A simultaneous optimization approach for the design of wastewater and heat exchange networks based on cost estimation

A new systematic methodology for designing wastewater and heat exchange networks for process industries involving effluent streams containing multiple contaminants is proposed. A simultaneous optimization approach mathematically combines the problems of wastewater and heat exchanger network optimization into a single step. This process includes two global iterations of a similar two-stage approach and optimizes networks for water and heat exchange simultaneously based on cost estimation. The objective function is to minimize the total annual cost of the wastewater and heat exchange network design which is subject to the mass and energy balance constraints on all the pertinent flows and to constraints related to the concentrations of contaminants. The proposed method employs a strategy to address a mixed integer non-linear programming (MINLP) formulation. Cost estimates for optimized wastewater and heat exchange networks for an oil refinery process are generated, illustrating the effectiveness of the proposed methodology.     

Local population size in a flightless insect: importance of patch structure-dependent mortality

In spatially heterogeneous systems, utilizing population models to integrate the effects of multiple population rates can yield powerful insights into the relative importance of the component rates. The relative importance of demographic rates and dispersal in shaping the distribution of the western tussock moth (Orgyia vetusta) among patches of its host plant was explored using stage-structured population models. Tussock moth dispersal occurs passively in first-instar larvae and is poor or absent in all other life stages. Spatial surveys suggested, however, that moth distribution is not well explained by passive dispersal; moth populations were greater on small patches and on isolated ones. Further analysis showed that several local demographic rates varied significantly with patch characteristics. Two mortality factors in particular may explain the observed patterns. First, crawler mortality both increased with patch size and was density-dependent. A single-patch difference equation model showed mortality related to patch size is strong enough to overcome the homogenizing effect of density dependence; greater equilibrium densities were predicted for smaller patches. Second, although three rates were found to vary with local patch density, only pupal parasitism by a chalcid wasp could potentially account for higher moth abundances on isolated patches. A spatially explicit simulation model of the multiple-patch system showed that spatial variation in pupal parasitism is indeed strong enough to generate such a pattern. These results demonstrate that habitat spatial structure can affect multiple population processes simultaneously, and even relatively low attack rates imposed on a reproductively valuable life stage of the host can have a dominant effect on population distribution among habitat patches.     

A numerical simulation model of cyclic hardening behavior of AC4C-T6 for LNG cargo pump using finite element analysis

This paper is concerned with the evaluation of cyclic hardening models within the stress–strain behavior of aluminum alloy AC4C-T6 that can be used to LNG cargo pump operating in cryogenic temperature. To insure the strength assessment of LNG cargo pump, material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 is investigated through FEA (Finite Element Analysis) with various hardening options including linear and non-linear hardening, isotropic and kinematic hardening, and combined hardening model. Monotonic tensile and cyclic tensile experiments for AC4C-T6 alloy were performed at room temperature and temperature of ?165 °C. Parameters of each hardening model are obtained from the experimental data; thus five hardening models are numerically simulated thereafter. Appropriate hardening models which describe the cyclic stress–strain relationship are investigated through the simulations of cyclic hardening behavior by FEA. In order to verify the predicted behavior of cyclic hardening obtained by FEA, the results of FEA and those measured by experiments are compared.     

Assessment of lead uptake in reptilian prey species

As part of an investigation determining the trophically available fraction of metals in a model terrestrial food web, i.e., invertebrate prey to Western fence lizards (Sceloporus occidentalis), we evaluated the ability of several invertebrate prey to bioaccumulate lead and to form metals-rich granules, which are hypothesized to be non-available to predators. Crickets (Acheta domestica), tenebroid beetle larvae (Tenebrio molitor), and isopods (Porcellio scaber) were selected as model prey organisms. Lack of standard exposure methodologies for these species has presented a barrier to trophic transfer evaluations, as each species has particular requirements that create challenges for designing exposure conditions. We were able to devise exposure conditions for all three species that allow long-term exposure studies. All prey organisms accumulated lead from contaminated food, and for all species the majority of the accumulated Pb was associated with the exoskeleton (>50%), with metals-rich granules accounting for most of the remaining accumulated lead.     

A study on torrefaction characteristics of waste sawdust in an auger type pyrolyzer

Torrefaction is thermo-chemical process which can improve solid fuel quality as well as grindability. In previous studies, torrefaction has been studied mainly for removal of moisture and for improving grindability. In this experiment, the characteristics of torrefied waste sawdust were studied especially for its energy yield. Hence, torrefaction was performed on varying reaction temperatures (200, 220, 240, 260, 280, 300 °C) and solid residence time (10, 30, 60 min). The results indicated that the yield of torrefaction decreases with increasing temperature and residence time. It was found that above 280 °C, the yield got remarkably decreased. The lowest yield was obtained at the residence time of 60 min. It was also noticed that the HHV of torrefied samples increases with increasing temperature. The highest HHV was found to be 26.09 MJ/kg which was obtained at 60 min and 300 °C. However, the highest energy yield was obtained to be 104.17 % which was noticed at 30 min and 260 °C.     

The role of local governments before and during chemical accidents,focusing on changes in hazardous chemical management systems

ABSTRACT

Disaster management spans actions before, during, and after disaster events. Changes in the roles and functions of local governments before a disaster can influence other stages of disaster management. After a chemical spill in 2012, South Korean hazardous chemical management tasks were returned to the central government and local governments’ roles and functions were reduced. To identify associated issues and enhance the hazardous chemical management system, this study analyzed changes in laws and policies and conducted interviews with stakeholders. While the changes helped with centralization, reinforcement, and specification, some loopholes were discovered. The information and human resource capacities of local governments and intra – and intergovernmental relations issues have hindered their active participation before and during chemical disasters. These loopholes can be addressed through institutional enhancements for local governments, such as including them in monitoring hazardous chemical handling facilities, developing codes articulating the division of tasks among departments within them, and providing adequate incentives for them to increase their personnel. This study provides empirical data that informs ongoing debates about the centralization and devolution of disaster management by linking local governments’ ordinary management systems to their disaster management activities.     

SIMULATION OF SEDIMENT AND PLANT NUTRIENT LOSSES BY THE CREAMS WATER QUALITY MODEL1

ABSTRACT: CREAMS was applied to a field-sized watershed planted to cotton in the Limestone Valley region of northern Alabama. The field was cultivated for three years with conventional tillage (CvT) followed by three years of conservation tillage (CsT). CREAMS is composed of three components: hydrology, erosion, and chemistry. Surface runoff and losses of sediment, N and P were simulated and results were compared with the observed data from the watershed. Curve numbers recommended in the CREAMS user's guide were not adequate for the watershed conditions. The hydrology submodel improved runoff simulation from CvT and CsT when field-data based curve numbers were used. The erosion submodel demonstrated that CsT reduced sediment loss more than CvT, even though CsT had higher runoff than CvT. The nutrient submodel based on the simulated runoff and sediment underpredicted N loss for both CvT and CsT. This submodel, however, accurately predicted P loss for CvT, but underpredicted for CsT (50 percent lower than the observed). The results of CREAMS simulation generally matched the observed order of magnitude for higher runoff, lower sediment, and higher N and P losses from CsT than from CvT.     

Biomineralization-based conversion of carbon dioxide to calcium carbonate using recombinant carbonic anhydrase

Recently, as a mimic of the natural biomineralization process, the use of carbonic anhydrase (CA), which is an enzyme catalyzing fast reversible hydration of carbon dioxide to bicarbonate, has been suggested for biological conversion of CO₂ to valuable chemicals. While purified bovine CA (BCA) has been used in previous studies, its practical utilization in CO₂ conversion has been limited due to the expense of BCA preparation. In the present work, we investigated conversion of CO₂ into calcium carbonate as a target carbonate mineral by using a more economical, recombinant CA. To our knowledge, this is the first report of the usage of recombinant CA for biological CO₂ conversion. Recombinant α-type CA originating in Neisseria gonorrhoeae (NCA) was highly expressed as a soluble form in Escherichia coli. We found that purified recombinant NCA which showed comparable CO₂ hydration activity to commercial BCA significantly promoted formation of solid CaCO₃ through the acceleration of CO₂ hydration rate, which is naturally slow. In addition, the rate of calcite crystal formation was also accelerated using recombinant NCA. Moreover, non-purified crude recombinant NCA also showed relatively significant ability. Therefore, recombinant CA could be an effective, economical biocatalyst in practical CO₂ conversion system.     

Development of functional composts using spent coffee grounds,poultry manure and biochar through microbial bioaugmentation

Spent coffee grounds (SCG), poultry manure, and agricultural waste-derived biochar were used to manufacture functional composts through microbial bioaugmentation. The highest yield of tomato stalk-based biochar (40.7%) was obtained at 450°C with a surface area of 2.35 m² g^?1. Four pilot-scale composting reactors were established to perform composting for 45 days. The ratios of NH₄⁺–N/NO₃^?–N, which served as an indicator of compost maturity, indicate rapid, and successful composting via microbial bioaugmentation and biochar amendment. Moreover, germination indices for radish also increased by 14–34% through augmentation and biochar amendment. Microbial diversity was also enhanced in the augmented and biochar-amended composts by 7.1–8.9%, where two species of Sphingobacteriaceae were dominant (29–43%). The scavenging activities of 2,2-diphenyl-1-picrylhydrazyl (DPPH) were enhanced by 14.1% and 8.6% in the fruits of pepper plants grown in the presence of the TR-2 (augmentation applied only) and TR-3 (both augmentation and biochar amendment applied) composts, respectively. Total phenolic content was also enhanced by 68% in the fruits of the crops grown in TR-3. Moreover, the other compost, TR-L (augmentation applied only), boosted DPPH scavenging activity by 111% in leeks compared with commercial organic fertilizer, while TR-3 increased the phenolic content by 44.8%. Composting facilitated by microbial augmentation and biochar amendment shortened the composting time and enhanced the quality of the functional compost. These results indicate that functional compost has great potential to compete with commercially available organic fertilizers and that the novel composting technology could significantly contribute to the eco-friendly recycling of organic wastes such as spent coffee grounds, poultry manure, and agricultural wastes.