Does information of predators influence general wariness?

Antipredator behavior includes several qualitatively distinct activities, but few studies have determined the degree to which these activities are independent. If behaviors are not independent, then the nature of the relationship would illustrate potential performance constraints. We studied crimson rosellas (Platycercus elegans) and first focused on acoustic predator discrimination. We measured time allocation before and after playback of one of three experimental treatments (peregrine falcons—Falco peregrinus, wedge-tailed eagles—Aquila audax, and crimson rosellas) to determine whether or not rosellas discriminated predators from non-predators, and specifically whether or not they discriminated large from small predators. We then focused on the decision to flee. We experimentally approached subjects and measured the distance at which they oriented to us (alert distance) and the distance at which they fled (flight initiation distance; FID). We found that rosellas could distinguish among predators; however, there was no effect on general wariness as measured by FID. These two processes of antipredator behavior may, thus, be independent.     

A botanical importance rating system for estuaries

In many semi-arid areas, estuaries are threatened because of freshwater impoundment. Estuaries are important sites for ecological diversity and, increasingly, for recreation. A system has been developed which rates estuaries according to their botanical importance. A formula allows a single numerical importance score to be calculated. The area cover of each estuarine plant community type (i.e. intertidal salt marsh, submerged macrophytes, reed/sedge swamps and supratidal salt marsh) and its importance in the estuary forms the basis of the score. The ‘ecological condition’ of the plant community and the community richness within the estuary are incorporated into the formula. The formula is effective in determining the botanical importance of estuaries. Further methods to determine the zoological, physical and socio-economic importance of estuaries need to be developed to allow the overall importance of estuaries to be determined.     

Uncertainties in the role of land vegetation in the carbon cycle

Since the late 1950s the CO2 concentration of the atmosphere has been increasing by around 0.5-3 ppm per year. Understanding of carbon sinks is vital to understanding this trend and its future behaviour. Here we examine some of the factors which may affect the proportion of anthropogenic CO2 ending up in the atmosphere in the present and in the future, and variability in the CO2 increase from one year to another. We also examine the evidence for the potential of terrestrial ecosystem carbon sinks to take up or release CO2. In some cases, a careful re-examination of the research methods used to deduce present and future feedbacks may be necessary. The most advanced technology and the most complex models do not necessarily produce reliable results. They should be carefully checked against a general background knowledge of ecological processes before their results are accepted.     

The effect of the oil dispersant Omni-Clean on the toxicity of fuel oil no. 2 in two bioassays with the sheepshead minnow Cyprinodon variegatus

Bioassays (7-day early life stage and 96 h acute bioassays) were conducted with the sheepshead minnow, Cyprinodon variegatus, to determine the toxicity of the dispersant Omni-Clean by itself and in combination with fuel oil no. 2. Performance characteristics of both bioassay types were also compared. Bioassays used oil by itself, dispersant by itself, and oil and dispersant in various ratios. Omni-Clean was less toxic than many other dispersants, and had a relatively small effect on individual biomass. Toxicities of the oil/dispersant combinations were generally higher than expected from the toxicities of the oil and dispersant by themselves, indicating a more-than-additive effect on toxicity. The comparison of performance characteristics between the 7-day and the 96-hour bioassays showed that the early life stage test is generally more sensitive, and has the added advantage of an additional and sensitive endpoint (fish biomass).     

Urban stormwater quality control analysis with detention ponds.

This paper presents methodologies for the development of stormwater quality control measures based on the derived probability distribution approach. These stormwater control measures, such as the fraction of pollutant removed from storage facilities, are closed-form analytical models and can be effectively used to evaluate pollutant loads to receiving waters. In this study, a simple form of rainfall-runoff transformation with lumped parameters is first extended to take into account the spatial variations in model parameters. Second, the infiltration process is further incorporated to the rainfall-runoff transformation. This study demonstrates that analytical models can be developed with various levels of complexity based on different hydrologic considerations. The performance of the analytical models is evaluated in a case study, and the results indicate that, with an appropriately formulated rainfall-runoff transformation, analytical stormwater runoff models are capable of providing comparable results to continuous simulation models in the evaluation of the long-term performance of storage facilities.     

Generation pattern of sulfur containing gases from anaerobically digested sludge cakes.

Eleven dewatered sludge cakes collected from anaerobic digesters at different treatment plants were evaluated for the amount, type, and pattern of odorous gas production. All but one of the sludge cakes were from mesophilic anaerobic digesters. One was from a thermophilic digester. The pattern and quantities of sulfur gases were found to be unique for each of the samples with regard to the products produced, magnitude, and subsequent decline. The main odor-causing chemicals were volatile sulfur compounds, which included hydrogen sulfide, methanethiol, and dimethyl sulfide. Volatile sulfur compound production peaked in 3 to 8 days and then declined. The decline was a result of conversion of organic sulfur compounds to sulfide. In one side-by-side test, a high-solids centrifuge cake generated more odorous compounds than the low-solids centrifuge cake. The data show that anaerobic digestion does not eliminate the odor potential of anaerobically digested dewatered cakes.     

Simultaneous removal of ammonia and N-nitrosamine precursors from high ammonia water by zeolite and powdered activated carbon

When adding sufficient chlorine to achieve breakpoint chlorination to source water containing high concentration of ammonia during drinking water treatment, high concentrations of disinfection by-products(DBPs) may form. If N-nitrosamine precursors are present, highly toxic N-nitrosamines, primarily N-nitrosodimethylamine(NDMA), may also form. Removing their precursors before disinfection should be a more effective way to minimize these DBPs formation. In this study, zeolites and activated carbon were examined for ammonia and N-nitrosamine precursor removal when incorporated into drinking water treatment processes.The test results indicate that Mordenite zeolite can remove ammonia and five of seven N-nitrosamine precursors efficiently by single step adsorption test. The practical applicability was evaluated by simulation of typical drinking water treatment processes using six-gang stirring system. The Mordenite zeolite was applied at the steps of lime softening, alum coagulation, and alum coagulation with powdered activated carbon(PAC) sorption. While the lime softening process resulted in poor zeolite performance, alum coagulation did not impact ammonia and N-nitrosamine precursor removal. During alum coagulation, more than67% ammonia and 70%–100% N-nitrosamine precursors were removed by Mordenite zeolite(except 3-(dimethylaminomethyl)indole(DMAI) and 4-dimethylaminoantipyrine(DMAP)). PAC effectively removed DMAI and DMAP when added during alum coagulation. A combination of the zeolite and PAC selected efficiently removed ammonia and all tested seven N-nitrosamine precursors(dimethylamine(DMA), ethylmethylamine(EMA), diethylamine(DEA), dipropylamine(DPA), trimethylamine(TMA), DMAP, and DMAI) during the alum coagulation process.     

CeO_2/Fe_2O_3对高浓度苯酚废水微波诱导的氧化催化

对高浓度苯酚废水提出了用复合催化剂CeO2/Fe2O3进行微波诱导催化氧化的降解方法,并与单一催化剂Fe2O3的催化氧化效果进行了比较,对两者的表观反应动力学进行了分析,结果表明复合催化剂的催化效果比单一催化剂的催化效果高15%以上,其主要原因是CeO2/Fe2O3复合物具有很强的催化能力和较高的干电流变活性,有利于电子的迁移和羟基自由基·OH的形成,从而有利于苯酚的氧化降解。     

Prioritizing prevention opportunities in the Washington State construction industry, 2003-2007

Objective

This study compares construction industry groups in Washington State by injury severity and cost, and ranks industry groups according to potential for prevention.

Methods

All Washington State workers' compensation compensable claims with date of injury between 2003 and 2007 were classified into North American Industrial Classification System (NAICS) industry groups. Claims were then aggregated by injury type and industry groups were ranked according to a prevention index (PI). The PI is the average of the rank orders of the claim count and the claim incidence rate. A lower PI indicates a higher need for prevention activities. The severity rate was calculated as the number of days of time loss per 10,000 full-time equivalents (FTEs).

Results

For all injury types, construction industry groups occupy 7 of the top 15 PI ranks in Washington State. The severity rate among construction industry groups was twice that for non-construction groups for all injury types. Foundation, structure, and building exterior contractors (NAICS 2381) ranked highest in prevention potential and severity among construction industry groups for most common injury types including falls from elevation, fall on same level, struck by/against, and musculo-skeletal disorders of the neck, back, and upper extremity (WMSDs). Median claim costs by injury type were generally higher among construction industry groups.

Conclusions

The construction industry in Washington State has a high severity rate and potential for prevention. The methods used for characterizing these industry groups can be adapted for comparison within and between other industries and states.

Impact on Industry

These data can be used by industry groups and employers to identify higher cost and higher severity injury types. Knowledge about the relative frequencies and costs associated with different injury types will help employers and construction industry associations make better informed decisions about where prevention efforts are most needed and may have the greatest impact. The results of this study can also be used by industry stakeholders to cooperatively focus on high cost and high severity injuries and explore best practices, interventions, and solutions as demonstrated by efforts to prevent musculoskeletal disorders in masonry (Entzel, Albers, & Welch, 2007). Initiating construction industry groups to focus on high cost and high severity injuries may also help prevent other types of injuries.