% to 98.0% for SDB cartridges over concentrations at 0.025--0.4 microg L(-1). The limits of detection were 0.012--0.035 microg L(-1).     

Physico-chemical treatment of marble processing wastewater and the recycling of its sludge.

In the first part of this study, the treatability of marble processing wastewater by the coagulation-flocculation process was investigated. Optimum coagulant-flocculant doses for turbidity removal in wastewater from the cutting, faience and equalization processes were determined as 500, 200 and 500 ppm of Al2(SO4)3; 300, 500 and 300 ppm of FeCl3 and 600, 400 and 200 ppm of Agrofloc 100 (AGRON Water Treatment Technologies and Chemical Marketing Industry and Trade Limited Company, Izmir, Turkey), respectively. It was found that the removal of total solids from cutting and equalization process wastewaters was highest for the 100 ppm dosage of all chemicals used. The amount of total solids removed from faience process wastewater by Agrofloc 100 was higher than that removed by the other chemicals used. The removals of suspended solids from cutting, faience and equalization process wastewaters were similar to each other for each of the chemicals. The pH values after treatment by Agrofloc 100 were higher than the values determined after treatment by other chemicals for all process wastewater. Electrical conductivity values, however, were lower for Agrofloc 100 than for the others. Settled sludge volume experiments showed that settled sludge volumes decreased with time. The results of the quiescent settling experiment showed that the settling type could be termed flocculent settling. In the second part of the study, the usage of waste sludge from marble processing as an additive material in cement was investigated. The waste sludge originated from the wastewaters of different steps of the marble processing plant. Waste sludge was replaced with cement at various percentages by weight to prepare the mixtures of mortar. The specimens poured into the moulds were held for 24 h, removed from the moulds and held again for 28 days in lime-saturated water at 23 degrees C. Compressive and flexural strengths were evaluated with respect to percentages of waste sludge replaced with cement. The maximum compressive and flexural strengths were observed for specimens containing a 6% waste sludge when compared with control and it was also found that waste sludge up to 9% could effectively be used as an additive material in cement.     

An Investigation into the Influence of C. moschata Leaves Extract on Physicochemical and Biological Properties of Biodegradable PCL/PLA Blend Film

Journal of Polymers and the Environment - Poly ε-caprolactone (PCL) synthesized by ring-opening polymerization method, and then it blended with polylactic acid (PLA). The blend was loaded with...