Bio-Based Plastic Based on Ozonated Cassava Starch Produced by Extrusion

Journal of Polymers and the Environment - Green methods of modification, such as ozone, can bring new functionalities to starch. In this study, starch-based plastics were produced by extrusion,...     

PET-modified red mud as catalysts for oxidative desulfurization reactions

This work describes the synthesis of catalysts based on red mud/polyethylene terephthalate(PET) composites and their subsequent heat treatment under N2 atmosphere.The materials were characterized by scanning electron microscopy(SEM),temperature programmed reduction(TPR),Fourier transform infrared spectroscopy(FT–IR),X-ray diffraction(XRD),thermogravimetric(TG) analysis and N2adsorption/desorption.The catalysts were evaluated in the oxidative desulfurization reaction of dibenzothiophene(DBT) in a biphasic system.The results indicated that the PET impregnation on red mud increased the affinity of the catalyst with the nonpolar phase(fuel),in which the contaminant was dissolved,allowing a higher conversion(up to 80%) and selectivity to the corresponding dibenzothiophene sulfone.The sulfone compound is more polar than DBT and diffused into the polar solvent as indicated by the data obtained via gas chromatography–mass spectrometry(GC–MS).     

The G20 emission projections to 2030 improved since the Paris Agreement,but only slightly

Mitigation and Adaptation Strategies for Global Change - Climate adaptation is seen by many as increasingly important and as deeply political, leading some to argue for its democratization. Social...     

Estimation of the critical effect level for pollution prevention based on oyster embryonic development toxicity test: the search for reliability

In spite of the consideration that toxicity testing is a reduced approach to measure the effects of pollutants on ecosystems, the early-life-stage (ELS) tests have evident ecological relevance because they reflect the possible reproductive impairment of the natural populations. The procedure and validation of Crassostrea rhizophorae embryonic development test have shown that it meets the same precision as other U.S. EPA tests, where EC(50) is generally used as a toxicological endpoint. However, the recognition that EC(50) is not the best endpoint to assess contaminant effects led U.S. EPA to recently suggest EC(25) as an alternative to estimate xenobiotic effects for pollution prevention. To provide reliability to the toxicological test results on C. rhizophorae embryos, the present work aimed to establish the critical effect level for this test organism, based on its reaction to reference toxicants, by using the statistical method proposed by Norberg-King (Inhibition Concentration, version 2.0). Oyster embryos were exposed to graded series of reference toxicants (ZnSO(4) x 7H(2)O; AgNO(3); KCl; CdCl(2)H(2)O; phenol, 4-chlorophenol and dodecyl sodium sulphate). Based on the obtained results, the critical value for C. rhizophorae embryonic development test was estimated as EC(15). The present research enhances the emerging consensus that ELS tests data would be adequate for estimating the chronic safe concentrations of pollutants in the receiving waters. Based on recommended criteria and on the results of the present research, zinc sulphate and 4-chlorophenol have been pointed out, among the inorganic and organic compounds tested, as the best reference toxicants for C. rhizophorae ELS-test.     

Poly(Ethylene Glycol) as a Compatibilizer for Poly(Lactic Acid)/Thermoplastic Starch Blends

A new route to prepare poly(lactic acid) (PLA)/thermoplastic starch (TPS) blends is described in this work using poly(ethylene glycol) (PEG), a non-toxic polymer, as a compatibilizer. The influence of PEG on the morphology and properties of PLA/TPS blends was studied. The blends were processed using a twin-screw micro-compounder and a micro-injector. The morphologies were analyzed by scanning and transmission electron microscopies and the material properties were evaluated by dynamic-mechanical, differential scanning calorimetry, thermogravimetric analysis and mechanical tests. PLA/TPS blends presented large TPS phase size distribution and low adhesion between phases which was responsible for the lower elastic modulus of this blend when compared to pure PLA. The addition of PEG resulted in the increase of PLA crystallization, due to its plasticizing effect, and improvement of the interfacial interaction between TPS and PLA matrix. Results show that incorporation of PEG increased the impact strength of the ternary blend and that the elastic modulus remained similar to the PLA/TPS blend.     

Investigating the potential of functionalized MCM-41 on adsorption of Remazol Red dye

The modification of MCM-41 was performed with 3-aminopropropyltrimethoxysilane. The structural order and textural properties of the synthesized materials were studied by X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetry/differential thermogravimetry, nitrogen adsorption, and desorption analysis. The adsorption capacity of NH₂-MCM-41 was studied with Remazol Red dye. The following parameters were studied in the adsorption process: pH, temperature, adsorbent dosage, and initial concentration. The desorption process was studied in different concentrations of NaOH solutions. The Freundlich isotherm model was found to be fit with the equilibrium isotherm data. Kinetics of adsorption follows the modified Avrami rate equation. The maximum adsorption capacity was estimated to be 45.9 mg?g^?1, with removal of the dye of 99.1 %. The NH₂-MCM-41 material exhibited high desorption capacity with 98.1 %.     

Association between micronuclei frequency in pollen mother cells of Tradescantia and mortality due to cancer and cardiovascular diseases: A preliminary study in Sao José dos Campos, Brazil

The present study was designed to explore the correlation between the frequency of micronuclei in Trad-MN, measured across 28 biomonitoring stations during the period comprised between 11 of May and 2 of October, 2006, and adjusted mortality rates due to cardiovascular, respiratory diseases and cancer in Sao José dos Campos, Brazil, an area with different sources of air pollution. For controlling purposes, mortality rate due to gastrointestinal diseases (an event less prone to be affected by air pollution) was also considered in the analysis. Spatial distribution of micronuclei frequency was determined using average interpolation. The association between health estimators and micronuclei frequency was determined by measures of Pearson's correlation. Higher frequencies of micronuclei were detected in areas with high traffic and close to a petrochemical pole. Significant associations were detected between micronuclei frequency and adjusted mortality rate due to cardiovascular diseases (r = 0.841, p = 0.036) and cancer (r = 0.890, p = 0.018). The association between mortality due to chronic obstructive pulmonary diseases was positive but did not reach statistical significance (r = 0.640, p = 0.172), probably because of the small number of events. Gastrointestinal mortality did not exhibit significant association with micronuclei frequency. Because the small number of observations and the nature of an ecological study, the present findings must be considered with caution and considered as preliminary. Further studies, performed in different conditions of contamination and climate should be done before considering Trad-MN in the evaluation of human health risk imposed by air pollutants.     

Marine debris contamination along undeveloped tropical beaches from northeast Brazil

We hypothesize that floating debris leaving polluted coastal bays accumulate on nearby pristine beaches. We examined composition, quantities and distribution of marine debris along approximately 150 km of relatively undeveloped, tropical beaches in Costa do Dendê (Bahia, Brazil). The study site is located south of Salvador City, the largest urban settlement from NE Brazil. Strong spatial variations were observed. Plastics accounted for 76% of the sampled items, followed by styrofoam (14%). Small plastic fragments resultant from the breakdown of larger items are ubiquitous all over the area. Because the dominant littoral drift in Bahia is southward, average beach debris densities (9.1 items/m) along Costa do Dendê were threefold higher than densities previously observed north of Salvador City. River-dominated and stable beaches had higher debris quantities than unstable, erosional beaches. Areas immediately south of the major regional embayments (Camamu and Todos os Santos) were the preferential accumulation sites, indicating that rivers draining populous areas are the major source of debris to the study site. Our results provide baseline information for future assessments. Management actions should focus on input prevention at the hydrographic basin level rather than on cleaning services on beaches.