Food selectivity and reproductive biology of small indigenous fish Indian river shad,Gudusia chapra (Hamilton, 1822) in a large tropical reservoir

Environmental Science and Pollution Research - Assessment of life history strategies of economically important small indigenous fishes (SIF) which are rich in nutritive values is essential and...     

Source identification,environmental risk assessment and human health risks associated with toxic elements present in a coastal industrial environment,India

This study investigated the source and contamination levels of toxic elements (Cd, Cr, As, Pb, Ni and Hg) present in a coastal environment, Paradip—an industrial hub of the east coast of India. The ecological risk assessment indices and human exposure models were used to evaluate the pollution status. Enrichment factor indicated that all the metal(loid)s found in the sediment are mostly derived from the anthropogenic source. According to the sediment quality quotient, 8.33% of sediments have crossed the ERM limit for Ni that can be fatal to biota. Meanwhile, 66.66, 41.66 and 8.33% of sediments have exceeded PEL range for Cr, Ni and As, respectively, that can register frequent lethal toxicity to benthic biota. As had the highest potential ecological harm coefficient (Er_f?>?80), and Hg had moderate ecological harm coefficient (40?<?Er_f?<?80). Summarily, the sediment quality of this site is moderate to heavily toxic to benthic organisms. The concentration of toxic metals in seawater was below the permissible limit (CCC and CMC) set by USEPA indicating that water is relatively safer for free floating aquatic biota. The health risk index of toxic metal (loid)s present in soils of the residential sites has confirmed that there is a severe non-carcinogenic threat for children (HI child?>?1) and a borderline carcinogenic risk for both adult and children. THQ_Cr possesses highest non-carcinogenic threat, which contributed approximately 50% to HI followed by THQ_As. The contribution of carcinogenic risk of chromium (CR_Cr) to TCR is approximately 60%. Cr is the significant contaminant of this site that has highest health effects. Highest exposure risks were associated with ingestion pathway accounting for about 85% of the total for most of the elements.     

High-molecular weight sulfur-containing aromatics refractory to weathering as determined by Fourier transform ion cyclotron resonance mass spectrometry

Biomarkers and low-molecular weight polyaromatic compounds have been extensively studied for their fate in the environment. They are used for oil spill source identification and monitoring of weathering and degradation processes. However, in some cases, the absence or presence of very low concentration of such components restricts the access of information to spill source. Here we followed the resistance of high-molecular weight sulfur-containing aromatics to the simulated weathering condition of North Sea crude oil by ultra high-resolution Fourier transform ion cyclotron resonance mass spectrometry. The sulfur aromatics in North Sea crude having double bond equivalents (DBE) from 6 to 14 with a mass range 188-674 Da were less influenced even after 6 months artificial weathering. Moreover, the ratio of dibenzothiophenes (DBE 9)/naphthenodibenzothiophenes (DBE 10) was 1.30 and 1.36 in crude oil and 6 months weathered sample, respectively reflecting its weathering stability. It also showed some differences within other oils. Hence, this ratio can be used as a marker of the studied crude and accordingly may be applied for spilled oil source identification in such instances where the light components have already been lost due to environmental influences.     

Long-term effect of rice-based farming systems on soil health

Integrated rice–fish culture, an age-old farming system, is a technology which could produce rice and fish sustainably at a time by optimizing scarce resource use through complementary use of land and water. An understanding of microbial processes is important for the management of farming systems as soil microbes are the living part of soil organic matter and play critical roles in soil C and N cycling and ecosystem functioning of farming system. Rice-based integrated farming system model for small and marginal farmers was established in 2001 at Central Rice Research Institute, Cuttack, Odisha. The different enterprises of farming system were rice–fish, fish–fingerlings, fruits, vegetables, rice–fish refuge, and agroforestry. This study was conducted with the objective to assess the soil physicochemical properties, microbial population, carbon and nitrogen fractions, soil enzymatic activity, and productivity of different enterprises. The effect of enterprises induced significant changes in the chemical composition and organic matter which in turn influenced the activities of enzymes (urease, acid, and alkaline phosphatase) involved in the C, N, and P cycles. The different enterprises of long-term rice-based farming system caused significant variations in nutrient content of soil, which was higher in rice–fish refuge followed by rice–fish enterprise. Highest microbial populations and enzymatic properties were recorded in rice–fish refuge system because of waterlogging and reduced condition prolonged in this system leading to less decomposition of organic matter. The maximum alkaline phosphatase, urease, and FDA were observed in rice–fish enterprise. However, highest acid phosphatase and dehydrogenase activity were obtained in vegetable enterprise and fish–fingerlings enterprise, respectively.     

A review on tertiary recycling of high-density polyethylene to fuel

Plastics have become an indispensable ingredient of human life. They are non-biodegradable polymers of mostly containing carbon, hydrogen, and few other elements such as chlorine, nitrogen etc. Rapid growth of the world population led to increased demand of commodity plastics. High density poly ethylene is one of the largest used commodity plastics due to its vast applications in many fields. Due to its non bio degradability and low life, HDPE contributes significantly to the problem of Municipal Waste Management. To avert environment pollution of HDPE wastes, they must be recycled and recovered. On the other hand, steady depletion of fossil fuel and increased energy demand, motivated the researchers and technologists to search and develop different energy sources. Waste to energy has been a significant way to utilize the waste sustainably, simultaneously add to meet the energy demand. Plastics being petrochemical origin have inherently high calorific value. Thus they can be converted back to useful energy. Many researches have been carried out to convert the waste plastics into liquid fuel by thermal and catalytic pyrolysis and this has led to establishment of a number of successful firms converting waste plastics to liquid fuels. This paper reviews the production and consumption HDPE, different methods of recycling of plastic with special reference to chemical degradation of HDPE to fuel. This also focuses on different factors that affect these degradations, the kinetics and mechanism of this reaction.     

Application of sequential leaching, risk indices and multivariate statistics to evaluate heavy metal contamination of estuarine sediments: Dhamara Estuary, East Coast of India

In the present study, concentration of some selected trace metals (Fe, Mn, Ni, Co, Pb, Zn, Cu, Cr and Cd) are measured in Brahmani, Baitarani river complex along with Dhamara estuary and its near shore. Chemical partitioning has been made to establish association of metals into different geochemical phases. The exchangeable fraction is having high environmental risk among non-lithogeneous phases due to greater potential for mobility into pore water. The metals with highest bio-availability being Cd, Zn and Cr. The metals like Mn, Zn, Cd and Cu represent an appreciable portion in carbonate phase. Fe–Mn oxides act as efficient scavenger for most of the metals playing a prime role in controlling their fate and transport. Among non-lithogeneous phases apart from reducible, Cr showed a significant enrichment in organic phase. Risk assessment code values indicate that all metals except Fe fall under medium-risk zone. In estuarine zone Cd, Zn, Pb and Cr are released to 32.43, 26.10, 21.81 and 20 %, respectively, indicating their significant bio-availability pose high ecological risk. A quantitative approach has been made through the use of different risk indices like enrichment factor, geo-accumulation index and pollution load index. Factor analysis indicates that in riverine zone, Fe–Mn oxides/hydroxides seem to play an important role in scavenging metals, in estuarine zone, organic precipitation and adsorption to the fine silt and clay particles while in coastal zone, co-precipitation with Fe could be the mechanism for the same. Canonical discriminant function indicates that it is highly successful in discriminating the groups as predicted.     

Study of Geochemical Association of Some Trace Metals in the Sediments of Chilika Lake: A Multivariate Statistical Approach

In order to establish the natural processes and geochemical factors responsible for enrichment of trace metal ions (Cu, Co, Ni, Zn and Cr) with respect to textural parameters (sand, silt and clay weight percentages) along with depth, multivariate statistical approach has been carried out for sediments in different water zones of Chilika lake, the largest brackish water lagoon in Asia. The rotated varimax factor results reveal that Cobalt enrichment is controlled by both textural parameters as well as adsorption mechanism. In fresh and saline water region, textural parameters and in mixed water, adsorption phenomenon predominates. Zn in fresh water is related to clay, whereas it is in adsorbed state in mixed water. Cu in fresh water sediments is in absorbed state and in mixed water it is related to depth and Co concentration. Cr does not show any specific association in fresh water, but in both mixed and saline water it is associated with clay minerals. Although both textural parameters and adsorption mechanism play an important role for the enrichment of trace metal ions in these lagoonal sediments, their relative importance varies with specific metal ions as well as the water quality. Sequential extraction technique was used to characterize the various forms of metals in the < 63μ size sediments of Chilika lake. The concentrations determined indicated selective accumulation of the various metals in the different phases with spatial variability in different water zones. Slightly higher availability of Co and Zn near Balugaon township in exchangeable phase may be related to anthropogenic activities. Among the non-lithogenous (NL) phases, reducible phase associated with higher concentration of Ni, Cu and Cr. Organic bound Zn and Co contributed highest percentages among NL fractions. Residual fraction contributed more than 50% in most of the cases, reflected the predominance of physical weathering, high erosion rate along the drainage basin.     

Bioremediation of chromium by novel strains Enterobacter aerogenes T2 and Acinetobacter sp. PD 12 S2

Purpose

This study had an objective to identify the most potent chromium-resistant bacteria isolated from tannery effluent and apply them for bioremediation of chromium in tannery effluents.

Methods

Two such strains (previously characterized and identified by us)??Enterobacter aerogenes (NCBI GenBank USA Accession no. GU265554) and Acinetobacter sp. PD 12 (NCBI GenBank USA Accession no. GU084179)??showed powerful chromium resistivity and bioremediation capabilities among many stains isolated from tannery waste. Parameters such as pH, concentration of hexavalent chromium or Cr (VI), and inoculum volume were varied to observe optimum bioconversion and bioaccumulation of Cr (VI) when the said strains were grown in M9 minimal salt media. E. aerogenes was used to remediate chromium from tannery effluents in a laboratory level experiment.

Results

Observation by Scanning Electron Microscope and chromium peak in Energy Dispersive X-ray Spectroscopic microanalysis revealed that E. aerogenes helped remediate a moderate amount of Cr (VI) (8?C16?mg?L^?1) over a wide range of pH values at 35?C37°C (within 26.05?h). High inoculum percentage of Acinetobacter sp. PD 12 also enabled bioremediation of 8?C16?mg?L^?1 of Cr (VI) over a wide range of temperature (25?C37°C), mainly at pH?7 (within 63.28?h). The experiment with real tannery effluent gave very encouraging results.

Conclusion

The strain E. aerogenes can be used in bioremediation of Cr (VI) since it could work in actual environmental conditions with extraordinarily high capacity.     

Recovery of acetylcholine esterase activity of Drawida willsi (Oligochaeta) following application of three pesticides to soil

The recovery of acetylcholine esterase (AChE) activity of a dominant crop field earthworm (Drawida willsi, Michaelsen) was investigated under laboratory conditions following the application of two recommended agricultural (single and double) doses of butachlor (1.1 and 2.2 mga.i.kg(-1) dry soil), malathion (2.2 and 4.4 mga.i.kg(-1) dry soil) and carbofuran (1.1 and 2.2 mga.i.kg(-1) dry soil) to the soil. A sharp decline in the AChE activity of D. willsi was observed up to 9 and 12 days following treatment of carbofuran and malathion in both single and double doses, respectively, whereas very little inhibition was noticed in case of butachlor. D. willsi worms took 45 and 75 days to resume normal AChE activity after exposure to both single and double doses of malathion and carbofuran, respectively. Earlier [Soil Biol. Biochem. 31 (1999) 363-366], [Ph.D. thesis, Sambalpur University, Orissa, India, 2003] and [Pedobiologia (spl. issue), in press] reported that D. willsi takes 75-90 days and 90-105 days to resume normal growth and reproduction following application of both single and double agricultural doses of malathion and carbofuran, respectively. On the basis of the present and previous studies, we strongly suggest that the time gap between the first and second application of malathion, irrespective of single and double dosage, should be at least 90 days, whereas it should be at least 105 days for carbofuran. Butachlor was found to be very toxic, suppressing growth, sexual maturation and cocoon production of D. willsi at both single and double doses [Ph.D. thesis, Sambalpur University, Orissa, India, 2003]. We therefore suggest that application of organochlorine pesticides like butachlor should be avoided as far as possible to ensure maintenance of good soil health.