高硫高铁土壤全硫提取和测定方法的改进

硫酸钡分光光度比浊法是大批量测定土壤环境样品硫含量的常用方法,但影响测定结果的因素较多,如稳定剂的选择、酸度的控制、BaCl：的形态和用量等均可对测定结果产生影响。在多金属硫化物矿区,由于长期的采矿冶炼活动,造成周边土壤中硫、铁含量增加,用比浊法测定硫含量时,铁的含量也对测定结果产生显著影响。针对这些影响因素,本研究在用硝酸．高氯酸湿法对土壤进行消解后,优化了硫酸钡分光光度比浊法测定高硫高铁样品的实验条件和实验步骤,并对多金属硫化物矿区的土壤样品进行了测定,得到了较好的结果。实验证明,称取0．50g土壤样品,消解后过滤,取滤液7mL,加入1mL研（1＋2）甘油．乙醇]=6％的甘油．乙醇为稳定剂,1mL浓磷酸掩蔽Fe3＋与cl-反应所显的黄色,定容到10mL,加入w（BaCl2）=10％的氯化钡溶液10mL,电磁搅拌1min,静置20-40min,在波长440nm处,比浊法测定土壤全硫含量,相对误差〈10％,取得良好的测定结果。此方法简单、快捷、方便,适合大批量环境样品的测定。     

广东采石场的特点及复绿方法选用

通过对广东省采石场的调查,阐述了采石场高、陡、缺土、缺水、生境恶劣等特点.提出了采石场复绿点、线、面种植复绿的三大类方法,并对各种方法所对应的坡面地质条件作出了论述.同时提出了复绿的各种配套措施,包括给排水、植物配置、种植土配制等.     

绿色生产力:一个亚洲可持续发展的手段

绿色生产力的概念是由亚洲生产力组织(APO)提出的.绿色生产力是一种提高生产率和环境性能的战略.它的目的是要确保社会-经济的均衡发展,使得人类生活质量能够可持续性改善.在提高获利性和竞争优势的同时,运用适当的生产力与环境管理手段、技术和工艺,能够降低团体活动、产品和服务所造成的环境影响.利益相关者群体(包括政府、工业界和学术界)提出了改革建议,就是希望能够得到更大的可持续能力.     

Seasonal change of persistent organic pollutant concentrations in air at Niigata area,Japan

The concentrations of persistent organic pollutants (POPs), such as HCB, alpha-, beta-, gamma- and delta-HCH, trans- and cis-chlordane (t-CHL, c-CHL), DDE, DDD and DDT, in ambient air have been measured at five sampling points in Niigata area, Japan (Niigata, Maki, Tsubame, Jouzo and Yahiko) during the period from September 1999 to November 2001. HCB, alpha-HCH, t-CHL and c-CHL showed higher concentrations than the other chemicals in all locations. All the POPs except t-CHL and c-CHL collected at urban sites of the Niigata Plain was almost the same in their concentration levels. Higher concentrations of t-CHL and c-CHL in residential areas should be attributed to the past usage of the chemical as a termiticide. At Yahiko (remote site), most of the POPs showed lower concentrations than those measured at the other sampling sites, although alpha-HCH and gamma-HCH were comparable with the concentrations found at the other sampling sites. All POPs except alpha-HCH and gamma-HCH tend to decrease 41-80% in their concentrations from 2000 to 2001. The lower POPs concentrations in winter and the higher POPs concentrations in summer at every sampling point can be partly explained by temperature differences. Applying the equation of the logarithm of the POP partial pressure in air versus reciprocal temperature (lnPa=m/T+b) to our data, linear relations were observed. HCB gave a poor linearity and the smallest slope, while beta-HCH, t-CHL and c-CHL gave good linearities and large slopes in the equation. The results suggest that HCB level is influenced by not only the emission from terrestrial sources but the global-scale background pollution. A peculiar observation is that beta-HCH concentration measured in our study showed large temperature dependence, indicating there could be a source of contamination in the surrounding areas.     

330/220kV电磁环网解环前后暂态稳定特性分析

为保证宁夏电网 330/220 kV 电磁环网解环后电网的安全稳定运行,运用电力系统分析综合程序(Power System Analysis Software Package,PSASP),对电磁环网解环前后电网在三级稳定标准涉及的各种故障形式下进行暂态稳定计算,对比分析解环前后系统电压与频率波动以及功角阻尼比的变化。计算结果表明:330/220kV 电磁环网解环对于宁夏电网的暂态稳定特性影响不大,解环后不会增加暂态失稳事故风险,解环条件一旦具备,应该及时实施解环。     

Characterization and environmental implications of nano- and larger TiO(2) particles in sewage sludge, and soils amended with sewage sludge

Titanium dioxide (TiO(2)) is the most extensively used engineered nanoparticle to date, yet its fate in the soil environment has been investigated only rarely and is poorly understood. In the present study, we conducted two field-scale investigations to better describe TiO(2) nano- and larger particles in their most likely route of entry into the environment, i.e., the application of biosolids to soils. We particularly concentrated on the particles in the nano-size regime due to their novel and commercially useful properties. First, we analyzed three sewage sludge products from the US EPA TNSSS sampling inventory for the occurrence, qualitative abundance, and nature of TiO(2) nano- and larger particles by using analytical scanning electron microscopy and analytical (scanning) transmission electron microscopy. Nano- and larger particles of TiO(2) were repeatedly identified across the sewage sludge types tested, providing strong evidence of their likely concentration in sewage sludge products. The TiO(2) particles identified were as small as 40 nm, and as large as 300 nm, having faceted shapes with the rutile crystal structure, and they typically formed small, loosely packed aggregates. Second, we examined surface soils in mesocosms that had been amended with Ag nanoparticle-spiked biosolids for the occurrence of TiO(2) particles. An aggregate of TiO(2) nanoparticles with the rutile structure was again identified, but this time TiO(2) nanoparticles were found to contain Ag on their surfaces. This suggests that TiO(2) nanoparticles from biosolids can interact with toxic trace metals that would then enter the environment as a soil amendment. Therefore, the long-term behavior of TiO(2) nano- and larger particles in sewage sludge materials as well as their impacts in the soil environment need to be carefully considered.     

Isolation and identification of new vasodilative substances in diesel exhaust particles

Background, aim, and scope  

We recently developed a new isolation method for diesel exhaust particles (DEP), involving successive extraction with H₂O, sodium bicarbonate, and sodium hydroxide, in which the sodium hydroxide extract was found to consist of phenolic components. Analysis of the extract revealed that vasodilative-active nitrophenols are in DEP in significantly higher concentrations than those estimated by an earlier method involving a combination of solvent extraction and repeated chromatography. These findings indicated that our new procedure offers a simple, efficient, and reliable method for the isolation and identification of bioactive substances in DEP. This encouraged us to extend our work toward investigating new vasodilatory substances in the sodium bicarbonate extract.     

The stability of butyltin compounds in a dredged heavily-contaminated sediment

A treatment process for marine sediment heavily contaminated with tributyltin (TBT) was designed that included dehydrating, sunlight drying and dumping processes. The time course in butyltin (BTs) compounds, TBT, dibutyltin (DBT) and monobutyltin concentrations were investigated in the sediment treated under various conditions (light (UV, sunlight and light exclusion), moisture (air-drying and water saturation) and wetting and drying cycles). Significant changes in all the BT compound concentrations with time were not found regardless of the sediment conditions for light and moisture. The results indicated the high stabilities of TBT and DBT in the sediments versus light and moisture condition changes, probably taking place in the treatment process. It is also estimated that the BTs in the sediment are resistant to photo-degradation and biochemical degradation and their half lives are relatively long. In contrast, the decreases in the TBT and DBT were observed during the wetting and drying cycle treatment for the water saturated sediment both during exposure to sunlight and under a dark condition. This result suggested the hypothesis that the TBT degradation could be accelerated by the high microbial activity induced by the moisture changing treatments.     

Evaluation of uncertainties originating from the different modeling approaches applied to analyze regional groundwater flow in the Tono area of Japan

Qualitative evaluation of the effects of uncertainties originating from scenario development, modeling approaches, and parameter values is an important subject in the area of safety assessment for high-level nuclear waste disposal sites. In this study, regional-scale groundwater flow analyses for the Tono area, Japan were conducted using three continuous models designed to handle heterogeneous porous media. We evaluated the simulation results to quantitatively analyze uncertainties originating from modeling approaches. We found that porous media heterogeneity is the main factor which causes uncertainties. We also found that uncertainties originating from modeling approaches greatly depend on the types of hydrological structures and heterogeneity of hydraulic conductivity values in the domain assigned by modelers. Uncertainties originating from modeling approaches decrease as the amount of labor and time spent increase, and iterations between investigation and analyses increases.