Comparing the impacts of hiking, skiing and horse riding on trail and vegetation in different types of forest

Nature-based tourism in protected areas has increased and diversified dramatically during the last decades. Different recreational activities have a range of impacts on natural environments. This paper reports results from a comparison of the impacts of hiking, cross-country skiing and horse riding on trail characteristics and vegetation in northern Finland. Widths and depths of existing trails, and vegetation on trails and in the neighbouring forests were monitored in two research sites during 2001 and 2002. Trail characteristics and vegetation were clearly related to the recreational activity, research site and forest type. Horse trails were as deep as hiking trails, even though the annual number of users was 150-fold higher on the hiking trails. Simultaneously, cross-country skiing had the least effect on trails due to the protective snow cover during winter. Hiking trail plots had little or no vegetation cover, horse riding trail plots had lower vegetation cover than forest plots, while skiing had no impact on total vegetation cover. On the other hand, on horse riding trails there were more forbs and grasses, many of which did not grow naturally in the forest. These species that were limited to riding trails may change the structure of adjacent plant communities in the long run. Therefore, the type of activities undertaken and the sensitivity of habitats to these activities should be a major consideration in the planning and management of nature-based tourism. Establishment of artificial structures, such as stairs, duckboards and trail cover, or complete closure of the site, may be the only way to protect the most sensitive or deteriorated sites.     

The Use of Nahcolite Ore and Bag Filters For Sulfur Dioxide Emission Control

This paper describes some technical and economic aspects of the nahcolite ore injection process for the simultaneous removal of fly ash and sulfur oxides from stack gases. The process is capable of removing greater than 99% of the particulate matter and greater than 70% of the sulfur oxides present in such gases. In the process, nahcolite ore, a naturally occurring material containing 70 to 90% sodium bicarbonate, is ground to 90% passing through —200 mesh screens. Approximately 20% of the ground ore is used to precoat the filter bags in a baghouse filter while the remainder of the material is fed into the flue gas Just ahead of the baghouse. The flue gas is drawn through the baghouse by induced draft fans and sent up the stack. Most of the SO₂ and practically all of the fly ash in the flue gas can be removed as the gas passes through the filter bags. The spent nahcolite ore and fly ash are collected and conveyed to waste disposal as landfill, or alternatively processed for insolubilization by coprecipitation prior to landfilling. The technical feasibility of the process has been demonstrated in both bench scale and pilot scale engineering studies. Economic analyses performed for the cases of plants located in the midwest and southwest indicate lower capital costs for the nahcolite injection process when compared to wet scrubbing. On an annual cost basis, the nahcolite ore Injection process is comparable in cost to wet scrubbing for the case of the southwestern power plant, and somewhat more expensive for the case of the midwestern plant.     

Partitioning of perfluorooctanoate (PFOA), perfluorooctane sulfonate (PFOS) and perfluorooctane sulfonamide (PFOSA) between water and sediment

Laboratory partitioning experiments were conducted to elucidate the sorption behaviour and partitioning of perfluoroalkyl compounds (PFCs). Three different sediment types were used and separately spiked with perfluorooctanoate (PFOA), perfluorooctane sulfonate (PFOS) and perfluorooctane sulfonamide (PFOSA) at low environmentally realistic concentrations. PFOA, PFOS and PFOSA were mainly distributed in the dissolved phase at low suspended solid concentrations, indicating their long-range transport potential in the marine environment. In all cases, the equilibrium isotherms were linear and the organic carbon normalised partition coefficients (K_OC) decreased in the following order: PFOSA (log K_OC = 4.1 ± 0.35 cm³ g⁻¹) > PFOS (3.7 ± 0.56 cm³ g⁻¹) > PFOA (2.4 ± 0.12 cm³ g⁻¹). The level of organic content had a significant influence on the partitioning. For the sediment with negligible organic content the density of the sediment became the most important factor influencing the partitioning. Ultimately, data on the partitioning of PFCs between aqueous media and suspended solids are essential for modelling their transport and environmental fate.     

Projecting Climate Change Effects on Forest Net Primary Productivity in Subtropical Louisiana,USA

This study projected responses of forest net primary productivity (NPP) to three climate change scenarios at a resolution of 5 km × 5 km across the state of Louisiana, USA. In addition, we assessed uncertainties associated with the NPP projection at the grid and state levels. Climate data of the scenarios were derived from Community Climate System Model outputs. Changes in annual NPP between 2000 and 2050 were projected with the forest ecosystem model PnET-II. Results showed that forest productivity would increase under climate change scenarios A1B and A2, but with scenario B1, it would peak during 2011–2020 and then decline. The projected average NPP under B1 over the years from 2000 to 2050 was significantly different from those under A1B and A2. Forest NPP appeared to be primarily a function of temperature, not precipitation. Uncertainties of the NPP projection were due to large spatial resolution of the climate variables. Overall, this study suggested that in order to project effects of climate change on forest ecosystem at regional level, modeling uncertainties could be reduced by increasing the spatial resolution of the climate projections.     

Dietary exposure to di-isobutyl phthalate increases urinary 5-methyl-2′-deoxycytidine level and affects reproductive function in adult male mice

Phthalates are a large family of ubiquitous environmental pollutants suspected of being endocrine disruptors. Epidemiological studies have associated phthalate metabolites with decreased reproductive parameters and linked phthalate exposure with the level of urinary 5-methyl-2′-deoxycytidine(5mdC, a product of methylated DNA). In this study, adult male mice were exposed to 450 mg di-isobutyl phthalate(DiBP)/(kg·day) via dietary exposure for 28 days. Mono-isobutyl phthalate(Mi BP, the urinary metabolite) and reproductive function parameters were determined. The levels of 5mdC and 5-hydroxymethyl-2′-deoxycytidine(5hmdC) were measured in urine to evaluate if their contents were also altered by DiBP exposure in this animal model. Results showed that DiBP exposure led to a significant increase in the urinary 5mdC level and significant decreases in sperm concentration and motility in the epididymis, accompanied with reduced testosterone levels and downregulation of the P450 cholesterol side-chain cleavage enzyme(P450scc) gene in the mice testes. Our findings indicated that exposure to DiBP increased the urinary 5mdC levels,which supported our recent epidemiological study about the associations of urinary 5mdC with phthalate exposure in the male human population. In addition, DiBP exposure impaired male reproductive function, possibly by disturbing testosterone levels; P450scc might be a major steroidogenic enzyme targeted by DiBP or other phthalates.     

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.     

Use of ATP Readings to Predict a Successful Hygiene Intervention in the Workplace to Reduce the Spread of Viruses on Fomites

The purpose of this study was to validate the use of adenosine triphosphate (ATP) for evaluating hygiene intervention effectiveness in reducing viral dissemination in an office environment. The bacterial virus MS-2 was used to evaluate two scenarios, one where the hand of an individual was contaminated and another where a fomite was contaminated. MS-2 was selected as a model because its shape and size are similar to many human pathogenic viruses. Two separate experiments were conducted, one in which the entrance door push plate was inoculated and the other in which the hand of one selected employee was inoculated. In both scenarios, 54 selected surfaces in the office were tested to assess the dissemination of the virus within the office. Associated surface contamination was also measured employing an ATP meter. More than half of the tested hands and surfaces in the office were contaminated with MS-2 within 4 h. Next, an intervention was conducted, and each scenario was repeated. Half of the participating employees were provided hand sanitizer, facial tissues, and disinfecting wipes, and were instructed in their use. A significant (p < 0.05) reduction was observed in the number of surfaces contaminated with virus. This reduction in viral spread was evident from the results of both viral culture and the surface ATP measurements, although there was no direct correlation between ATP measurements with respect to viral concentration. Although ATP does not measure viruses, these results demonstrate that ATP measurements could be useful for evaluating the effectiveness of hygiene interventions aimed at preventing viral spread in the workplace.     

Tool wear of coated drills in drilling CFRP

This study aimed to investigate the wear of certain coated drills when drilling carbon fiber reinforced composites (CFRP). Three different drills were used in the drilling experiments: uncoated, diamond coated and AlTiN coated carbide (WC–Co) drills. The tool wear in CFRP machining was quite different from that in conventional metal machining. The primary wear type was a dulling or blunting of the cutting edge, which has been referred to as edge rounding wear or edge recession. In this paper, a hypothesis has been developed to explain the edge rounding wear in CFRP machining. Due to the fracture-based chip formation of CFRP, there is lack of the work material stagnation zone in front of the cutting edge, which normally prevents the edge wear in metal machining. Series of wear lead to rapid dulling of the cutting edge. The resistance to edge rounding wear on the coated as well as uncoated drills has been investigated. The diamond coating significantly reduces the edge rounding wear. However, AlTiN coated drills showed no visible improvement over the uncoated carbide drill, despite of their high hardness, thus not protecting the drill. The wear mechanisms of the uncoated carbide drill and coatings are discussed. It is believed that the 2-body and 3-body abrasive wear fail to explain the observed tool wear in CFRP drilling. However, the wear of the coatings and uncoated carbide substrate from tribo-meter tests correlated well with the tool wear in the CFRP drilling. Therefore, the tribo-meter test can be used to screen the prospective tool materials before carrying drilling experiment.     

Building regional priorities in forests for development and adaptation to climate change in the Congo Basin

Indentifying common priorities in shared natural resource systems constitutes an important platform for implementing adaptation and a major step in sharing a common responsibility in addressing climate change. Predominated by discourses on REDD + (Reduced Emissions from Deforestation and Forest Degradation and conservation, sustainable management of forests and enhancement of forest carbon stocks in developing countries) with little emphasis on adaptation there is a risk of lack of policy measures in addressing climate change in the Congo Basin. Forest products and ecosystem services provide security portfolios for the predominantly rural communities, and play major roles in national development programmes in both revenue and employment opportunities. Thus, raising the profile of forests in the policy arena especially in the twin roles of addressing climate change in mitigation and adaptation and achieving resilient development is crucial. Within the framework of the Congo Basin Forests and Climate Change Adaptation project (COFCCA) project, science policy dialogue was conducted to identify and prioritize forest based sectors vulnerable to climate change but important to household livelihoods and national development. The goal of the prioritization process was for the development of intervention in forest as measures for climate change adaptation in Central Africa. Participants constituted a wide range of stakeholders (government, Non Governmental Organizations, research institutions, universities, community leaders, private sectors etc.) as representatives from three countries directly involved in the project: Cameroon, Central African Republic and Democratic Republic of Congo. Building on national priorities, four forest related sectors were identified as common priorities at the regional level for focus on climate change adaptation. These sectors included: (1) energy with emphasis on fuel wood and Charcoal; (2) Water principally quality, quantity, accessibility, etc.; (3) Food with emphasis on Non Timber Forest Products, and (4) Health linked to healthcare products (medicinal plants). Using these prioritized sectors, the project focused on addressing the impacts of climate change on local communities and the development of adaptation strategies in the three pilot countries of the Congo Basin region. The four sectors constitute the key for development in the region and equally considered as priority sectors in the poverty reduction papers. Focused research on these sectors can help to inject the role of forests in national and local development and their potentials contributions to climate change adaptation in national and public discourses. Mainstreaming forest for climate change adaptation into national development planning is the key to improve policy coherence and effectiveness in forest management in the region.     

水溶性有机物电子转移能力与荧光峰强度的关系研究

以不同来源的水溶性有机物（DOM）为供试材料,采用电化学方法和荧光光谱法研究了DOM电子转移能力及其与荧光峰强度的关系.采用库仑安培法测定DOM电子转移能力,其中测得的电子接受能力为635.6～1 049.3μmol.（g.C）-1,电子供给能力为27.3～42.3μmol.（g.C）-1.利用循环伏安法研究DOM电化学活性,发现其氧化还原电位在-731～-996 mV（vs.Ag/AgCl）之间.经过电位跃阶法三次氧化还原循环后电子转移能力仍可维持在232.1～897.2μmol.（g.C）-1之间,电子循环率为36.7%～78.2%,说明DOM具有重复利用、反复转移电子的特性.采用荧光激发发射光谱法（EEMS）测定DOM的类富里酸荧光峰强度并比较其与DOM电子转移能力的关系,发现DOM的类富里酸荧光峰强度与DOM的电子循环率具有显著相关（r2=0.92）.实验结果为理解DOM在元素循环、污染物降解以及生物地球化学循环中的作用提供科学依据.