警用热防护材料的应用研究和发展概况

热防护装备是警察面对火灾和高温时保存生存力和提高战斗力的必备装备,因此研究热防护材料的性能和防护机理显得尤为重要。本文分析了在警用领域热防护材料的研究现状,讨论了热防护材料的性能与表征方法,最后对新型热防护材料气凝胶的发展现状进行了介绍。     

Organic oxalate as leachant and precipitant for the recovery of valuable metals from spent lithium-ion batteries

Spent lithium-ion batteries containing lots of strategic resources such as cobalt and lithium are considered as an attractive secondary resource. In this work, an environmentally compatible process based on vacuum pyrolysis, oxalate leaching and precipitation is applied to recover cobalt and lithium from spent lithium-ion batteries. Oxalate is introduced as leaching reagent meanwhile as precipitant which leaches and precipitates cobalt from LiCoO(2) and CoO directly as CoC(2)O(4)·2H(2)O with 1.0 M oxalate solution at 80°C and solid/liquid ratio of 50 g L(-1) for 120 min. The reaction efficiency of more than 98% of LiCoO(2) can be achieved and cobalt and lithium can also be separated efficiently during the hydrometallurgical process. The combined process is simple and adequate for the recovery of valuable metals from spent lithium-ion batteries.     

丙烯酸柱撑类水滑石的制备及其对Cu2+的吸附性能

以Zn-Al-NO3--类水滑石为前体,采用返混沉淀法制备了丙烯酸柱撑类水滑石,将其用于吸附废水中的Cu2+.实验结果表明:当初始Cu2+质量浓度为80 mg/L、丙烯酸柱撑类水滑石加入量为40 g/L、废水pH为6、吸附时间为2.0 h时,丙烯酸柱撑类水滑石对Cu2+有较好的吸附效果,在此条件下废水中Cu2+的吸附率高达95.31％;丙烯酸柱撑类水滑石对Cu2+的吸附符合Freundlich等温吸附模型.     

基于高压共轨柴油发动机的SCR处理系统

柴油发动机的排气后处理技术是柴油发动机技术发展的核心。SCR处理系统是当前柴油机排气后处理技术之一,它能有效地去除柴油机排气中的NOx。将SCR处理系统与共轨柴油发动机结合并合理匹配,可满足更高排放标准的要求。     

生活垃圾卫生填埋场填埋库区分期设计实例

提出山谷型生活垃圾卫生填埋场填埋库区采取分期设计的原则,以福建省连城县生活垃圾卫生填埋场为例,说明填埋库区采取分期设计后能有效地减少垃圾渗滤液的产生量,从而达到减少工程投资、加快工程进度、减少初期运行费用的目的。     

复杂地形大气扩散模式在环境影响评价中的应用

基于HJ2.2-2008《环境影响评价技术导则-大气环境》对复杂地形大气扩散模式的规定,对比研究AERMOD、CALPUFF、ADMS模式在流场模拟、地形处理思路和浓度预测方法等方面的异同,系统地提出了复杂地形条件下大气环境影响评价的技术要点,结合案例分析三模式预测的区域最大落地浓度及分布的差异,进一步探讨复杂地形大气环境影响评价存在的问题及解决方案,对做好大气环境影响评价工作具有重要的指导意义。     

挤压过程数字模拟的双重网格技术

双重网格技术是将有限元计算用网格与材料质点网格分开,通过两层网格的信息传递,可将有限元网格上的位移、速率、应变速率映射到材料质点网格上去.采用这种方法,避免了大变形中需多次重新生成网格的问题,大大缩短了上机时间,同时还能直观反映各质点从变形开始到变形结束时的位移.     

Effect of inoculating flower stalks and vegetable waste with ligno-cellulolytic microorganisms on the composting process

A lab-scale composting experiment was carried out using vegetable and flower stalks waste to study the effectiveness of ligno-cellulolytic microorganisms (LCMs) obtained from the previous isolation on composting process, especially on enhancement of biodegradation rate of these organic materials. The addition of LCMs to compost showed promised to be a valuable asset by rendering timely benefits in efficiency, maturity, and quality of the composting. This was evidenced by a significant increase of temperature, O2 consumption and CO2 emission, and population density of LCMs in compost mass compared with that of biotic (addition of culture of horse feces) and abiotic (1% molasses amendment) treatments, as well as control trial. The phytotoxicity assay showed that the substrate became mature after 60 days' composting. The LCMs inoculation enhanced the biodegradation of the composting materials as evidenced by an increasing screening ratio (1.2 cm sieve pore) of 34.5% in the treated trail, compared with that of control, which elucidated that big advantage of adding selected inoculants over other treatment, and screening ratio is a reasonable index to compare the quality of different compost. However, the inoculation seemed to have no significant effect on the moisture content, pH, and the final organic carbon of the composting materials.     

离心式除水器脱水性能的正交法实验

将正交实验法用于湿式烟气脱硫装置离心式除水器脱水性能实验中，通过对实验数据的方差分析，确定了除水器各结构参数对脱水性能影响的显著水平及最佳结构参数，实现了除水器的优化设计。