Musculoskeletal Load Assessment of the Upper Limb Positions Subjectively Chosen as the Most Convenient

Work posture is determined by interdependence between work stand design, the necessity to perform given activities, and the anthropometric dimensions of the worker, but it also depends on individual preferences. The aim of the study was to compare the musculoskeletal load of the right upper extremity under conditions of imposed (standard) upper limb position and subjectively chosen ones, and to assess the influence of the changes in magnitude of the external force on the musculoskeletal load in the examined limb positions. Ten healthy male participants took part in the study. Muscular load associated with different upper extremity positions with and without external load were assessed. Musculoskeletal load for standard and subjectively chosen limb positions and two different values of external load were compared by means of theoretical and experimental methods. Results indicate that differences in musculoskeletal load between imposed and subjectively chosen limb positions were not high enough to show statistically significant differences, and the upper limb position chosen by the participant does not always cause the lowest musculoskeletal load.     

Management of hazardous fly-ash energy waste in the adsorptive removal of diclofenac by the use of synthetic zeolitic materials

Zeolite-carbon composites (Na-P1(C), Na-X(C)) and pure zeolites (Na-P1, Na-X) were synthesized from hazardous high-carbon fly ash waste (HC FA) via hydrothermal reaction with sodium hydroxide (NaOH). These solids were applied in the removal of diclofenac (DCF) from aqueous solution, with and without poly(acrylic acid) (PAA). The experiments included adsorption–desorption measurements, as well as electrokinetic and stability analyses. The obtained results showed that HC FA and Na-P1(C) had the greatest adsorption capacity towards DCF, i.e., 26.51 and 21.19 mg/g, respectively. PAA caused considerable decrease in the DCF adsorption due to the competition of both adsorbates of anionic character for active sites. For example, the adsorbed amount of DCF on Na-P1 without PAA was 14.11 mg/g, whereas the one measured with PAA was 5.08 mg/g. Most of prepared solids were effectively regenerated by the use of NaOH. Desorption degree reached even 73.65% in the single systems (with one adsorbate) and 97.24% in the mixed ones (with two adsorbates). Zeolitic materials formed suspensions of rather low stability, which underwent further deterioration in the organic molecules presence. All the results obtained in this study indicated that HC FA can be successfully managed in the removal of organic substances.

     

Changes in the liver proteome in apoE knockout mice exposed to inhalation of silica nanoparticles indicate mitochondrial damage and impairment of ER stress responses associated with microvesicular steatosis

Environmental Science and Pollution Research - The adverse effects of air pollution on the cardiovascular system have been well documented. Nonalcoholic fatty liver disease (NAFLD) is an...     

An approach to cleaner production: from hair burning to hair saving using a lime-free unhairing system

One of the methods to decrease the pollution of tanneries' wastewater is hair saving unhairing of hides. An investigation of proteolytic activity of enzymatic preparation (EP) has shown that some EPs have high stability in strong alkaline solutions and can be used for the hair saving process.Based on this investigation, a new hair saving unhairing method using a system containing EP, sodium hydroxide, sodium sulphide, and disodium hydrophosphate was developed. The method results in a high quality pelt suitable for leather manufacturing, decreases the pollution caused by sodium sulphide and the other products of hair degradation and avoids the pollution caused by calcium compounds.     

Ozone recovery as seen in perspective of the Dobson spectrophotometer measurements at Belsk (52°N, 21°E) in the period 1963–2008

The total ozone monthly means derived from measurements by the Dobson spectrophotometer at Belsk (52°N, 21°E) and satellite observations over central and midlatitudinal Europe are analyzed for the long-term changes between 1995 and 2008. Standard explanatory variables representing physical and chemical processes known to influence the ozone distribution are considered. The potential proxies are: atmospheric loading by the ozone depleting substances characterized by the equivalent effective stratospheric chlorine (EESC) time series, various drivers of ozone dynamical variability including solar cycle, teleconnection patterns, temperature at 50 hPa, and pressure at the tropopause level. The multivariate adaptive regression splines (MARS) methodology is used to find optimal set of the explanatory variables and shape of the anthropogenic trend curve. Following options for the trend curve are examined: proportional to EESC, piecewise linear (with the turning points in 1980 and 1995), and selected from a smooth curve fit to the total ozone time series having “natural variations” removed. Statistical estimates and their uncertainties are calculated using block bootstrapping. The analyses indicate that ozone over Belsk, in central Europe, and in midlatitudinal Europe reaches at least first stage of recovery as defined by the World Meteorological Organization: a statistically significant reduction in the rate of decline. Model using the EESC time series as a proxy for the anthropogenic trend pattern yields even the second stage, i.e., a positive trend in time series that remains after removal dynamical signal from the analyzed data. Substantial seasonal dependent long-term ozone oscillations by the dynamical drivers are revealed causing estimation of the ozone recovery time even more uncertain.     

Fate of PBDEs during food processing: Assessment of formation of mixed chlorinated/brominated diphenyl ethers and brominated dioxins/furans

The aim of this study was to evaluate effects of food processing on PBDE levels, in particular influence of heat treatment on degradation of PBDEs, including possible formation of chlorinated diphenyl ethers or brominated dioxins/furans as degradation products. It was shown that PBDEs heated in the presence of chlorine (from either organic or inorganic sources) formed mixed chlorinated/brominated diphenyl ethers. However, no PCDEs were formed in the presence of lipids. Lipid medium increased stability of PBDEs exposed to UV irradiation. Profile of congeners formed in result of the debromination reaction was significantly different than profiles observed by some other authors in aliphatic organic solvents. Grilling processes increased concentrations (calculated on the fresh product basis) of the studied compounds by 4–8/22–34% for electric/coal grill, respectively. Depending on the congener and on the applied heat treatment, PBDE mass in pork meat after grilling dropped by 26–53%. No detectable quantities of either brominated dioxins or furans were formed during thermal processing of food containing typical levels of PBDEs.     

The effect of bed properties on methane removal in an aerated biofilter--model studies

The capacity of laboratory-scale aerated biofilters to oxidize methane was investigated. Four types of organic and mineral-organic materials were flushed with a mixture of CH₄, CO₂ and air (1:1:8 by volume) during a six-month period. The filter bed materials were as follows: (1) municipal waste compost, (2) an organic horticultural substrate, (3) a composite of expanded perlite and compost amended with zeolite, and (4) the same mixture of perlite and compost amended with bentonite. Methanotrophic capacity during the six months of the experiment reached maximum values of between 889 and 1036 g m⁻² d⁻¹. Batch incubation tests were carried out in order to determine the influence of methane and oxygen concentrations, as well as the addition of sewage sludge, on methanotrophic activity. Michaelis constants K_M for CH₄ and O₂ were 4.6-14.9%, and 0.7-12.3%, respectively. Maximum methanotrophic activities V_max were between 1.3 and 11.6 cm³ g⁻¹ d⁻¹. The activity significantly increased when sewage sludge was added. The main conclusion is that the type of filter bed material (differing significantly in organic matter content, water-holding capacity, or gas diffusion coefficient) was not an important factor in determining methanotrophic capacity when oxygen was supplied to the biofilter.     

Phytoplankton-nutrient relationships in years with various water levels in the Pasłęka River in the vicinity of the hydroelectric power station (North-east Poland)

Relationships between abundance of basic net phytoplankton taxonomic groups (cyanobacteria, diatoms, and chlorophytes) and nutrient concentrations in water were studied on the Pas??ka River in years with varied water levels. In high water level conditions, large amounts of orthophosphates and total nitrogen from the catchment could favor development of cyanobacteria and chlorophytes. The species could be allochthonic. At low water levels, the factor stimulating phytoplankton development could be nutrients coming from mineralization of accumulated organic matter. The highest nutrient concentrations could favor diatom development. In such conditions, dominant taxa were autochthonic. In terms of numbers, F. capucina was dominant, and in terms of biomass—genus Spirogyra sp. It could come from plant periphyton inhabiting the concrete drops of the dam included in the river’s development in the vicinity of the hydroelectric power station.