Independent factors associated with bicycle helmet use in a Korean population: A cross-sectional study

Objective: Although identification of factors that influence helmet use during bicycle riding is necessary for the selection of groups that require safe cycling education, limited baseline data are available. The aim of the present study was to analyze the rate of helmet use and the demographic factors that were independently associated with helmet use among Korean bicycle riders.

Methods: In this cross-sectional study, we used public data from the Sixth Korean National Health and Nutrition Examination Survey conducted in 2013 and 2014. Helmet users were defined as subjects who always, usually, or frequently wore helmets when cycling. Independent factors associated with helmet use were determined using odds ratios (ORss) adjusted for 5 demographic factors via multivariate logistic regression analysis.

Results: In the total population, 4,103 individuals were bicycle riders; among these, 782 individuals (19.1%) wore helmets. A total of 21.1% of male riders used helmets, compared to 15.5% of female riders (P <.001). The adjusted logistic regression model revealed that female sex (OR = 0.665; 95% confidence interval [CI], 0.554–0.797), teenage status (OR = 0.475, 95% CI, 0.333–0.678), and low household income (OR = 0.657, 95% CI 0.513–0.841) were significantly associated with nonuse of helmets.

Conclusions: Female sex, teenage status, and low household income were independent factors associated with the nonuse of helmets. We identified factors associated with helmet use during bicycle riding through analysis of baseline data on helmet usage.     

Installation of platform screen doors and their impact on indoor air quality: Seoul subway trains

In this study, variations of particulate matter (PM) concentrations in subway trains following installation of platform screen doors (PSDs) in the Seoul subway system were investigated. PM samples were collected in the trains on subway lines 1–8 before and after installation of PSDs. It was found that the mean PM₁₀ concentration in the trains after PSDs installation increased significantly by 29.9% compared to that before installation. In particular, the increase of PM₁₀ in line 6 was the highest at 103%. When the relationship between PM₁₀ and PM_2.5 was compared, coefficients of determination (r²) before and after PSDs installations were 0.696 and 0.169, respectively. This suggests that air mixing between the platform and the tunnel after PSDs installation was extremely restricted. In addition, the indoor/outdoor PM₁₀ ratio following PSDs installation increased from 1.32 to 2.97 relative to the period with no installed PSDs. Furthermore, this study revealed that PM levels in subway trains increased significantly after all underground PSDs were put in use. Several potential factors were examined that could result in this PM increase, such as train ventilation systems, operational conditions, passenger volume, subway depth, and the length of underground segments.

ImplicationsPM₁₀ concentrations inside the subway trains increased after PSDs installation. This indicates that air quality in trains was very seriously impacted by PSDs. PM₁₀ levels were also influenced by the tunnel depth and length of the underground segments. To prevent the adverse effect on human health by PM₁₀ emitted from the tunnel, an applicable ventilation system to reduce PM₁₀ is required inside trains and tunnels.     

Decision-Tree-based data mining and rule induction for predicting and mapping soil bacterial diversity

Soilmicrobial ecology plays a significant role in global ecosystems. Nevertheless, methods of model prediction and mapping have yet to be established for soil microbial ecology. The present study was undertaken to develop an artificial-intelligence- and geographical information system (GIS)-integrated framework for predicting and mapping soil bacterial diversity using pre-existing environmental geospatial database information, and to further evaluate the applicability of soil bacterial diversity mapping for planning construction of eco-friendly roads. Using a stratified random sampling, soil bacterial diversity was measured in 196 soil samples in a forest area where construction of an eco-friendly road was planned. Model accuracy, coherence analyses, and tree analysis were systematically performed, and four-class discretized decision tree (DT) with ordinary pair-wise partitioning (OPP) was selected as the optimal model among tested five DT model variants. GIS-based simulations of the optimal DT model with varying weights assigned to soil ecological quality showed that the inclusion of soil ecology in environmental components, which are considered in environmental impact assessment, significantly affects the spatial distributions of overall environmental quality values as well as the determination of an environmentally optimized road route. This work suggests a guideline to use systematic accuracy, coherence, and tree analyses in selecting an optimal DT model from multiple candidate model variants, and demonstrates the applicability of the OPP-improved DT integrated with GIS in rule induction for mapping bacterial diversity. These findings also provide implication on the significance of soil microbial ecology in environmental impact assessment and eco-friendly construction planning.     

Synthesis and application of insect attractants in Vietnam

Detrimental effects of synthetic pesticides on health, environment and organisms have necessitated the exploration of alternative strategies for insect control. The insect attractants represent an important link within these systems. In Vietnam, since 1970, methyleugenol and its analogues have been synthesized for mass trapping of the fruitfly Daccus dorsalis Hendel. This chemical reduced the damage on the oranges of many plantations in our country. In the period 1978–1980, for the first time some selected types of pheromones were tested. The trials verified and provided evidence of the occurrence of six species of moth in southeast Vietnam: Archips micaceanus, Archips seminubilus, Cadra caustella, Spodoptera exigua, Chysodeixis eriosoma and Parapoynx sp. The last decade has seen intense activity in the elaboration and application of some complex systems of fighting plant pests. Pheromones of moth and weevils have been prepared in the Institute of Agrochemistry and the Institute of Tropical Biology NCST: Ostrinia nubilalis Hbn, Heliothis armigera Hbn, Plutella xylostella Curt, Adoxophyes sp, Lyonetia clerckella, Trogoderma granarium, Diabrotica virgifera virgifera, Diabrotica undecimpunctata, Blattela germanica, Diprion, Neodiprion, Scolytus multistriatus, Scolytus scolytus, Lasioderma sericorne, Tribolium cofusum. Some synthetic aspects of these pheromones are described. The use of pheromone traps for monitoring and mass trapping the Scolytus multistriatus, Tribolium confusum, Plutella xylostella Curt, Heliothis armigera Hbn, Cylas formicarius elegantulus will be discussed.     

In vivo evaluation and comparison of developmental toxicity and teratogenicity of perfluoroalkyl compounds using Xenopus embryos

Perfluoroalkyl compounds (PFCs) are environmental toxicants that persistently accumulate in human blood. Their widespread detection and accumulation in the environment raise concerns about whether these chemicals might be developmental toxicants and teratogens in ecosystem. We evaluated and compared the toxicity of PFCs of containing various numbers of carbon atoms (C8–11 carbons) on vertebrate embryogenesis. We assessed the developmental toxicity and teratogenicity of various PFCs. The toxic effects on Xenopus embryos were evaluated using different methods. We measured teratogenic indices (TIs), and investigated the mechanisms underlying developmental toxicity and teratogenicity by measuring the expression of organ-specific biomarkers such as xPTB (liver), Nkx2.5 (heart), and Cyl18 (intestine). All PFCs that we tested were found to be developmental toxicants and teratogens. Their toxic effects were strengthened with increasing length of the fluorinated carbon chain. Furthermore, we produced evidence showing that perfluorodecanoic acid (PFDA) and perfluoroundecanoic acid (PFuDA) are more potent developmental toxicants and teratogens in an animal model compared to the other PFCs we evaluated [perfluorooctanoic acid (PFOA) and perfluorononanoic acid (PFNA)]. In particular, severe defects resulting from PFDA and PFuDA exposure were observed in the liver and heart, respectively, using whole mount in situ hybridization, real-time PCR, pathologic analysis of the heart, and dissection of the liver. Our studies suggest that most PFCs are developmental toxicants and teratogens, however, compounds that have higher numbers of carbons (i.e., PFDA and PFuDA) exert more potent effects.     

Monitoring and risk assessment of polychlorinated biphenyls (PCBs) in agricultural soil from two industrialized areas

For monitoring and risk assessment, levels and distributions of Σ₂₉ PCBs in paddy soil samples collected from Gwangyang (10 sites) and Ulsan (20 sites), heavily industrialized cities in Korea, were investigated using high-resolution gas chromatography/high-resolution mass spectrometry. Overall, total concentrations of Σ₂₉ PCBs in Gwangyang (216.4–978.6 pg g^?1 dw) and Ulsan (273.8–1824.1 pg g^?1 dw) were higher than those (106.6–222.6 pg g^?1 dw) in agricultural soil from Anseong in Korea. The TEQ (toxic equivalency) values from Gwangyang (0.06–0.40 ng TEQ kg^?1 dw) and Ulsan (0.06–0.22 ng TEQ kg^?1 dw) were higher than those (0.04–0.11 ng TEQ kg^?1 dw) in Anseong but lower than the WHO threshold level (20 ng TEQ kg^?1). However, one of the most toxic congeners, PCB 126, gave the highest concentration, possibly posing a risk to the biota. Seven indicator PCB congeners contributed to 50–80% of the total concentration of Σ₂₉ PCBs, indicating the 7 PCBs can be used as valuable indicators for monitoring. The principal component analysis and cluster analysis for the homologue profiles of PCBs indicated that all the samples from both cities had the similar PCB contamination patterns, and the major sources of the PCB contamination were most likely from the usage of Aroclor 1254 than those of Aroclors 1242 and 1260. These PCB technical mixtures were possibly significantly used by various industries including iron and steel industries in Gwangyang and petrochemical and shipbuilding industries in Ulsan.     

Ethylbenzene removal in a multiple-stage biofilter

In practice, biofilters are often conceived as entire, single-unit systems. However, the activity of a biofilter varies greatly over its depth. For a given period, each stage of the biofilter dominates ethylbenzene removal. Ethylbenzene was continuously removed in a mixed-medium biofilter. The overall removal efficiency of the ethylbenzene ranged from 70% to greater than 99%. In the upflow biofilter, the most dominant ethylbenzene degrading stage shifted consecutively from the bottom to the top of the reactor. Average water content throughout the biofilter media was relatively consistent. However, the water content of each stage fluctuated dramatically and was correlated with the ethylbenzene removal rate. Without any water addition, the biofilter was operated for 62 days above the target removal efficiency of 80%. A 9-month slow-release fertilizer, mixed with composting media, was an effective way to eliminate the nutrient deficiency in the biofilter operation.     

科技进步与增加农民收入

本文论述了科技进步对增加农民收入的作用是无限的,指出科技进步是增加农民收入的根本途径;阐述了进步在增加农民收入上的功能作用;阐明了依靠科技进步增加农民收入的对策措施.     

Process control factors for continuous microbial perchlorate reduction in the presence of zero-valent iron

Process control parameters influencing microbial perchlorate reduction via a flow-through zero-valent iron （ZVI） column reactor were investigated in order to optimize perchlorate removal from water. Mixed perchlorate reducers were obtained from a wastewater treatment plant and inoculated into the reactor without further acclimation. Examined parameters included hydraulic residence time （HRT）, pH, nutrients requirement, and perchlorate reduction kinetics. The minimum HRT for the system was concluded to be 8 hr. The removal efficiency of 10 mg. L-1 influent perchlorate concentration was reduced by 20%-80% without control to the neutral pH （HRT = 8 hr）. Therefore pH was determined to be an important parameter for microbial perchlorate reduction. Furthermore, a viable alternative to pH buffer was discussed. The microbial perchlorate reduction followed the first order kinetics, with a rate constant （K） of 0.761 hr-1. The results from this study will contribute to the implementation of a safe, cost effective, and efficient system for perchlorate reduction to below regulated levels.