降水量时间序列变化的小波特征

利用小波变换对降水量时间序列的多时间尺度变化及突变特征进行了探讨。小波变换不仅能将降水量时间序列的频率特征在时间域上展现出来，清晰地给出各种时间尺度的强弱和分布情况以及早涝变化趋势和突变点，而且还能分析出其主要周期。以新安江流域黄山地区主汛期(5—7月)和年降水量为例，计算表明，其年际及年代际时间尺度在时域中分布不均匀，具有明显的局部化特征；同时分析出主汛期降水具有8年、19年左右的周期，年降水存在6年、19年左右的周期；研究还表明，主汛期降水与年降水的时间尺度变化比较接近。     

紫外吸收剂在湖泊中的分布及其对底栖动物的毒性效应

紫外吸收剂大量用于工业材料和个人护理品中,近年来在水体中不断被检出,同时由于其高度亲脂性,易在底泥和水生生物体内富集,产生潜在的毒性效应,已成为一类新型污染物。本文综述了紫外吸收剂在湖泊环境中的分布和生物富集效应,重点分析了二苯甲酮类等典型紫外吸收剂对底栖动物的药物代谢系统、抗氧化系统及其生长发育的影响及其毒性作用机制,并对未来该领域的研究进行了展望。     

Quantitative health risk assessment of inhalation exposure to automobile foundry dust

With a growing awareness of environmental protection, the dust pollution caused by automobile foundry work has become a serious and urgent problem. This study aimed to explore contamination levels and health effects of automobile foundry dust. A total of 276 dust samples from six types of work in an automobile foundry factory were collected and analysed using the filter membrane method. Probabilistic risk assessment model was developed for evaluating the health risk of foundry dust on workers. The health risk and its influencing factors among workers were then assessed by applying the Monte Carlo method to identify the most significant parameters. Health damage assessment was conducted to translate health risk into disability-adjusted life year (DALY). The results revealed that the mean concentration of dust on six types of work ranged from 1.67 to 5.40 mg/m³. The highest health risks to be come from melting, cast shakeout and finishing, followed by pouring, sand preparation, moulding and core-making. The probability of the risk exceeding 10⁻⁶ was approximately 85%, 90%, 90%, 75%, 70% and 45%, respectively. The sensitivity analysis indicated that average time, exposure duration, inhalation rate and dust concentration (C) made great contribution to dust health risk. Workers exposed to cast shakeout and finishing had the largest DALY of 48.64a. These results can further help managers to fully understand the dust risks on various types of work in the automobile foundry factories and provide scientific basis for the management and decision-making related to health damage assessment.

     

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

城市垃圾渗滤液及其生物处理对策

垃圾的填埋处理产生了大量的垃圾渗滤液，必须进行处理后才能排入水体。目前主要是采用生物方法处理垃圾渗滤液。本文着重分析了垃圾渗滤液的特点，加成分复杂，水质水量变化大，金属、有权物和氨氮浓度高，微生物营养元素比例失调等，并列举实例提出了提高生物处理效果的相应对策。     

微生物絮凝剂的研究与应用进展

微生物絮凝剂是具有广阔应用前景的一种天然高分子絮凝剂，因而引起科学界的高度重视．自７０年代以来，美国和日本等十多个国家已对其进行了详细的研究．本文综述了微生物絮凝剂的研究与应用进展，包括合成絮凝剂的微生物种类、微生物絮凝剂的化学本质、遗传基础和微观结构、微生物絮凝剂的絮凝机理和絮凝能力及其影响因素，微生物絮凝剂的合成条件和提取方法等方面．文中还给出了微生物絮凝剂在污染治理等领域实际应用的若干事例．     

脉冲电晕放电等离子体烟气脱硫技术研究

通过实验模拟烟气,观察SO_2在一种特殊的脉冲电晕放电等离子体环境中的氧化变化过程,研究了烟气温度、SO_2初始浓度等参数对SO_2氧化率、单位能量氧化量的影响规律。     

袋装控释铁肥压根法矫治桃树黄叶病的效果

本文介绍了袋装控释铁肥压根法矫治桃树缺铁黄叶病的效果。该法具有大幅度增加叶绿素含量．提高果实产量,改善果实品质,降低矫治成本,安全可靠,效果好的特点。     

二氧化氯消毒前后污水毒性的变化及消毒条件的影响

采用发光细菌试验和umu试验,分别考察了二氧化氯投加量和反应时间对污水二氧化氯消毒后急性毒性和遗传毒性变化的影响.结果表明,随着二氧化氯消毒剂投加量的增加,消毒后水样的急性毒性不断增大,但遗传毒性逐渐减小后趋于稳定.随着反应时间的延长,二氧化氯的消耗量不断增大,消毒后水样的急性毒性先增大后减小,遗传毒性逐渐减小后趋于稳定.由于消毒条件对污水急性毒性和遗传毒性有着不同的影响,说明污水中产生急性毒性和产生遗传毒性的物质不同,对于某一种污水,通过控制消毒条件可以使消毒后污水的急性毒性和遗传毒性都较低.     

催化湿式氧化处理H—酸溶液的反应动力学

两阶段一级反应动力学模型和广义动力学模型被用来描述湿式氧化（ＷＡＯ）及催化湿式氧化（ＣＷＡＯ）反应过程，并确定了动力学参数。２个模型的计算值均与实验值相符，而广义动力学模型相对现准确些。２个确定均表明反尖分２个步骤：首先是Ｈ－酸被迅速氧化成小分子有机酸，后者再缓慢氧化，这２个步骤由模型参数加以表征，因而模型可被用来对ＣＷＡＯ催化剂进行评价。