考虑岩石抗拉强度受围压影响的地层破裂压模型

预测地层破裂压力是地下流体注入工程中的关键问题，关系到工程的稳定性和安全性。根据地测资料，岩石的抗拉强度会随着围压产生变化，然而目前常见的地层破裂压预测模型均未考虑该因素。基于厚壁圆筒法，针对2种砂岩开展不同围压条件下的砂岩致裂试验，根据试验数据，计算各组试验中试样的抗拉强度，并拟合围压与岩石抗拉强度的关系函数。研究岩石抗拉强度随围压变化的规律，提出能在实际地层中表征该规律的参数，基于该参数对现有的地层破裂压模型进行修正，并结合实测数据验证修正模型的可靠性。研究结果表明:岩石的抗拉强度随着围压的增加呈现明显的线性正相关关系，低围压下，新模型的预测结果与实测数据较为接近。随着围压增加，二者的差异逐渐增大，说明选取的特征参数在低围压下能较好地描述抗拉强度受围压的影响效应，而高围压下参数的取值需进一步研究。     

土壤中7种重金属和砷测定的精密度控制指标研究

通过对浙江省近700组实际土壤样品进行分析,研究了土壤中铜、铅、锌、铬、镍、镉、砷、汞7种重金属和砷测定的精密度控制指标(实验室内相对偏差和实验室间相对偏差),并与行业标准分析方法和文献进行了比较,旨在为环境监测质量控制与质量保证工作提供参考。经统计分析,建议实验室内相对偏差控制指标如下:铜,≤15%;铅,≤15%;锌,≤15%;铬,≤15%;镍,≤15%;镉,≤20%;砷,≤15%;汞,≤50%。建议实验室间相对偏差控制指标如下:铜,≤25%;铅,≤25%;锌,≤20%;铬,≤20%;镍,≤25%;镉,≤35%;砷,≤25%;汞,≤55%。     

基于GOCI数据的太湖叶绿素a浓度反演和蓝藻水华遥感监测

太湖蓝藻水华是广为关注的环境问题,迫切需要实现蓝藻水华的动态监测。利用静止轨道海洋水色遥感器(GOCI)遥感数据构建了太湖叶绿素a反演的三波段模型,使用归一化植被覆盖指数(NDVI)进行蓝藻水华监测,并进行了富营养化评价。结果表明:(1)三波段模型优于波段比值模型,可以用于GOCI遥感数据反演太湖叶绿素a浓度。(2)2019年6月3日太湖叶绿素a大致呈湖心和西部浓度低,北部和西南沿岸浓度高的空间分布;从10:15至15:15,叶绿素a浓度先升高后降低。(3)竺山湖和椒山周边水域水华聚集情况较为严重,是当天重度水华的主要发生区域;水华的时间变化规律同叶绿素a浓度变化规律一致。(4)对2019年4月和6月的GOCI遥感数据进行富营养化评价发现,太湖富营养化水平总体呈西部高东部低、北部高南部低、边缘高中间低的趋势;6月较4月富营养化水平明显加剧。     

Eulerian and Lagrangian time scales of the turbulence above staggered arrays of cubical obstacles

Environmental Fluid Mechanics - We present results from water-channel experiments on neutrally-stable turbulent flows over staggered arrays of cubical obstacles modelling idealised urban canopies....     

平原河网地区非点源污染风险差异化分区防控研究

土地利用优化和空间防控策略对非点源污染风险控制及水环境质量的改善具有重要意义。本文以太湖流域典型平原河网地区-上海市青浦区为研究对象,将灰色线性规划模型与最小累积阻力模型相结合,以控制非点源污染风险和增加经济效益、生态效益为目标,进行土地利用结构优化与空间分区防控研究,在空间上划设了水资源保育区、水资源重点防护区、非点源污染一般阻控区、非点源污染中等阻控区及非点源污染重点阻控区,并针对不同分区提出具有针对性的防控措施。与2012年相比,预测2020年优化防控方案下,可减少总氮、总磷的输出10.96%和41.33%。由此表明,优化土地利用结构和构建空间差异化防控机制是有效调控非点源污染风险,实现区域可持续土地利用,促进经济发展和保证生态环境安全的有效途径。     

Co-treatment of fruit and vegetable waste in sludge digesters. An analysis of the relationship among bio-methane generation,process stability and digestate phytotoxicity

The co-digestion of a variable amount of fruit and vegetable waste in a waste mixed sludge digester was investigated using a pilot scale apparatus. The organic loading rate (OLR) was increased from 1.46 kg VS/m³ day to 2.8 kg VS/m³ day. The hydraulic retention time was reduced from 14 days to about 10 days. Specific bio-methane production increased from about 90 NL/kg VS to the maximum value of about 430 NL/kg VS when OLR was increased from 1.46 kg VS/m³ day to 2.1 kg VS/m³ day. A higher OLR caused an excessive reduction in the hydraulic retention time, enhancing microorganism wash out. Process stability evaluated by the total volatile fatty acids concentration (mg/l) to the alkalinity buffer capacity (eq. mg/l CaCO₃) ratio (i.e. FOS/TAC) criterion was <0.1 indicating high stability for OLR <2.46 kg VS/m³ day. For higher OLR, FOS/TAC increased rapidly. Residual phytotoxicty of the digestate evaluated by the germination index (GI) (%) was quite constant for OLR < 2.46 kg VS/m³ day, which is lower than the 60% limit, indicating an acceptable toxicity level for crops. For OLR > 2.46 kg VS/m³ day, GI decreased rapidly. This corresponding trend between FOS/TAC and GI was further investigated by the definition of the GI ratio (GIR) parameter. Comparison between GIR and FOS/TAC suggests that GI could be a suitable criterion for evaluating process stability.     

口服纳米银对大鼠的生物有效性及其体内分布的研究

由于独特的抗菌特性，纳米银(AgNP)在诸多领域得到广泛应用，但是其生物有效性、动物组织分布及排出尚不清楚。将聚乙烯吡咯烷酮包被的AgNP溶液按照10 mg kg^-1给雌性SD大鼠灌胃，采用ICP-MS检测SD大鼠组织、粪便及尿液中总银浓度。实验结果表明，AgNP通过小肠吸收后，可以通过血液循环快速分布在肝、肾、脾、肺、脑等靶器官。灌胃后1 h，大鼠各组织中总银浓度达到最大值(肝、肾、脾、肺、脑中银浓度分别为0.29 ± 0.13 mg kg^-1、0.23 ± 0.04 mg kg^-1、0.17 ± 0.05 mg kg^-1、0.11 ± 0.01 mg kg^-1、0.06 ±0.02 mg kg^-1)，之后银浓度随时间降低直至和对照组无显著性差异。在灌胃途径下，AgNP对SD大鼠的有效性为8.5%，且73%的AgNP是通过粪便的途径排出体外。     

Assessment of urban sustainability efficiency based on general data envelopment analysis: a case study of two cities in western and eastern China

Sustainable urban development focuses on enhancing urban well-being, while also balancing the demands of urban social and economic development, natural resource consumption, and environmental pollution. This work used general data envelopment analysis to assess the urban sustainability efficiency (USE) and sustainability potential (SP) in Lanzhou and Xiamen, two cities that are characteristic of urban areas in western and eastern China. The assessment indicator system included important natural and urban welfare factors as input and output indices, respectively. The results showed that overall urban sustainability efficiency increased in Lanzhou and Xiamen from 1985 to 2010, but that the sustainability of natural resources clearly decreased. The urban sustainability efficiency of Xiamen was higher than that of Lanzhou, and the sustainability potential of Xiamen was lower than that of Lanzhou; this indicates that Xiamen performed better in terms of urban sustainable development. The urban sustainability efficiency in Xiamen has increased with increasing urban population, and the rate and scale of economic development have been higher than in Lanzhou. The assessment and analysis performed in this study show that cities with different natural resources and development characteristics have different forms, patterns, and trajectories of sustainable development.     

Direct measurements of the drag force over aligned arrays of cubes exposed to boundary-layer flows

Wind tunnel measurements of the total drag force for aligned arrays of cubes exposed to two different boundary-layer flows at three flow velocities are discussed. The drag force for eight different building packing densities λ _p (from 0.028 to 1) is measured with a standard load cell generating a novel dataset. Different λ _p are reproduced by increasing the number of buildings on the same lot area; this represents a real situation that an urban planner is faced with when a lot area of a given (fixed) size is allocated to the development of new built areas. It is assumed that the surrounding terrain is uniform and there is a transition from a given roughness (smooth) to a new roughness (rough). The approaching flow will adjust itself over the new surface within a distance that in general may be larger than the horizontal length covered by the array. We investigate the region where the flow adjustment occurs. The wide range of packing densities allowed us to analyse in detail the evolution of the drag force. The drag force increases with increasing packing densities until it reaches a maximum at an intermediate packing density (λ _p  = 0.25 in our case) followed by a slight decrease at larger packing densities. The value of the drag force depends on the flow adjustment along the array which is evaluated by introducing the parameter “drag area” to retrieve information about the drag distribution at different λ _p . Results clearly suggest a change of the distribution of the drag force, which is found to be relatively uniform at low packing densities, while most of the force acts on first rows of the arrays at large packing densities. The drag area constitutes the basis for the formulation of a new adjustment length scale defined as the ratio between the volume of the air within the array and the drag area. The proposed adjustment length scale automatically takes into account the change in drag distribution along the array for a better parameterization of urban effects in dispersion models.