Trace Element Patterns and Seasonal Variability of Dust Precipitation in a Low Polluted City – The Example of Karlsruhe/Germany

Urban areas of different land uses can be distinguished by their specific patterns of atmospheric dust and trace element precipitation. Dusts emitted from industrial areas with fossil fuel processing, for instance, are enriched in V, Ni and Co. Cluster analysis groups sampling sites based on their specific element patterns. The resulting groups correspond to the surrounding land use: Urban sampling sites were identified showing similar patterns of dust and trace element precipitation as a reference site; dusts of other urban sites were influenced by diffuse pollution (caused by non-point and dispersed pollution sources), or by specific industrial emissions. Cluster analysis was also used to characterize the chemical dust composition. Three clusters of typical element associations were distinguished. These clusters represent the dust matrix, diffuse urban pollution and pollution due to fossil fuel processing. Dust precipitation and chemical dust composition show seasonal variations. Dust precipitation and concentrations of trace elements in the precipitated dust are negatively correlated during the annual courses. The highest concentrations of trace elements occur during winter, whereas the highest precipitations of dust were found during summer. This finding stresses that both, precipitation and concentration have to be addressed for the environmental assessment of urban dusts.     

The distribution of octachlorostyrene (OCS) in environmental samples from Europe

Although octachlorostyrene (OCS) was never used as a commercial product, it may be produced during incineration and combustion processes involving chlorinated compounds. Its environmental spreading was evaluated through the analysis of several representative samples. OCS could not be measured in soil samples collected from urban and rural areas or sediments, but was present (up to 5.41 ng/g dry weight) in industrial soil collected near chemically polluted areas. For aquatic biota samples, the OCS concentrations in freshwater mussels ranged from <0.01 ng/g wet weight (ww) to 0.18 ng/g ww (mean 0.06 ng/g ww) and similar levels could be measured in 11 freshwater fish species from Belgium and Romania. A higher OCS contamination level was found in shrimps (mean 0.08 ng/g ww) compared to marine fish (mean 0.02 ng/g ww for bib and 0.01 ng/g ww for sole and whiting, respectively). OCS could also be measured in 19 harbour porpoise (Phocoena phocoena) liver samples with a mean value of 1.90 ng/g ww. According to these data, it could be computed that the biomagnification factor for OCS was one order of magnitude lower than that of HCB in the fish-porpoise food chain. The mean OCS concentrations in blue tits (Parus caeruleus) eggs and great tits (Parus major) adipose tissue were 1.24 ng/g ww and 3.24 ng/g ww, respectively. OCS could be measured in different tissues of hedgehog (Erinaceus europaeus), with the highest concentrations found in adipose tissue (mean 0.34 ng/g ww) and liver (mean 0.39 ng/g ww). In contrast, only low concentrations of OCS could be measured in human adipose tissue (up to 0.38 ng/g ww) and liver (up to 0.05 ng/g ww), while it could not be detected in human brain or lung. The relationship between the concentrations of OCS and HCB was also discussed for each species.     

New international long-term ecological research on air pollution effects on the Carpathian Mountain forests,Central Europe

An international cooperative project on distribution of ozone in the Carpathian Mountains, Central Europe was conducted from 1997 to 1999. Results of that project indicated that in large parts of the Carpathian Mountains, concentrations of ozone were elevated and potentially phytotoxic to forest vegetation. That study led to the establishment of new long-term studies on ecological changes in forests and other ecosystems caused by air pollution in the Retezat Mountains, Southern Carpathians, Romania and in the Tatra Mountains, Western Carpathians on the Polish-Slovak border. Both of these important mountain ranges have the status of national parks and are Man & the Biosphere Reserves. In the Retezat Mountains, the primary research objective was to evaluate how air pollution may affect forest health and biodiversity. The main research objective in the Tatra Mountains was to evaluate responses of natural and managed Norway spruce forests to air pollution and other stresses. Ambient concentrations of ozone (O(3)), sulfur dioxide (SO(2)), nitrogen oxides (NO(x)) as well as forest health and biodiversity changes were monitored on densely distributed research sites. Initial monitoring of pollutants indicated low levels of O(3), SO(2), and NO(x) in the Retezat Mountains, while elevated levels of O(3) and high deposition of atmospheric sulfur (S) and nitrogen (N) have characterized the Tatra Mountains. In the Retezat Mountains, air pollution seems to have little effect on forest health; however, there was concern that over a long time, even low levels of pollution may affect biodiversity of this important ecosystem. In contrast, severe decline of Norway spruce has been observed in the Tatra Mountains. Although bark beetle seems to be the immediate cause of that decline, long-term elevated levels of atmospheric N and S depositions and elevated O(3) could predispose trees to insect attacks and other stresses. European and US scientists studied pollution deposition, soil and plant chemistry, O(3)-sensitive plant species, forest insects, and genetic changes in the Retezat and Tatra Mountains. Results of these investigations are presented in a GIS format to allow for a better understanding of the changes and the recommendations for effective management in these two areas.     

CO2 storage capacity estimation: Methodology and gaps

Implementation of CO₂ capture and geological storage (CCGS) technology at the scale needed to achieve a significant and meaningful reduction in CO₂ emissions requires knowledge of the available CO₂ storage capacity. CO₂ storage capacity assessments may be conducted at various scales—in decreasing order of size and increasing order of resolution: country, basin, regional, local and site-specific. Estimation of the CO₂ storage capacity in depleted oil and gas reservoirs is straightforward and is based on recoverable reserves, reservoir properties and in situ CO₂ characteristics. In the case of CO₂-EOR, the CO₂ storage capacity can be roughly evaluated on the basis of worldwide field experience or more accurately through numerical simulations. Determination of the theoretical CO₂ storage capacity in coal beds is based on coal thickness and CO₂ adsorption isotherms, and recovery and completion factors. Evaluation of the CO₂ storage capacity in deep saline aquifers is very complex because four trapping mechanisms that act at different rates are involved and, at times, all mechanisms may be operating simultaneously. The level of detail and resolution required in the data make reliable and accurate estimation of CO₂ storage capacity in deep saline aquifers practical only at the local and site-specific scales. This paper follows a previous one on issues and development of standards for CO₂ storage capacity estimation, and provides a clear set of definitions and methodologies for the assessment of CO₂ storage capacity in geological media. Notwithstanding the defined methodologies suggested for estimating CO₂ storage capacity, major challenges lie ahead because of lack of data, particularly for coal beds and deep saline aquifers, lack of knowledge about the coefficients that reduce storage capacity from theoretical to effective and to practical, and lack of knowledge about the interplay between various trapping mechanisms at work in deep saline aquifers.     

WATER MANAGEMENT IN ONTARIO1

ABSTRACT: The Ontario Ministry of the Environment has based its water quality management approach on a set of guidelines published in 1970. In light of the changing societal and economic background, advancement in technology and scientific knowledge, and philosophical attitudes towards water management, the water management program was recently revised. Factors influencing the revised approach, including federal-provincial interrelationships and international commitments under the Canada-U.S. Agreement, are summarized. The revised program consists of a goal statement, policies to implement this goal, revised water quality objectives, and detailed implementation procedures for field staff use. Rather than promulgating regulations to impose arbitrary effluent or receiving water standards on a province-wide basis, the revised approach involves the imposition of legally enforceable effluent requirements on a case-by-case basis. Although the paper emphasizes the surface water quality program, it also outlines the Ministry's goals, policies, and procedures for the management of surface-water quantity, as well as ground water quality and quantity.     

Chlorinated solvents in a petrochemical wastewater treatment plant: an assessment of their removal using self-organising maps

The self-organising map approach was used to assess the efficiency of chlorinated solvent removal from petrochemical wastewater in a refinery wastewater treatment plant. Chlorinated solvents and inorganic anions (11 variables) were determined in 72 wastewater samples, collected from three different purification streams. The classification of variables identified technical solvents, brine from oil desalting and runoff sulphates as pollution sources in the refinery, affecting the quality of wastewater treatment plant influent. The classification of samples revealed the formation of five clusters: the first three clusters contained samples collected from the drainage water, process water and oiled rainwater treatment streams. The fourth cluster consisted mainly of samples collected after biological treatment, and the fifth one of samples collected after an unusual event. SOM analysis showed that the biological treatment step significantly reduced concentrations of chlorinated solvents in wastewater.     

MR imaging of the fetal musculoskeletal system

Magnetic resonance imaging (MRI) appears to be increasingly used, in addition to standard ultrasonography for the diagnosis of abnormalities in utero. Previous studies have recently drawn attention to the technical refinement of MRI to visualize the fetal bones and muscles. Beyond commonly used T2-weighted MRI, echoplanar, thick-slab T2-weighted and dynamic sequences, and three-dimensional MRI techniques, are about to provide new imaging insights into the normal and the pathological musculoskeletal system of the fetus. This review emphasizes the potential significance of MRI in the visualization of the fetal musculoskeletal system. © 2012 John Wiley & Sons, Ltd.     

Aspekte der Phytoremediation organischer Schadstoffe

Phytoremediation is the quite novel technique of cleaning polluted sites through the use of plants. Phytoremediation methods are comparatively cheap, are accepted by the public and are ecologically advantageous, compared to common technological approaches. Until today, there have been only a few examples for successful applications. One reason is that the processes occurring are complex, and a full clean up may require many years. Plants have an influence on the water balance of a site, they change redox potential and pH, and stimulate microbial activity of the soil. These indirect influences may accelerate degradation in the root zone or reduce the leaching of compounds into the groundwater. Compounds taken up into plants may be metabolised, accumulate, or volatilise into air. Based on these processes, several phytoremediation methods have been developed: Phytoextraction, rhizofiltration, phytostabilisation, rhizound phytodegradation, pump and tree, land farming, phytovolatilisation, hydraulic control and even more. Already in use are plants (and here mainly willows, poplars and grasses) for the degradation of petroleum products, aromatic hydrocarbons (BTEX), chlorinated solvents, explosives and cyanides. Phytotoxicity and pollutants mass balance have rarely been documented carefully. Often, the success of the projects was not controlled, and only estimates can be made about the applicability and the potential of phytoremediation. This lack of experience about possibilities and limitations seems to be a hindrance for a broader use of these techniques.