An attempt to develop ecotourism in an unknown area: the case of Nehbandan County,South Khorasan Province,Iran

Environment, Development and Sustainability - This study is an attempt to develop ecotourism in Nehbandan County, in the South Khorasan Province, Iran, by representing unknown areas that have...     

Differential growth,nutrition, physiology,and gene expression in Melissa officinalis mediated by zinc oxide and elemental selenium nanoparticles

Environmental Science and Pollution Research - Regarding the rapid progress in the production and consumption of nanobased products, this research considered the behavior of Melissa officinalis...     

Source apportionment of PAHs and n-alkanes in respirable particles in Tehran,Iran by wind sector and vertical profile

The vertical concentration profiles and source contributions of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes in respirable particle samples (PM₄) collected at 10, 100, 200 and 300-m altitude from the Milad Tower of Tehran, Iran during fall and winter were investigated. The average concentrations of total PAHs and total n-alkanes were 16.7 and 591 ng/m³, respectively. The positive matrix factorization (PMF) model was applied to the chemical composition and wind data to apportion the contributing sources. The five PAH source factors identified were: ‘diesel’ (56.3 % of total PAHs on average), ‘gasoline’ (15.5 %), ‘wood combustion, and incineration’ (13 %), ‘industry’ (9.2 %), and ‘road soil particle’ (6.0 %). The four n-alkane source factors identified were: ‘petrogenic’ (65 % of total n-alkanes on average), ‘mixture of petrogenic and biomass burning’ (15 %), ‘mixture of biogenic and fossil fuel’ (11.5 %), and ‘biogenic’ (8.5 %). Source contributions by wind sector were also estimated based on the wind sector factor loadings from PMF analysis. Directional dependence of sources was investigated using the conditional probability function (CPF) and directional relative strength (DRS) methods. The calm wind period was found to contribute to 4.4 % of total PAHs and 5.0 % of total n-alkanes on average. Highest average concentrations of PAHs and n-alkanes were found in the 10 and 100 m samples, reflecting the importance of contributions from local sources. Higher average concentrations in the 300 m samples compared to those in the 200 m samples may indicate contributions from long-range transport. The vertical profiles of source factors indicate the gasoline and road soil particle-associated PAHs, and the mixture from biogenic and fossil fuel source-associated n-alkanes were mostly from local emissions. The smaller average contribution of diesel-associated PAHs in the lower altitude samples also indicates that the restriction of diesel-fueled vehicle use in the central area of Tehran has been effective in reducing the PAHs concentration.     

Effects of Waste Paper Sludge on the Physico-Mechanical Properties of High Density Polyethylene/Wood Flour Composites

The objective of this work was to determine some physical and mechanical properties of the high density polyethylene (HDPE) composites reinforced with various mixtures of the paper sludge and the wood flour, and to evaluate the coupling agent performance. The waste sludge materials originating from two different sources including paper making waste water treatment sludge (PS) and ink-eliminated sludge (IES) were characterized in terms of physico-chemical properties. In the experiment, four levels of paper sludge (20, 30, 40 and 60 wt%), three levels of wood flour (20, 40 and 60 wt%), and two levels of coupling agent (MAPE) content (2 and 3 wt%) were used. The flexural properties of the composites were positively affected by the addition of the sludge. Especially, tensile modulus improved with the increase of paper sludge content. With the addition of MAPE, flexural properties improved considerably compared with control specimens (without any coupling agent). The results showed that the water absorption (WA) and thickness swelling (TS) values of the samples decreased considerably with increasing sludge content in the composite, while they increased with increasing wood flour content. It is to be noted that with incorporation of MAPE in the composite formulation, the compatibility between the wood flour and HDPE was enhanced through esterification, which reduced the WA and TS and improved the mechanical properties. Composites made with IES exhibited superior physico-mechanical properties compared with the PS filled composites. Overall results suggest that the waste paper sludge materials were capable of serving as feasible reinforcing fillers for thermoplastic polymer composites.     

Alteration of body total antioxidant capacity and thiol molecules in human chronic exposure to aluminum

The physiological role of aluminum (Al) is not yet known. Exposure to Al may cause many human disorders. The aim of this study was to explore how occupational human exposure to Al might affect the body oxidative stress. The relation between Al toxicity and oxidative stress was studied in blood samples obtained from 45 primary Al production workers, with a minimum work history of three years in the age range of 29–52 years. They were evaluated for oxidative stress biomarkers including thiobarbituric acid reactive substances (TBARS) indicator of lipid peroxidation, ferric reducing ability of plasma (FRAP) indicator of total antioxidant capacity, total thiol molecules and Al level in blood. The results showed that workers have significantly higher blood Al levels and concomitant lower blood FRAP and total thiol molecules in comparison to controls. Smokers had lower total thiol molecules than non-smokers. The subjects who had a previous history of disease had lower FRAP levels. It is concluded that Al induces oxidative stress in primary Al production workers. Supplementation of workers with antioxidants may have beneficial effects.     

Hybrid Composites from Waste Materials

Hybrid composites of thermoplastic biofiber reinforced with waste newspaper fiber (NF) and poplar wood flour (WF) were prepared. The weight ratio of the lignocellulosic materials to polymer was 30:70 (w:w). Polypropylene (PP) and maleic anhydride grafted polypropylene (MAPP) were also used as the polymer matrix and coupling agent, respectively. The mechanical properties, morphology and thermal properties were investigated. The obtained results showed that tensile and flexural modulus of the composites were significantly enhanced with addition of biofibers in both types (fiber and flour), as compared with pure PP. However, the increasing in WF content substantially reduced the tensile, flexural and impact modulus, but improved the thermal stability. This effect is explained by variations in fiber morphological properties and thermal degradation. Increasing fiber aspect ratio improved mechanical properties. The effect of fiber size on impact was minimal compared to the effects of fiber content. Scanning electron microscopy has shown that the composite, with coupling agent, promotes better fiber–matrix interaction. The largest improvement on the thermal stability of hybrid composites was achieved when WF was added more. In all cases, the degradation temperatures shifted to higher values after addition of MAPP. This work clearly showed that biofiber materials in both forms of fiber and flour could be effectively used as reinforcing elements in thermoplastic PP matrix.     

Application of ANN and ANFIS models for reconstructing missing flow data

Hydrological yearbooks, especially in developing countries, are full of gaps in flow data series. Filling missing records is needed to make feasibility studies, potential assessment, and real-time decision making. In this research project, it was tried to predict the missing data of gauging stations using data from neighboring sites and a relevant architecture of artificial neural networks (ANN) as well as adaptive neuro-fuzzy inference system (ANFIS). To be able to evaluate the results produced by these new techniques, two traditionally used methods including the normal ratio method and the correlation method were also employed. According to the results, although in some cases all four methods presented acceptable predictions, the ANFIS technique presented a superior ability to predict missing flow data especially in arid land stations with variable and heterogeneous data. Comparing the results, ANN was also found as an efficient method to predict the missing data in comparison to the traditional approaches.     

Landfill site selection using multi criteria decision making: Influential factors for comparing locations

Although a lot of research has focused on energy recovery and recycling of valuable materials from wastes to reduce loads on landfills, landfilling is still an inseparable part of solid waste management. Since landfills potentially pose a risk to human health and the surrounding environment, landfill site selection is an important endeavor that has to be carried out with great care. Choosing a suitable location for landfills depends on several factors and is a complicated procedure. In this paper, a comprehensive review of landfill site selection methods, with an emphasis on multi criteria decision making (multiple criteria decision analysis) has been presented. Assessments indicate that the most frequently used methods are weighted linear combination (WLC), ordered weighted averaging (OWA), analytic hierarchy process (AHP), fuzzy analytic hierarchy process (F-AHP), TODIM, fuzzy TODIM, analytic network process (ANP), fuzzy-analytic network process (F-ANP), and grey systems theory, each of which is discussed. The most widely used factors for selecting a landfill site are groundwater depth, surface water vicinity, elevation, land slope, soil permeability, soil stability, flooding susceptibility, lithology and stratification, faults, land use type, nearby settlements and urbanization, cultural and protected site vicinity, wind direction, roads, railways, proximity to building materials, pipelines and powerlines, and proximity to airports.     

Workstation design in carpet hand-weaving operation: guidelines for prevention of musculoskeletal disorders.

Carpet weavers suffer from musculoskeletal problems mainly attributed to poor working postures. Their posture is mostly constrained by the design of workstations. This study was conducted to investigate the effects of 2 design parameters (weaving height and seat type) on postural variables and subjective experience, and to develop guidelines for workstation adjustments. At an experimental workstation, 30 professional weavers worked in 9 different conditions. Working posture and weavers' perceptions were measured. It was shown that head, neck and shoulder postures were influenced by weaving height. Both design parameters influenced trunk and elbows postures. The determinant factor for weavers' perception on the neck, shoulders and elbows was found to be weaving height, and on the back and knees it was seat type. Based on the results, the following guidelines were developed: (a) weaving height should be adjusted to 20 cm above elbow height; (b) a 10 degrees forward-sloping high seat is to be used at weaving workstations.     

Assessment of land cover changes & water quality changes in the Zayandehroud River Basin between 1997–2008

Water quality of rivers is strongly influenced by landscape characteristics of their watershed, including land use /cover types, and their spatial configuration. This research evaluates the effects of land cover changes on the water quality of the Zayandehroud River, which is the most important river in the center of Iran. The main goal of this study was to quantify the change in rangelands, forests, and bare lands in the Zayandehroud river basin, which suffered intense human interference, in a period of 11 years (1997–2008), and to evaluate how landscape patterns (including the number of patches, edge density, percentage of rangelands, forests, and bare lands) influence on the 14 water quality indices (including BOD5, EC, NO3, P, and TDS) measured in 10 stations along the river. Results showed that from 1997 to 2008, bare lands increased from 5.8 to 20 %, while rangelands decreased from 70 to 55 % in the whole basin. The results indicated that water quality was significantly correlated with both the proportions and configuration of rangeland and bare land areas. The total edge (TE) of rangeland area had positive effects on water quality, especially on BOD5 and EC. Percentage of landscape (PLAND) and largest patch index (LPI) metrics of rangeland had positive effect on decreasing nutrient (NO₃, PO₄). The results showed that water quality was more likely degraded when there was high edge density (ED) of bare lands. Results of this study also revealed that degradation of rangeland lead to the degradation of water quality. Finding of this study highlights the importance of rangeland conservation in water quality management at landscape scale.