Phosphorus removal and recovery: state of the science and challenges

Environmental Science and Pollution Research - Phosphorus is one of the main nutrients required for all life. Phosphorus as phosphate form plays an important role in different cellular processes....     

Effect of mercury and arsenic from industrial effluents on the drinking water and comparison of the water quality of polluted and non-polluted areas: a case study of Peshawar and Lower Dir

The purpose of the present study was to find out the sources of mercury and arsenic pollution of water in the industrial area of Peshawar, the capital of Khyber Pakhtunkhwa, Pakistan. Samples of effluents, mud, and water were collected from the target area (industrial area of Peshawar), the area of water supply source, and from the less polluted area, the Lower Dir district, as the control. Hg was determined by the cold vapor generation technique, while arsenic was determined using the electrothermal atomic absorption technique. Data of the water from the industrial area were compared with that of the source area, control area, as well as with the WHO and some international drinking water quality standards. The results show that some parameters, i.e., TDS, DO, pH, and hardness, were more than the permissible limits. Textile and glass industries were found to be the major sources of Hg and As pollution. Downstream dilution of these contaminants was also observed.     

Monitoring the effects of chelating agents and electrical fields on active forms of Pb and Zn in contaminated soil

The application of electrical fields and chelating agents is an innovative hybrid technology used for the decontamination of soil polluted by heavy metals. The effects of four center-oriented electrical fields and chelating agents on active fractions of lead and zinc were investigated in this pot experiment. Ethylenediaminetetraacetic acid (EDTA) as a synthetic chelator and cow manure extract (CME) and poultry manure extract (PME) as natural chelators were applied to the pots (2 g kg^?1) 30 days after the first irrigation. Two weeks later, four center-oriented electrical fields were applied in each pot (in three levels of 0, 10, and 30 V) for 1 h each day for 14 days. The soil near the cathode and anodes was collected and analyzed as cathodic and anodic soil, respectively. Results indicated that the soluble–exchangeable fraction of lead and zinc were decreased in the cathodic soil, while the carbonate-bound fractions were increased. In the anodic soil, however, the opposite result was observed. EDTA enhanced the soluble–exchangeable form of the metals in both anodic and cathodic soils. Furthermore, the amounts of carbonate-bound heavy metals were increased by the application of CME in both soils. The organic-bound fraction of the metals was increased by the application of natural chelators, while electrical fields had no significant impacts on this fraction.     

Analysis of gross alpha, gross beta activities and beryllium-7 concentrations in surface air: their variations and statistical prediction model

Measurement of gross α, gross β activities and cosmogenic beryllium-7 (⁷Be) concentrations were made both daily and weekly during the years 2001–2004 from samples of atmospheric aerosols filtered from the air at Tehran Nuclear Research Center (35 41′ N) and Zahedan (28 29′ N). Weekly aerosol samples collected with the high-volume air samplers on cellulose filters were used to determine the ⁷Be contents of samples, using a semiconductor gamma spectrometer. Airborne dust samples were collected daily on fiber glass filters and used to determine the gross β and gross α activities with automatic beta analyzer and a ZnS(Ag) counter, respectively. In this work, the concentration and meteorological data were used to determine models for gross α, gross β and ⁷Be. The air concentrations of gross β and gross α activities and ⁷Be concentrations displayed lognormal distributions during the study period. Both β and ⁷Be have maximum activity concentrations during warm mid-year months.     

Comparison of wood-dust aerosol size-distributions collected by air samplers

A method has been described previously for determining particle size distributions in the inhalable size range collected by personal samplers for wood dust. In this method, the particles collected by a sampler are removed, suspended, and re-deposited on a mixed cellulose-ester filter, and examined by optical microscopy to determine particle aerodynamic diameters. This method is particularly appropriate to wood-dust particles which are generally large and close to rectangular prisms in shape. The method was used to investigate the differences in total mass found previously in studies of side-by-side sample collection with different sampler types. Over 200 wood-dust samples were collected in three different wood-products industries, using the traditional 37 mm closed-face polystyrene/acrylonitrile cassette (CFC), the Institute of Occupational Medicine (IOM) inhalable sampler, and the Button sampler developed by the University of Cincinnati. Total mass concentration results from the samplers were found to be in approximately the same ratio as those from traditional long-term gravimetric samples, but about an order of magnitude higher. Investigation of the size distributions revealed several differences between the samplers. The wood dust particulate mass appears to be concentrated in the range 10-70 aerodynamic equivalent diameter (AED), but with a substantial mass contribution from particles larger than 100 microm AED in a significant number of samples. These ultra-large particles were found in 65% of the IOM samples, 42% of the CFC samples and 32% of the Button samples. Where present, particles of this size range dominated the total mass collected, contributing an average 53% (range 10-95%). However, significant differences were still found after removal of the ultra-large particles. In general, the IOM and CFC samplers appeared to operate in accordance with previous laboratory studies, such that they both collected similar quantities of particles at the smaller diameters, up to about 30-40 [micro sign]m AED, after which the CFC collection efficiency was reduced dramatically compared to the IOM. The Button sampler collected significantly less than the IOM at particle sizes between 10.1 and 50 microm AED. The collection efficiency of the Button sampler was significantly different from that of the CFC for particle sizes between 10.1 and 40 microm AED, and the total mass concentration given by the Button sampler was significantly less than that given by the CFC, even in the absence of ultra-large particles. The results are consistent with some relevant laboratory studies.     

Coupling of solvent-based de-emulsification dispersive liquid–liquid microextraction with high performance liquid chromatography for simultaneous simple and rapid trace monitoring of 2,4-dichlorophenoxyacetic acid and 2-methyl-4-chlorophenoxyacetic acid

A simple, rapid, and efficient sample pretreatment technique, based on solvent-based de-emulsification dispersive liquid–liquid microextraction (SD-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for simultaneous preconcentration and trace detection of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) in water and urine samples. Some parameters such as acidity of solution, the amount of salt, type, and volume of extraction solvents, type of disperser/de-emulsifier solvent, and its volume were investigated and optimized. Under optimum extraction conditions, the limits of detections (LODs) of this method for MCPA and 2,4-D were 0.2 and 0.6 μg L^?1 (based on 3S_b/m) in water and 0.4 and 1.6 μg L^?1 in urine, respectively. Furthermore, dynamic linear range of this method for MCPA and 2,4-D was 1–300 and 2–400 μg L^?1, repectively. Finally, the applicability of the proposed method was evaluated by extraction and determination of the herbicides in urine and different water samples.     

Health risks associated with heavy metals in the drinking water of Swat, northern Pakistan

The concentrations of heavy metals such as Cd, Cr, Cu, Mn, Ni, Pb and Zn were investigated in drinking water sources （surface and groundwater） collected from Swat valley, Khyber Pakhtunkhwa, Pakistan. The potential health risks of heavy metals to the local population and their possible source apportionment were also studied. Heavy metal concentrations were analysed using atomic absorption spectrometer and compared with permissible limits set by Pakistan Environmental Protection Agency and World Health Organization. The concentrations of Cd, Cr, Ni and Pb were higher than their respective permissible limits, while Cu, Mn and Zn concentrations were observed within their respective limits. Health risk indicators such as chronic daily intake （CDI） and health risk index （HRI） were calculated for adults and children separately. CDIs and HRIs of heavy metals were found in the order of Cr 〉 Mn 〉 Ni 〉 Zn 〉 Cd 〉 Cu 〉 Pb and Cd 〉 Ni 〉 Mn 〉 Cr 〉 Cu 〉 Pb 〉 Zn, respectively. HRIs of selected heavy metals in the drinking water were less than 1, indicating no health risk to the local people. Multivariate and univariate statistical analyses showed that geologic and anthropogenic activities were the possible sources of water contamination with heavy metals in the study area.     

The effect of application time of mobilising agents on growth and phytoextraction of lead by Brassica napus from a calcareous mine soil

Phytoremediation of heavy metal contaminated sites is often limited by the low-bioavailability of the contaminants. Complexing agents can help to improve this technique by enhancing heavy metal solubility. Pot experiments were conducted to determine the best time for the application of ethylene diamine tetraacetic acid (EDTA) and sheep manure extract (SME) for phytoremediation of a contaminated soil by Brassica napus. The plant was grown on a mine calcareous soil treated with increasing concentrations of EDTA or SME 30 and 10?days before sowing (T1 and T2) and 10 and 30?days after sowing (T3 and T4). Soil available Pb and lead concentrations in plant organs of Brassica napus increased with EDTA concentration. The EDTA application before seed germination significantly reduced rapeseed seedling emergence and dry weight. However, the actual amount of phytoextracted Pb by rapeseed did not decrease significantly, due to severe growth depression, at high EDTA concentrations when it had applied at a suitable time (T4). SME application after sowing increased plant dry weight and Pb concentration in the soil solution and enhanced the accumulated metal concentrations in shoots and roots. Comparing the effect of EDTA and SME on Pb phytoextraction, the study showed that SME is not more effective than EDTA. The efficiency of EDTA on Pb phytoextraction by Brassica napus depends on the time of application. The most efficient treatment for Pb phytoextraction by rapeseed was application of 2?g EDTA/kg soil at T4.     

Examination of the operator and compensator tank role in urban wastewater treatment using activated sludge method

No doubt, operator is one of the main fundaments in wastewater treatment plants. By identifying the inadequacies, the operator could be considered as an important key in treatment plant. Several methods are used for wastewater treatment that requires spending a lot of cost. However, all investments of treatment facilities are useable when the expected efficiency of the treatment plant was obtained. Using experienced operator, this goal is more easily accessible. In this research, the wastewater of an urban community contaminated with moderated, diluted and highly concentrated pollution has been treated using surface and deep aeration treatment method. Sampling of these pilots was performed during winter 2008 to summer 2009. The results indicate that all analyzed parameters were eliminated using activated sludge and surface aeration methods. However, in activated sludge and deep aeration methods in combination with suitable function of operator, more pollutants could be eliminated. Hence, existence of operator in wastewater treatment plants is the basic principle to achieve considered efficiency. Wastewater treatment system is not intelligent itself and that is the operator who can organize even an inefficient system by its continuous presence. The converse of this fact is also real. Despite the various units and appropriate design of wastewater treatment plant, without an operator, the studied process cannot be expected highly efficient. In places frequently affected by the shock of organic and hydraulic loads, the compensator tank is important to offset the wastewater treatment process. Finally, in regard to microbial parameters, existence of disinfection unit is very useful.