Validation and global uncertainty of a gas chromatographic with mass spectrometry method for fenamidone analysis in grapes and wines

Fenamidone is an imidazolinone fungicide recently introduced in viticulture practices. This work reports the validation and assessment of global uncertainty of a gas chromatographic with mass spectrometry method to analyze fenamidone in grapes and wines. This method consists in a simple and fast liquid-liquid extraction step followed by chromatographic determination. Limits of detection for fenamidone in grapes and wines were, respectively, 0.05 mg/kg and 0.06 mg/L, precision was below 9.4% and average recovery was 89 +/- 5%. In the concentration range from 0.05 to 1.00 mg/kg (or mg/L) of fenamidone, global uncertainty calculated following the EURACHEM/CITAC rules, and also by the Horwitz function, was below 25%. The EURACHEM/CITAC global uncertainty budget used gave lower estimates than those obtained from the Horwitz function.     

Soil Respiration and Carbon Storage of an Acrisol Under Forest and different Cultivations in rio de Janeiro State, Brazil

Soil respiration rates of a clay-loam textured Acrisol under different uses (Atlantic forest, manioc, horticulture and pasture) from Rio de Janeiro State were measured. The relationship between carbon dioxide (CO₂) emissions and soil physico-chemical properties were investigated. Rates of CO₂ emission of two sites (Atlantic forest and horticulture) were also evaluated in different seasons in 1997 and 1998. In the forest site, monthly means of measured respiration rates showed good correlation with soil temperature in the range 19.6–24.1°C (r² = 0.89). In the horticulture site, no change was observed with soil moisture alone, in the range 3.0–13.2 wt%. In the horticulture soil, even when the surface soil was very dry, respiration rates increased in the hot, wetter summer but remained higher than the mean flux from forest soil. The CO₂ emission flux of the Acrisol under different use showed good correlation with soil temperature (r² = 0.72) and moisture (r² = 0.61).     

Use of organic coagulant/flocculant for treatment of effluents generated in intensive rearing of swine

Separation of water for reuse is essential in an effluent treatment system, especially in activities with high water consumption, such as a pig production system. The objective of this work was to evaluate the efficiency of Tanfloc SG^® coagulant tannin/organic flocculant used to treat effluent generated during the intensive rearing of swine. For the evaluation, laboratory and in situ tests (field test) were performed. The laboratory tests were performed to define the concentration (1 and 16%), dosage (0, 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 2.0, 4.0, 8.0, and 16.0 milliliters of the solution), and time (24, 48, 72, and 96 hours) of coagulation/flocculation treatment of the solid portion of the effluent. The parameters pH, turbidity, oxidation reduction potential, dissolved oxygen, and electroconductivity (in microsiemens per centimeter) were evaluated using a multiparameter probe and the parameters ammonia (NH₃), nitrate (NO₃), and nitrite (NO₂) in the laboratory, in relation to the coagulation/flocculation time of the solid part of the effluent. The use of tannin as a coagulant/flocculant of plant origin in the treatment of swine effluents was effective in reducing turbidity and concentrations of ammonia, nitrite, and nitrate, and it allowed separation of the solid–liquid phase in approximately 68% as liquid phase.     

Comparison between EMINENT and other energy technology assessment tools

Currently, issues related with climate change, security of energy supply, energy efficiency and sustainability are at the core of all energy policies and strategies. The current technologies are not able to face this challenge; therefore, the development of new and more sustainable energy technologies must be supported.As part of this, energy technology assessment tools can help decision-makers in the identification and evaluation of sustainable energy solutions, in order to integrate them in long term energy strategies.The EMINENT tool was developed to assess the performance and market potential of early stage technologies (EST) in a pre-defined energy chain, under national conditions, in terms of financial, energy and environmental criteria.This paper presents a comparative study between EMINENT and other tools for energy technology assessment. The tools analysed were CO2DB, MARKAL, IKARUS and E3Database.Although there are many different energy technology assessment tools, EMINENT seems to be the only one targeting EST.     

Smart nanopackaging for the enhancement of food shelf life

Environmental Chemistry Letters - Food spoilage is a major global concern due to the lack of proper packaging technology. Nanotechnology is expected to improve food packaging. Indeed, novel...     

Relationship between biogenic amines and free amino Acid contents of wines and musts from Alentejo (Portugal)

The concentration of biogenic amines and free amino acids was studied in 102 Portuguese wines and 18 musts from Alentejo demarcated (D.O.C.) regions. Most wines were commercial, except for 38 monovarietals obtained by micro vinification. Musts from the varieties used to produce the latter wines were also studied. Both biogenic amines and free amino acids were analyzed by HPLC using fluorescence detection for their o-phthalaldehyde/fluorenylmethyl chloroformate (OPA/FMOC) derivatives. The most significant amines (average 10.8 mg/L for histamine+tyramine in red, and 7.4 mg/L for white wines) were found to be present at low levels and, although no important relationship between each individual biogenic amine could be obtained, the total amine content depends significantly on the assimilable amino acid content in wine.     

Ecodesign of automotive components making use of natural jute fiber composites

Nowadays, the world faces unprecedented challenges in social, environmental and economical dimensions, in which the industrial design has showed an important contribution with solutions that provide positive answers regarding these problems. In particular, due to its relevance, the automotive industry confronts a moment of crises, and based on the ecodesign of products it has been transforming the challenges in opportunities. In this context, the use of natural fiber composites, produced in developing countries, have presented several social, environmental and economical advantages to design “green” automotive components. Thus, this work through LCA method demonstrates the possibility to use natural fibers through a case study design which investigates the environmental improvements related to the replacement of glass fibers for natural jute fibers, to produce a structural frontal bonnet of an off-road vehicle (Buggy). Results pointed out the advantages of applying jute fiber composites in Buggy enclosures.     

Tolerance to iron accumulation and its effects on mineral composition and growth of two grass species

This study aimed to assess the influence of excess iron on the capacity of accumulation of this heavy metal, mineral composition, and growth of Setaria parviflora and Paspalum urvillei. Seedlings were submitted to 0.009; 1; 2; 4; and 7 mM of Fe-EDTA. In both species there was an increase in the concentration of Fe, Zn, P, and Ca and a decrease in Mn, K, and Mg in the iron plaque. Both species accumulated more iron in roots. In the shoots, S. parviflora showed higher iron content, except at 7 mM. Iron altered the contents of Fe, Cu, K, and Mg in roots, and of Fe, Mn, Zn, N, P, K, Ca, and Mg in shoots. The two species tolerated high iron concentrations and accumulated high content of this element in both shoots and roots. The iron did not reduce their growth. Both species are indicated for studies aiming restoration of iron-contaminated areas.     

Nosing thin-walled tubes into axisymmetric seamless reservoirs using recyclable mandrels

This paper is focused on novel utilizations of raw materials and technologies for manufacturing lightweight metallic reservoirs. The objective is to develop an environmental friendly technology for producing gas and liquid storage reservoirs that ensures a more efficient utilization of raw materials and a better end-of-life management of products than other technologies currently used to fabricate metallic reservoirs.The proposed technology utilizes previously engineered single-stage nosing of thin-walled tubes using sacrificial (expendable) mandrels to develop a multi-stage process that makes use of recyclable mandrels for producing lightweight, axisymmetric, seamless reservoirs. Recyclable mandrels are cast from low melting point alloys, possess the ability to continuously adapt its shape to that of the preforms and are easily removed by melting, while leaving the reservoir intact, at the end of the process.The prospects for eliminating the welding routes commonly used in the fabrication of reservoirs and for remelting and recycling the mandrels, results in significant economic and time savings and offers potential for opening new markets for the production of low-cost seamless reservoirs.The presentation is supported by experimentation and numerical modelling based on independently determined mechanical properties of the materials with the purpose of understanding the deformation mechanics and identifying the major operating parameters of the proposed technology.     

Adsorption behavior of α -cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of α -cypermethrin [R)-α -cyano-3-phenoxybenzyl(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-α-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze α -cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time—24 hours for both cork (1–2 mm and 3–4 mm) and GAC. For the studied α -cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1–2 mm have the maximum amount of adsorbed α-cypermethrin (q_m) (303 μg/g); followed by GAC (186 μ g/g) and cork 3-4 mm (136 μg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the α -cypermethrin adsorption phenomena on GAC, while α -cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing α -cypermethrin from water.