Manufacture of strand board made from construction scrap wood

The objective of this research was to evaluate the physical and mechanical properties of strand board made from construction scrap wood. The strand board was manufactured using Sugi (Cryptomeria japonica D. Don) and Douglas-fir (Pseudotsuga japonica) strands selected from construction scrap wood. The strands were oriented, and three-layer (face/core/face) strand board of three types was produced: one in which the strands of the face layer were oriented at a right angle to those of the core layer (R board), another in which the strands of the face layer were oriented parallel to those of the core layer (P board), and a third in which the strands of both layers were oriented at random (Ra board). The physical and mechanical properties of the boards were evaluated based on Japanese Industrial Standard (JIS). The main results obtained are as follows: the bending strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard of JIS A 5908. The bending strength of the strand board was affected by board density, strand orientation and resin content, and became larger with increased density as well as resin content. That of the parallel specimen of P board was the largest among the specimen-orientations and types. The internal bond strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard and type 24-10 particleboard of JIS A 5908. The internal bond strength was markedly affected by the resin content of the core layer, and became larger with increased density. The thickness swelling of the strand board decreased with increased resin content, and become larger with increased density.     

Field monitoring of volatile organic compounds using passive air samplers in an industrial city in Japan

Highly portable, sensitive, and selective passive air samplers were used to investigate ambient volatile organic compound (VOC) levels at multiple sampling sites in an industrial city, Fuji, Japan. We determined the spatial distributions of 27 species of VOCs in three campaigns: Mar (cold season), May (warm season), and Nov (mild season) of 2004. In all campaigns, toluene (geometric mean concentration, 14.0microg/m3) was the most abundant VOC, followed by acetaldehyde (4.76microg/m3), and formaldehyde (2.58microg/m3). The spatial distributions for certain VOCs showed characteristic patterns: high concentrations of benzene and formaldehyde were typically found along major roads, whereas high concentrations of toluene and tetrachloroethylene (PCE) were usually found near factories. The spatial distribution of PCE observed was extremely consistent with the diffusion pattern calculated from Pollutant Release and Transfer Register data and meteorological data, indicated that passive air samplers are useful for determining the sources and distributions of ambient VOCs.     

Human intake of PCDDs, PCDFs, and dioxin like PCBs in Japan, 2001 and 2002

PCDDs, PCDFs, and dioxin like PCBs (dioxin) surveillance results derived from regular environmental monitoring as well as other dioxin surveys by national and local governmental bodies in Japan were collected and analyzed. Several thousand data for air and soil in fiscal year 2001 (from 01/04/2001 to 31/03/2002) and 2002, water (from the sea, rivers and lakes), sediment (from the sea, rivers and lakes), ground water, aquatic organisms, purified water from water purification plants, raw water from water purification plants, human breast milk, and human blood in fiscal 2001, and total diet study (TDS) and various kinds of foodstuff in fiscal 1998-2002 were collected. Average human uptake of dioxin in Japan in fiscal 2001 was estimated at 1.68 pg-TEQ/kg-bw/day, while uptake in fiscal 2002 was estimated at 1.52 pg-TEQ/kg-bw/day. Diet accounted for more than 90% of the total intake. Contributions of inhalation and soil ingestion were relatively small. Age-group-specific contribution of various foodstuff to total dietary intake was also estimated. The estimates of intake through fish and shellfish accounted for approximately 45-70% of total dietary intake in each age group. Monte Carlo simulation was conducted, using the data of the air and soil concentrations in fiscal 2001 and the total diet study data in fiscal 1998-2001, in order to obtain information on the variability of dioxin intake; The estimated average, median, 5th percentile and 95th percentile of the intake distribution were 1.78, 1.69, 0.95 and 2.91 pg-TEQ/kg-bw/day, respectively. This study found that the average total intake estimates in Japan in both fiscal 2001 and 2002 were estimated to be below tolerable daily intake level (TDI) defined by the Ministry of Health, Labour and Welfare, Japan (i.e. 4 pg-TEQ/kg-bw/day). The 95th percentile of the dioxin intake distributions estimated with Monte Carlo simulation using the data of the air and soil concentrations in fiscal 2001 and TDS data in fiscal 1998-2001 was also below the Japanese TDI.     

Gene expression profiles in the testis associated with testis-ova in adult Japanese medaka (Oryziaslatipes) exposed to 17α-ethinylestradiol

The occurrence of oocytes in the testis (testis-ova) of several fish species is often associated with exposure of estrogenic chemicals. However, induction mechanisms of the testis-ova remain to be elucidated. To develop marker genes for detecting testis-ova in the testis, adult male medaka were exposed to nominal concentration of 100 ng L⁻¹ of 17α-ethinylestradiol (EE2) for 3-5 weeks, and 800 ng estradiol benzoate (EB) for 3 weeks (experiment I), and a measured concentration of 20 ng L⁻¹ EE2 for 1-6 weeks (experiment II). Histological analysis was performed for the testis, and microarray analyses were performed for the testis, liver and brain. Microarray analysis in the estrogen-exposed medaka liver showed vitellogenin and choriogenin as estrogen responsive genes. Testis-ova were induced in the testis after 4 weeks of exposure to 100 ng L⁻¹ EE2, 3 weeks of exposure to 800 ng EB, and 6 weeks of exposure to 20 ng L⁻¹ EE2. Microarray analysis of estrogen-exposed testes revealed up-regulation of genes related to zona pellucida (ZP) and the oocytes marker gene, 42Sp50. Using quantitative RT-PCR we confirmed that Zpc5 gene can be used as a marker for the detection of testis-ova in male medaka.     

Evaluating the fish safety level of river water and wastewater with a larval medaka assay

A larval medaka (Oryzias latipes) assay was proposed to evaluate the fish safety level of river waters and wastewaters. Organic toxicants were 10-100 times concentrated with adsorption cartridges from 4 l of river water or 1-10 times concentrated from 400 ml of wastewater. Toxicity of these concentrated solutions was determined by exposing 48-72 h post-hatch age larvae for 48 h. The method effectively revealed a variation of the median lethal concentration ratio (LCR50) from 13 to >100 in 125 river water samples, and from <1 to >10 in five typical wastewater samples. Ayase River, which takes water mostly from agricultural or household discharge, showed significantly (P<0.001) lower LCR50 than Sagami River that takes natural water as the source. Safety Levels in both Sagami River and Ayase River were influenced by the irrigation activity, LCR50 at some sites showing a seasonal-specific decrease in winter. Pollution from pulp and paper industries contributed to the low LCR50 in several tributaries of Ayase River. Required little manpower in sampling, pretreatment and testing, the proposed larval medaka assay was proved as an efficient tool for screening those high risk sites for priority management.     

Effect of Tinospora cordifolia on the reduction of ultraviolet radiation‐induced cytotoxicity and DNA damage in PC12 cells

The safety of Tinospora cordifolia and its potential to protect against ultraviolet radiation‐induced cytotoxicity and DNA damage in PC12 cells were investigated. To evaluate the safety of T. cordifolia, cell viability and agarose gel electrophoresis were carried out using PC12 cells treated with 0 to 100 μg mL^?1 of methanol extract of T. cordifolia. T. cordifolia extracts did not show cytotoxicity ranging 0 to 100 μg mL^?1. In addition, T. cordifolia extracts significantly increased cell viability at 1 ng, 10 ng and 1 μg mL^?1 concentrations in serum‐deprived medium compared to control. To confirm the protective role against UV‐induced damage, PC12 cells alone or in the presence of 10 ng, 100 ng, or 1 μg mL^?1 of T. cordifolia extract were exposed to 250, 270 and 290 nm of UV radiation, which corresponded to doses of 120, 150 and 300 mJ cm^?2, respectively. Treatment with T. cordifolia extracts significantly increased the cell survival rate irradiated at 290 nm. In addition, T. cordifolia extracts significantly reduced cyclobutane pyrimidine dimer formation induced by UV irradiation at all wavelengths. In conclusion, T. cordifolia is not toxic and safe for cells. Our findings can support its application as phototherapy in the medical sector.     

Organic pollutants and their correlation with stable isotopes in vegetation from King George Island, Antarctica

Vegetation samples from King George Island, Antarctica (62°05'S, 058°23'W) were collected in the austral summer of 2004-2005. Lichens (Usnea aurantiaco-atra and Usnea antarctica), mosses (Sanionia uncinata, Syntrichia princeps and Brachytecium sp.), and one angiosperm (Colobanthus quitensis) species were analyzed for persistent organic pollutants as well as δ(13)C and δ(15)N stable isotopes. The following contaminants were found above the method detection limit (MDL): HCB (0.141-1.06 ng g(-1) dry weight), HCHs (相似文献   

Behavior and prediction of photochemical degradation of chlorinated polycyclic aromatic hydrocarbons in cyclohexane

The photochemical degradation of 11 chlorinated polycyclic aromatic hydrocarbons (ClPAHs) and the corresponding 5 parent PAHs was examined to simulate the compound’s fate on aerosol surfaces. All the ClPAHs and PAHs decayed according to the first-order reaction rate kinetics. The photolysis rates of ClPAHs varied greatly according to the skeleton of PAHs; the rates of chlorophenanthrenes (ClPhes) and 1-chloropyrene were higher than those of corresponding parent PAHs, whereas chlorofluoranthenes, 7-chlorobenz[a]anthracene and 6-chlorobenzo[a]pyrene were more stable under irradiation compared to respective parent PAH. Considering the photoproducts of ClPhes detected, the oxidation could occur immediately at positions of the highest frontier electron density. Finally, the quantitative structure-property relationship models were developed for direct photolysis half-lives and average quantum yields of the ClPAHs and parent PAHs, in which the significant factors affecting photolysis were E_LUMO+1, total energy and surface area, and E_LUMO, E_LUMO − E_HOMO and total energy, respectively.     

Designing a purification process for chromium-, copper- and arsenic-contaminated wood

The disposal of chromated copper arsenate (CCA)-treated wood is becoming a serious problem in many countries due to increasing levels of contamination by the hazardous elements, chromium, copper and arsenic. The present experiment was conducted as a preliminary step toward one-step solvent extraction of CCA-treated wood. Because chromium, copper and arsenic have different chemical characteristics, it is best to consider them separately prior to designing a one-step extraction process. As a basis, various two-step extraction processes were first designed and tested experimentally to determine feasibility. Among these combinations, the treatment combining oxalic acid as the 1st step and a sodium oxalate solution under acidic conditions (pH 3.2) as the 2nd step was found to be an effective way of extracting CCA elements from treated wood. Extraction efficiency reached 100% for arsenic and chromium and 95.8% for copper after a 3-h sodium oxalate treatment, following a 1-h pre-extraction process with oxalic acid. On the other hand, the same combination under alkaline conditions (pH 11.2) during the 2nd step was ineffective for copper removal, indicating that pH plays an important role in complexation with sodium oxalate solution. The present results suggest that the extraction of CCA elements using a combination of oxalic acid and acidic sodium oxalate solution is a promising basis for application to a one-step extraction method.