Biodegradation of poly(propylene glycol)s under the conditions of the OECD screening test

Two poly(propylene glycol)s (PPGs): PPG 425 and PPG 725 were tested under the conditions of the OECD Screening Test with activated sludge as inoculum. Tested PPG were the sole source of organic carbon in the test. Quantitative determination of the biodegradation progress was performed by the HPLC with fluorescence detection after derivatisation of PPG with naphthyl isocyanate. The liquid chromatography-mass spectrometry technique was used for identification and semiquantitative determination of metabolites. Separation of PPG and metabolites from the water matrix was performed by liquid-liquid extraction with chloroform. It was found that the shorter PPG 425 is biodegraded significantly worse than the longer PPG 725 and that biodegradation occurs without shortening of the PPG chain for both PPG. PPG molecules are oxidised to ketones and/or aldehydes during the aerobic biodegradation process.     

A study of the influence of muscle type and muscle force level on individual frequency bands of the EMG power spectrum.

The aim of this study was to analyse the electromyographic (EMG) power spectrum indicating differences in the frequency bands of the spectrum resulting from differences in muscle type and force level for the extensor digitorum (ED), palmaris longus (PL) and biceps brachii (BB) muscles. The study was performed on 12 young men as 2 tests different in terms of the type of exerted force (30, 15 and 5% MVC, maximum voluntary contraction). The parameters of the EMG power spectrum were obtained as a result of a division of the EMG power spectrum into ranges determined by border frequencies. The results suggest that (a) frequency bands contained in the 30-80 Hz range and over the frequency of 300 Hz depend on muscle force, and (b) the power spectrum in the frequency range of up to 40 Hz and 60-300 Hz indicates muscle type.     

Using gas chromatography for indoor-air quality control in conservation and renovation studios.

Investigations were carried out in the Department of Conservation of Painting and Polychrome Sculpture and in the Screen Printing Studio of the Faculty of Art at Nicolaus Copernicus University. Concentration of the vapours of organic solvents was measured in 2 workshops: the Art Conservation Studio and the Screen Printing Studio. This study attempts to evaluate the work environment in both studios by analysing the concentration of vapour solvents over 5 to 7 years of measurements. Volatile solvents--aliphatic and aromatic hydrocarbons, alcohols, esters and ketones--were detected in investigated workplaces. These compounds have a wide range of applications in cleaning and removing old varnishes, lacquers and paints; inhalation is the main route of exposure. Vapour was collected using an active sampling method.     

Mutual interactions in bioelectromagnetics

This paper discusses mutual interactions phenomena especially in the case of Transverse ElectroMagnetic (TEM) cell applications as an exposure system in technical and biomedical studies. In many publications is described problem of influence of an object upon the electromagnetic field (EMF) distribution inside a exposure system while inverse effect—influence of exposure system on tested object is overlooked. The problem plays primary role if a correlation between investigations carried out in an enclosure (e.g. TEM cell) and that in the free space is looked for.     

Putting transdisciplinarity into practice: a mixed mode procedure for stakeholder participation in natural resource management

The definition of management actions in natural resource management requires the integration of all types of knowledge involved. An appropriate approach for such a challenge is the ideal of transdisciplinarity. A transdisciplinary process can be considered “consultative” when knowledge is simply gathered and collated, or “participatory” when knowledge integration is undertaken collectively. In this paper, we present a mixed mode procedure (i.e., using interviews, questionnaires, and group discussions) that empirically demonstrates the difference between consultative and participatory transdisciplinary processes. The mixed mode procedure is used for identifying the most relevant problems occurring in the coastal system of Praia da Vitória bay, Azores, Portugal. This mixed mode procedure is likely to be useful for other studies, because the results highlight the need to promote face-to-face interaction at the earliest opportunity, and because it allows an understanding to be gained of social learning processes, the influence of power, and participant behaviour during interaction with others.     

Contamination of Polish national parks with heavy metals

The paper presents results of screening analysis of all Polish national parks (23) contamination with Cd, Cu, Pb and Zn on the basis of a three-level characteristic of heavy metal presence in Norway spruce stands: accumulation on the needle surface, concentration of heavy metals in spruce needles and concentration of bioavailable heavy metals in the soil. Based on the obtained results, the classification of forest ecosystem hazard in national parks with heavy metals was made using synthetic indicators. It was found out that Babiogórski, Magurski, Ojcowski and Gorczański National Parks, located in the southern part of the country, were the most polluted with heavy metals. It is probably due to a higher industrial activity in this part of Poland and the transboundary transport of air pollutants. A little lower level of pollution was observed in Kampinoski National Park located in the middle of the country. The concentration of heavy metals found in needles from national parks does not seem to be harmful for the health status of the trees. Statistically significant correlation between all parameters, which was found for cadmium--the most mobile of the analysed elements--shows that this metal can be proposed as a marker to reflect present effect of industrial emission on forests.     

Qualitative structure residue relationship analysis in the determination of the maximum residue limit of veterinary drugs

Aim of the present study was an attempt to find a correlation between physicochemical structure of veterinary drugs and the maximum residue limit (MRL) for muscle tissue of food producing animals. Direct correlation and analysis in quintile groups for 52 physicochemical parameters were performed. An internal validation using leave-one-out cross-validation was performed. In the quintile groups, there were 11 arithmetic expressions created for the limited group of individual parameters (13 from 52 analyzed), which showed a significant linear or quadratic correlation between the number of quintile group and the mean value of MRL within the quintile. The results obtained suggest that there is no direct correlation between individual physicochemical parameters and MRL value in muscle tissue; however, such correlation can be determined for arithmetic expressions created on the basis of several physicochemical parameters, using quintile group analysis.     

Prediction of environmental partition coefficients and the Henry's law constants for 135 congeners of chlorodibenzothiophene

Polychlorinated dibenzothiophenes (PCDTs) could be classified as persistent organic pollutants (POPs) in the environment and are particularly interesting due to their structural resemblance to highly toxic dioxins. We show here some basic environmental properties such as n-octanol water (K_OW), n-octanol/air (K_OA) and air/water (K_AW) partition coefficients as well as Henry’s law constants (K_H) for all 135 congeners of chlorodibenzothiophene. Predictions were made by regression of principal components (PCR) and with aid of a set of standard chemicals, for which physical–chemical properties are well featured. Computed K_OW, K_OA, K_AW and K_H values for mono-CDTs ranged, respectively, between 4.66 and 4.71, 7.48 and 7.55, −2.84 and −2.82, 3.56 and 3.74; for di-CDTs between 5.02 and 5.28, 8.03 and 8.29, −3.01 and −2.95, 2.42 and 2.75; for tri-CDTs between 5.53 and 5.70, 8.65 and 8.87, −3.2 and −3.11, 1.58 and 1.92; for tetra-CDTs between 5.95 and 6.13, 9.27 and 9.50, −3.39 and −3.27, 1.02 and 1.33; for penta-CDTs between 6.38 and 6.51, 9.88 and 10.05, −3.54 and −3.45, 0.72 and 0.88; for hexa-CDTs between 6.83 and 6.97, 10.54 and 10.66, −3.72 and −3.64, 0.47 and 0.56; for hepta-CDTs between 7.28 and 7.35, 11.12 and 11.20, −3.81 and −3.87, 0.33 and 0.38; for octa-CDT 7.74, 11.78, −4.04 and 0.23. An estimated value of the three types of partition coefficient and Henry’s law constants suggest that polychlorinated dibenzothiophenes are lipophilic and semi-volatile persistent organic pollutants. Their mobility in the environment seems to be very similar to that of some well-known POPs such as polychlorinated dibenzofurans, -dibenzo-p-dioxins, and -biphenyls or organochlorine pesticides.