Evaluation of environmentally friendly lubricant for aluminum cold forging using friction test based on spline extrusion

It is required to replace the aluminum fluoride coating, which is a popular lubricant for aluminum alloy cold forging in Japan, with environmentally friendly lubricants, because the aluminum fluoride coating has high environmental risks and needs much expense. Evaluations of lubrication performance are necessary before lubricant replacement. The authors proposed new friction test based on combined forward spline-backward can extrusion. It can realize large surface expansion, which is a characteristic of aluminum cold forging. In the present paper, a double-layer-type environmentally friendly solid lubricant film and the aluminum fluoride coating were applied to a precipitation hardened aluminum alloy. The lubrication performance was evaluated by the friction test. The double-layer-type lubricant showed superior performance enough for the replacement. The effect of surface treatment applied to workpiece on the lubrication performance was also investigated. The surface asperity generated by a wet-blasting showed high pickup resistance and low friction.     

Studies on automated survey system of environmental chemicals by gas chromatography-mass spectrometry-computer III. Construction of an automated survey system and its application

An automated survey system on the chemicals in environments by a gas chromatography-mass spectrometry-computer system has been constructed of Three Dimensional Mass Chromatography, Modified Probability Based Matching method, and Self Training Interpretive and Retrieval method. And it was applied to analyze environmental materials, with interesting results.     

Sonochemical degradation of 2,3,7,8-tetrachlorodibenzo-p-dioxins in aqueous solution with Fe(III)/UV system

2,3,7,8-Tetrachlorodibenzo-p-dioxin (2,3,7,8-TeCDD) was rapidly decreased by sonication in aqueous solution. The degradation efficiency was strongly influenced by ultrasonic power and reaction temperature. An initial 2,3,7,8-TeCDD concentration of 20 ng l(-1) was completely degraded within 60 min under sonochemical conditions using a 20 kHz frequency with a 150 W ultrasound power. The activation energy is 21.9 kJ/mol in the temperature range of 10-40 degrees C, suggesting a diffusion-controlled reaction. To increase the efficiency of 2,3,7,8-TeCDD treatment, degradation system combined ultrasound with Fe(III) (2 x 10(-4)mol l(-1)) and UV irradiation. Both UV and Fe(III) induced Fenton, Fenton-like and photo-Fenton reactions, leading to additional OH radicals and rapid 2,3,7,8-TeCDD removal.     

Studies on automated survey system of environmental chemicals by gas chromatography-mass spectrometry-computer I. Retrieval system of mass spectra

A retrieval system of mass spectra based upon the Probability Based Matching method was studied in order to apply it to survey the chemicals in environments by a gas chromatography-mass spectrometry-computer system. As retrieval indices, peak missing probability and relative confidence value were proposed.     

The influence of forest fires on CO, HCN, C2H6, and C2H2 over northern Japan measured by infrared solar spectroscopy

Total column abundances of CO, HCN, C₂H₆, and C₂H₂ have been retrieved from infrared solar spectra observed at Moshiri (44.4°N) and Rikubetsu (43.5°N) in northern Japan from 1997 to 2005. The spectra were recorded with high spectral resolution ground-based Fourier transform infrared (FTIR) spectrometers and total column abundances were calculated by SFIT1 version 1.09e. Deviations of these species relative to their seasonal mean values (ΔCO, ΔHCN, ΔC₂H₆, and ΔC₂H₂) were derived, which showed short-time enhancements in 1998, 2002, and 2003. Good correlations among ΔCO, ΔHCN, ΔC₂H₆, and ΔC₂H₂ in a few months of each year were seen. Since the number of forest fires in Siberia had large enhancements in 1998, 2002, and 2003, trajectory analyses were performed in order to assess the influence of forest fires and it was confirmed that air masses passing over the location of burning points in Siberia reached Moshiri and Rikubetsu. This paper shows that enhancements of these species were driven by biomass burning in Siberia.     

External and internal carbonic anhydrases in Dunaliella species

Four species of Dunaliella and a carbonic anhydrase deficient mutant of Dunaliella tertiolecta (Butcher), HL 25/8, developed a process for concentrating dissolved inorganic carbon when adapted on air or low CO₂ for 24 h in the light. However, the external carbonic anhydrase activities in Dunaliella species were nil or low compared with those in Chlamydomonas reinhardtii (Danegard) or some Chlorella species. D. tertiolecta had low and about equal levels of external and internal carbonic anhydrase. D. parva (Lerche) and the D. tertiolecta mutant had negligible external carbonic anhydrase. D. viridis (Teodoresco) and D. salina (Teodoresco), high salt tolerant species, had high activities of intenal carbonic anhydrase but low levels of external carbonic anhydrase. Antiserum prepared against the 37 kDa peptide of extracellular carbonic anhydrase from Chlamydomonas reinhardtii was immunoreactive with a polypeptide of 30 kDa in D. tertiolecta and its salt sensitive external carbonic anhydrase (CA) mutant HL 25/8. External CA activity from D. tertiolecta was stimulated about three-fold, by including 0.5 M NaCl in the assay medium, while internal CA was not significantly affected by NaCl. External CA activities in the other species were insensitive to NaCl, while their internal activities were 90% inhibited by 0.5 M NaCl. Sorbitol only partly replaced NaCl in stimulating the external CA from D. tertiolecta. These experiments were performed with Dunaliella spp. grown in controlled laboratory cultures during September through November 1989.     

Determination of an acceptable assimilable organic carbon (AOC) level for biological stability in water distribution systems with minimized chlorine residual

There is considerable interest in minimizing the chlorine residual in Japan because of increasing complaints about a chlorinous odor in drinking water. However, minimizing the chlorine residual causes the microbiological water quality to deteriorate, and stricter control of biodegradable organics in finished water is thus needed to maintain biological stability during water distribution. In this investigation, an acceptable level of assimilable organic carbon (AOC) for biologically stable water with minimized chlorine residual was determined based on the relationship between AOC, the chlorine residual, and bacterial regrowth. In order to prepare water samples containing lower AOC, the fractions of AOC and biodegradable organic matter (BOM) in tap water samples were reduced by converting into biomass after thermal hydrolysis of BOM at alkaline conditions. The batch-mode incubations at different conditions of AOC and chlorine residual were carried out at 20°C, and the presence or absence of bacterial regrowth was determined. The determined curve for biologically stable water indicated that the acceptable AOC was 10.9 μg C/L at a minimized chlorine residual (0.05 mg Cl₂/L). This result indicated that AOC removal during current water treatment processes in Japan should be significantly enhanced prior to minimization of the chlorine residual in water distribution.     

Experimental study on CO2 monitoring and quantification of stored CO2 in saline formations using resistivity measurements

This paper reports CO₂ saturation estimations based on resistivity data obtained from laboratory measurements and induction logging results at the Nagaoka pilot CO₂ injection site. The laboratory experiments put in evidence that the presence of clay content tends to reduce the increase of resistivity caused by the displacement of brine by less conductive CO₂. As a result, CO₂ saturations estimated from resistivity measurements without any correction for the clay effect are considerably lower than the actual saturations. The resistivity index (RI) provides better estimates of CO₂ saturations than the Archie's equation because it requires the determination or assumption of only one rock parameter: the saturation exponent. CO₂ saturations estimated from the induction logging data acquired at Nagaoka are considerably lower than the neutron porosity changes due to displacement between brine and CO₂ in the reservoir. Even in the case of considering the De Witte's equation and the Poupon's to account for the clay effect, it was still difficult to get a good agreement with the neutron logging results. New relations based on the resistivity index with correction factors for the clay effect are developed and implemented in this study. One of these relations has proved to be effective to estimate CO₂ saturations in saline formations with high clay content.     

Biogeochemical properties and potential risk of shallow arsenic-rich sediment layers to groundwater quality in Western Bangladesh

Environmental Geochemistry and Health - The arsenic-contaminated groundwater has attracted attention in much south and southeast Asian deltas, however, mainly on the deep aquifers. Here, arsenic...     

The generative power of metaphor: long‐term action research on disaster recovery in a small Japanese village

Disaster recovery is a dynamic process of creating, maintaining, and changing the meaningful context of survivors. It is completed when they redevelop their self‐reliance and resume managing their social relations with a sense of community. This study employed action research to examine how researchers and survivors collaborated to change disaster recovery through the generative power of metaphor in a small village in Japan that experienced the Niigata–Chuetsu earthquake on 23 October 2004. It outlines long‐term collaborative practices as survivors undertook new activities owing to the power of the metaphor of ‘school’. Once ‘school’ was adopted as the metaphor for where survivors learnt new skills and passed on traditional knowledge, they created new metaphors and performed new activities independently, which is critical for recovery as it demonstrates self‐reliance. The paper assesses the reasons why generative metaphors worked effectively in this case and highlights some academic and practical implications for disaster recovery.