Dissolution of mimetite Pb5(AsO4)3Cl in low-molecular-weight organic acids and EDTA

Due to its relatively low solubility, mimetite Pb₅(AsO₄)₃Cl may control Pb and As(V) solution levels at a low value in contaminated soils. The time-dependent dissolution of mimetite by low-molecular-weight organic acids (LMWOAs) such as acetic, lactic, citric, and ethylene diamine tetra-acetic acid (EDTA) was determined. At pH 3.5, the presence of citric acid or EDTA significantly increases the solubility of mimetite while acetic or lactic acids show little effect. The effect of all organic anions on the dissolution of mimetite increased with the increase in solution pH. The rate of mimetite dissolution depended on the kind and concentration of organic solvents in the sequence r_EDTA > r_lactate > r_acetate > r_citrate. Soluble Pb and As(V) released in LMWOAs and EDTA were higher than the WHO guideline value for these elements in drinking water (10 μg As(V) L⁻¹, 10 μg Pb L⁻¹). This suggests that soil organic acids in rhizosphere can potentially liberate Pb and As(V) from mimetite in contaminated soils.     

Bioremediation of chlorinated pesticide–contaminated soil using anaerobic sludges and surfactant addition

Methanogenic granular sludge and wastewater fermented sludge were used as inocula for batch tests of anaerobic bioremediation of chlorinated pesticide contaminated soil. Results obtained for both types of biomass were similar: 80 to over 90% of γ -hexachlorocyclohexane (γ-HCH), 1,1,1-trichloro-2,2-bis-(4-methoxyphenyl)ethane (methoxychlor) and 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)ethane (DDT) removed in 4–6 weeks. Residual fractions of these pesticides persisted till the end of the 16-week experiment. DDT was degraded through 1,1-dichloro-2,2-bis-(4-chlorophenyl)ethane (DDD). Accumulation of this product corresponded stoichiometrically only to 34–53% of removed DDT, supposedly due to its further transformations, finally resulting in formation of detected 4,4′-dichlorobenzophenone (DBP). Addition of 0.5 mM Tween 80 nonionic surfactant resulted in about a twofold decrease of γ -HCH and methoxychlor residual concentrations, as well as considerably lower DDD accumulation (7–29%) and higher DBP production. However, 1.25 mM dose of this surfactant applied together with granular sludge brought DDD levels back to that observed for treatments with the sludge alone, also impairing DBP formation.     

On experimental setup in bioelectromagnetics

Bioeffects created by electromagnetic field (EMF) are the subject of intensive studies. This paper critically considers estimations of exposure to EMF in bioelectromagnetic experiments. Results of calculations presented herein show the significant role of the presence of conducting bodies (the exposure system) near an object under test on EMF energy absorption as well as mutual interactions between simultaneously exposed objects. Our aims herein are twofold: firstly to find a way to refer measurement results to free-space conditions in order to enable comparison of results obtained in different laboratories, and secondly to show that EMF energy absorption in any exposed object is different and that this difference is a function of the size of the exposure system, the number of exposed objects, and the particular properties (i.e., the electromagnetic structure) of the objects. In the authors’ opinion the existence of interactions caused by the presence of the exposure system and other exposed objects is a reason why remarkable differences are observed between experiments performed even under supposedly identical conditions. The presented considerations and conclusion suggest wider participation of physicists and engineers in bioelectromagnetic experiments in order to ensure the correctness of metrological aspects of these experiments.     

Investigations into the transport and pathways of scallop larvae--the use of numerical models for managing fish stocks

The scallop fisheries off the southeast coast of Ireland have historically been considered a valuable resource for coastal communities, and hence their management is important. The scallop fishing grounds consist of a number of scallop beds dispersed throughout the St George's Channel and the southern Irish Sea. The boundaries between stocks and the interconnection in populations of adult scallops, through larval transport, is generally unknown. Until the time of this research, the stocks of scallop in this region had not been assessed. A research project was undertaken to develop novel, spatially explicit and multi-disciplinary approaches to the assessment of the scallop fisheries in the region. The project supported research in three related areas under the broad objective of developing stock assessment protocols and methods in order to promote sustainable management of these fisheries. One of these areas was the development and application of numerical models. The objectives of this modelling research were: (a) to reconstruct the physical environment of the study area; (b) investigate how this environment affects the demographics and nature of scallop; and (c) determine migration-transport pathways of the scallop larvae. From these investigations, light is shed on how the spatial variability in certain parameters of the natural environment determine habitats and the scallop populations. Also, the investigations now enable determinations to be made on the interconnectivities of 'disparate' scallop beds and where larvae are, in general, likely to be found. Thus, through the use of complex computer models, important clues are deduced that enable us to now understand key behavioural components of scallop larvae and their transport pathways. The analysis of these clues is assisting the development of protocols for managing the fish stock in a sustainable manner.     

Study of sorptive properties of trap systems for selective enrichment of volatile organic compounds from tobacco smoke samples

There is a dearth of data on the consumer product concentrations of iron, lead, and nickel for accurate comparison to be made. The levels of these elements were determined in 85 samples of six different classes of personal care products commonly used in Nigeria using atomic absorption spectrophotometry. The results of the analysis showed that the range of the mean concentrations of Fe was 0.485–1.108 ppm, Pb ND–0.163 ppm, and Ni ND-0.160 ppm. The analytical data have demonstrated that the selected consumer products are possible sources of iron, lead, and nickel exposure. Users can be exposed to these metals directly through dermal contact or inhalation. The regulations relating to cosmetic products give no limit values for heavy metals in cosmetic products, hence, it was difficult to establish if the values obtained in this study are safe or not. Prolonged use of soaps, creams, and detergent containing these elements may pose threat to human health and the environment. This could be responsible for various skin diseases such as allergic skin, follicular and pigmentary disorders, which are common among the users (exposed groups) of these products in Nigeria. A body of evidence has presented a rare example of systemic allergic dermatitis caused by topical application of a mercury-containing cosmetic to the upper lip of a 32-year-old Turkish patient.     

Ephemeral injuries, regeneration frequencies, and intensity of the injury-producing process

Organisms may suffer sublethal injuries that lead to the loss of body parts and that leave either permanent or ephemeral scars, and these can be used to understand some aspects of the injury-producing processes, such as predation. It has been shown theoretically that for injuries that leave detectable scars throughout life, proportion of injured individuals in a population reflects the probability of fatal incidents rather than the intensity of the injury-producing process itself (Schoener in Ecology 60:1110–1115, 1979). When injuries are ephemeral and leave no detectable signature, it is shown here that frequencies of injury are a function of the intensity of the injury-producing process. Moreover, if the probability of fatality from the injury-producing process is low, as would be the case for partial or cropping predation, regeneration frequencies can be used to infer the intensity of the injury-producing process if the rate of regeneration is known.     

Pollution indices as useful tools for the comprehensive evaluation of the degree of soil contamination–A review

The paper provides a complex, critical assessment of heavy metal soil pollution using different indices. Pollution indices are widely considered a useful tool for the comprehensive evaluation of the degree of contamination. Moreover, they can have a great importance in the assessment of soil quality and the prediction of future ecosystem sustainability, especially in the case of farmlands. Eighteen indices previously described by several authors (I_geo, PI, EF, C_f, PI_sum, PI_Nemerow, PLI, PI_ave, PI_Vector, PIN, MEC, CSI, MERMQ, C_deg, RI, mCd and ExF) as well as the newly published Biogeochemical Index (BGI) were compared. The content, as determined by other authors, of the most widely investigated heavy metals (Cd, Pb and Zn) in farmland, forest and urban soils was used as a database for the calculation of all of the presented indices, and this shows, based on statistical methods, the similarities and differences between them. The indices were initially divided into two groups: individual and complex. In order to achieve a more precise classification, our study attempted to further split indices based on their purpose and method of calculation. The strengths and weaknesses of each index were assessed; in addition, a comprehensive method for pollution index choice is presented, in order to best interpret pollution in different soils (farmland, forest and urban). This critical review also contains an evaluation of various geochemical backgrounds (GBs) used in heavy metal soil pollution assessments. The authors propose a comprehensive method in order to assess soil quality, based on the application of local and reference GB.