Simultaneous removal of NOx,SO2, and Hg from flue gas in FGD absorber with oxidant injection (NaClO2)– full-scale investigation

ABSTRACT

This article presents the results of an industrial-scale study (on 400 MW_e lignite fired unit) of simultaneous NO_x, SO₂, and Hg^T removal in FGD absorber with oxidant injection (NaClO₂) into flue gas. It was confirmed that the injection of sodium chlorite upstream the FGD (Flue Gas Desulfurization) absorber oxidize NO to NO₂, Hg⁰ to Hg²⁺, and enhancing NO_x and Hg^T removal efficiency from exhaust gas in FGD absorber. Mercury removal efficiency grows with the rise of degree of oxidation NO to NO₂ and was limited by the phenomenon of re-emission. For NO_x removal the most critical parameters is slurry pH and temperature. There was no negative effect on sulfur dioxide removal efficiency caused by oxidant injection in tested FGD absorber. Based on the data provided, NO_x and Hg^T emissions can be reduced by adjusting the FGD absorber operating parameters combined with oxidant injection.     

Impact assessment of climate policy on Poland's power sector

This article addresses the impact of the European Union Emissions Trading System (EU ETS) on Poland’s conventional energy sector in 2008–2020 and further till 2050. Poland is a country with over 80% dependence on coal in the power sector being under political pressure of the European Union’s (EU) ambitious climate policy. The impact of the increase of the European Emission Allowance (EUA) price on fossil fuel power sector has been modelled for different scenarios. The innovation of this article consists in proposing a methodology of estimation actual costs and benefits of power stations in a country with a heavily coal-dependent power sector in the process of transition to a low-carbon economy. Strong political and economic interdependence of coal and power sector has been demonstrated as well as the impact caused by the EU ETS participation in different technology groups of power plants. It has been shown that gas-fuelled combined heat and power units are less vulnerable to the EU ETS-related costs, whereas the hard coal-fired plants may lose their profitability soon after 2020. Lignite power plants, despite their high emissivity, may longer remain in operation owing to low operational costs. Additionally, the results of long-term, up to 2050, modelling of Poland’s energy sector supported an unavoidable need of deep decarbonisation of the power sector to meet the post-Paris climate objectives. It has been concluded that investing in coal-based power capacity may lead to a carbon lock-in of the power sector. Finally, the overall costs of such a transformation have been discussed and confronted with the financial support offered by the EU. The whole consideration has been made in a wide context of changes ongoing globally in energy markets and compared with some other countries seeking transformation paths from coal. Poland’s case can serve as a lesson for all countries trying to reduce coal dependence in power generation. Reforms in the energy sector shall from the very beginning be an essential part of a sustainable transition of the whole nation’s economy. They must scale the power capacity to the future demand avoiding stranded costs. The reforms must be wide-ranging, based on a wide political consensus and not biased against the coal sector. Future energy mix and corresponding technologies shall be carefully designed, matched and should remain stable in the long-term perspective. Coal-based power capacity being near the end of its lifetime provides an economically viable option to commence a fuel switch and the following technology replacement. Real benefits and costs of the energy transition shall be fairly allocated to all stakeholders and communicated to the society. The social costs and implications in coal-dependent regions may be high, especially in the short-term perspective, but then the transformation will bring profits to the whole society.     

Multibody model of the human upper extremity for fracture simulation

About 3.8 million people are injured in accidents at work in Europe every year. The resulting high costs are incurred by the victims themselves, their families, employers and society. We have used a numerical simulation to reconstruct accidents at work for several years. To reconstruct these accidents MADYMO R7.5 with a numerical human model (pedestrian model) is used. However, this model is dedicated to the analysis of car-to-pedestrian accidents and thus cannot be fully used for reconstructing accidents at work. Therefore, we started working on the development of a numerical model of the human body for the purpose of simulating accidents at work. Developing a new numerical model which gives an opportunity to simulate fractures of the upper extremity bones is a stage of that work.     

Identifying trophic relationships within the high Arctic benthic community: how much can fatty acids tell?

Multivariate analysis of fatty acids (FA) profiles proved to be a useful tool for demonstrating feeding preferences of Arctic invertebrates belonging to several taxonomic groups collected during summer and winter seasons in the Spitsbergen fjords (Arctic). Within phytodetrivorous taxa, the enhanced proportions of 16:1n-7, C16 polyunsaturated fatty acids (PUFA) and 20:5n-3 in crustaceans clearly reflected selective ingestion of diatoms, while high amounts of 22:6n-3 and C18 FAs found in molluscs indicated flagellate-based nutrition. High levels of C20 PUFA and 16:1n-7 together with the typical bacterial FAs were found in winter specimens of deposit-feeding polychaetes showing their reliance on highly reworked organic matter during this season. Our results suggest that 18:1n-9 may not be a reliable marker of carnivory feeding within benthic taxa. Lipid signatures of omnivores and carnivores/detrivores usually originated from a variety of dietary sources, of which few possess highly characteristic FA features. Still, elevated levels of Calanus markers (20:1 and 22:1 moieties) characterized species linked to the pelagic food chains, while 20:4n-6 proved to be a useful indicator of foraminiferan consumption. We highlight the need for a multimethod approach, since complexity of benthic food webs along with general lack of unambiguous FA trophic markers prevents tracking of trophic relationships with use of FA analysis alone. Based on their FA composition, we showed that benthic species represent a source of essential PUFA and could play a fundamental role in the Arctic food webs transferring energy derived from variable pelagic and benthic resources to upper trophic levels.     

Nickel in the muscle tissues of freshwater fish from north eastern Poland should not cause human health concerns

Excessive intake of nickel (Ni) is known to produce adverse health effects in humans, including carcinogenicity and allergenicity. The main route of exposure for humans is diet, including fish. There is, however, little information concerning Ni content in freshwater fish in Poland. The aim of the study was to determine the concentrations of Ni in meat tissues of three fish species from north eastern Poland and assess toxic potential to healthy and susceptible sub-groups of individuals. The settings for the study lakes span a range of anthropogenic influence from protected areas to a basin with a town and several villages and another one influenced by a pesticide tomb leakage. Fish were netted and kept frozen until analysis. After defrosting, the fish were filleted and minced. The ashed samples were dissolved in nitric acid and analyzed for Ni by flame atomic absorption spectrometry. Roach meat contained 6.6–23 µg kg^?1 Ni, bream 9.5–178 µg kg^?1, and carp 16.5–139 µg kg^?1. These concentrations are low, indicating that the fish were not excessively contaminated with the metal. Consuming a 250 g portion of fish would result in an average nickel intake of 4 µg for roach, <10 µg for bream, and <20 µg for carp. These values represent only 0.4–2% of the maximum level that is likely to pose a risk of adverse effects as established in the USA. Consumption of fish from the study region need not necessarily pose a health threat.     

Changes in transport accessibility as a result of flooding: a case study of the Mazovia Province (Eastern Poland)

This paper presents the results of research investigating the impact of flooding on the temporal aspect of transport accessibility at national, regional and local levels in the Mazovia Province – an administrative region in Poland. For the purposes of this study the authors measured the theoretical journey times by private transport between settlement units for two variants: journeys made under normal circumstances, that is, without a flood; and journeys made during a flood event, which would necessitate diversions to avoid flooded road sections. This allowed the theoretical journey time differences to be calculated. It was assumed that vehicles move at the highest permissible speed along routes allowing the shortest travel times. The methods of accessibility assessment employed in this paper are based on distance measurements and use isochrones and a cumulative approach. Analysis carried out by the authors has shown that for interregional, intraregional and local journeys, the flooding of a part of the Mazovia region results in changes in travel times, but their absolute and relative magnitudes vary widely. It was found that in the case of national scale journeys the majority of relative journey time increases were no greater than three times the normal duration, while on a local scale they do not exceed 75%. For areas with a high risk of flooding there should be obligatory analyses of changes in transport accessibility; this would facilitate effective flood risk management. Appropriate traffic management in crisis situations would facilitate emergency and rescue services and help inhabitants and any other persons in flooded areas.     

Mechanical and Thermal Properties of Biocomposites Based on Polyethylene from Renewable Resources Modified with Ionic Liquids

Journal of Polymers and the Environment - Biocomposites based on polyethylene from renewable resources derived from sugar cane as raw material were modified with phosphonium ionic liquids....     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Experimental Verification of the Computerized Method for Work Space Optimization in Conditions of Static Work

The aim of this study was to verify a theoretical model for upper extremity work space optimization. In order to do that, experimental studies were conducted in which two parameters of the electromyography (EMG) signal were analyzed: AMP (amplitude calculated as Root Mean Square) and SZC (coefficient of the slope of the regression line between time and Zero Crossing values). Values of forces in muscles (parameter MOD) were calculated from theoretical studies. A comparison of experimental (AMP, SZC) and theoretical (MOD) parameters was performed by analyzing the coefficient of correlation between those parameters and differentiation of muscular load according to external load value. Analysis showed that the theoretical and experimental results are in step, which means that the developed model can be used for upper extremity work space optimization.     

Analysis of Conditions and Organization of Work of Notebook Computer Users

Abstract

Aim. The aim of this study was to evaluate working conditions with a notebook computer (notebook) as a potential cause of musculoskeletal disorders. Material and methods. The study had 2 stages. The first one was a questionnaire survey among 300 notebook users. The next stage was an expert analysis of 53 randomly selected workstations. The questionnaire survey included questions about the participants, their working conditions, work organization and also duration of work with a notebook. Results and conclusions. The results of the research showed that most examined operators used a notebook as a basic working tool. The most important irregularities included an unadjustable working surface, unadjustable height of the seat pan and backrest, unadjustable height and distance between the armrests and no additional ergonomic devices (external keyboard, docking station, notebook stand or footstool).