Total metal levels in crayfish Astacus leptodactylus (Eschscholtz, 1823), and surface sediments in Lake Terkos, Turkey

The aim of this study was to determine the total metal accumulation (aluminium, copper, manganese, lead, cadmium and iron) in different organs and eggs of Astacus leptodactylus (Eschscholtz, 1823) and sediments total metal contents (aluminium, copper, manganese, lead, cadmium, iron, zinc, chromium, nickel) in Lake Terkos. Water and sediment samples were collected from two stations at two different depths (1 and 2 m) of Lake Terkos in May 2008. Crayfish samples were collected by trammel net at the same region. Primary hydrographic conditions, such as temperature (13.6–19.4°C), salinity (0.27–0.34‰), dissolved oxygen (7.04–12.30 mg l^???1) and pH (7.42–8.51), were recorded for each sampling point. Moreover, the total organic carbon (1.65–5.44%) and the total calcium carbonate contents (19.44–41.16%) of sediment samples were determined. According to the Turkish Food Codex (J Zool 26:283–288, 2002), the maximum allowable Pb and Cd levels in crayfish are 0.5 mg/kg wet weight. Accordingly, the Pb and Cd levels determined in A. leptodactylus samples are below this limit. However, when compared with the acceptable metal limits defined by WHO, Australian National Health and Medical Research Council and Ministry of Agriculture in United Kingdom (UK), it is clear that the Cu level is at the limit and the Cd results exceed the limit. When the metal contents in sediment samples from Lake Terkos are examined, it is seen that the Al, Fe, Mn, Ni and Cu contents are lower while Zn, Cr, Cd and Pb contents are higher than the crustal average values. The high values draw attention to the land-based domestic and industrial inputs. Lake Terkos sediments have high enrichment factors (EF) of Zn, Cr, Cd and Pb metals which corroborate this result. The low EFs of Fe, Ni and Cu are due to the natural (terrigeneous) inputs. Additionally, there is no Al, Fe, Ni and Cu metal enrichment in these lake sediments because of the low contamination factor (CF) values. However, it is moderately contaminated by Zn, Cr and Pb, and heavily contaminated by Cd.     

Assessment of environmental radioactivity for Batman, Turkey

The province of Batman, located in southern Anatolia, has a population of approximately 500,000. To our knowledge, there exists no information regarding the environmental radioactivity in this province. Therefore, gamma activity measurements in soil, building materials and water samples and an indoor radon survey have been carried out in the Batman province. The mean activity concentrations of the natural radionuclides (²²⁶Ra, ²³²Th and ⁴⁰K) and a fission product (¹³⁷Cs) were 35 ± 8, 25 ± 10, 274 ± 167 and 12 ± 7 Bq kg^???1, respectively, in the soil samples. The concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the selected building materials ranged from 18 to 48 Bq kg^???1, 8 to 49 Bq kg^???1 and 68 to 477 Bq kg^???1, respectively. All the calculated radium equivalent (Ra_eq) activity values of the building material samples are lower than the limit of 370 Bq kg^???1, equivalent to a γ-dose of 1.5 mSv year^???1. The activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in tap waters collected from the study area were determined with mean specific activity concentrations of 42 ± 15, 35 ± 9 and 524 ± 190 mBq L^???1, respectively. Indoor radon measurements were made at 95 dwellings in Batman using a CR-39 detector. The radon concentration levels were found to vary from 23 to 145 Bq m^???3. The arithmetic mean of the measured radon concentration levels was found to be 84 Bq m^???3 with a standard deviation value of 23 Bq m^???3. The measurement results obtained in this study did not significantly differ from those taken in other parts of the country. The data generated in this study can be used to determine whether the Batman province is in a normal or high background radiation area and provides a valuable database for future estimations of the impact of radioactive pollution.     

Solid waste management practices in Turkey

As an economically developing country, Turkey has very well operated integrated solid waste management applications structured on modern facilities, besides over 2,000 scattered open dump areas in the country. Integrated waste management applications seem eligible for the metropolitan cities like Istanbul and Izmit (Kocaeli). Attempts have not been encouraging for the scattered regional settlements using central storage sites due to financial shortages and received rejections from nearby settlements. Small-scale compact solid waste management systems with materials recycling and composting can be more suitable alternatives in the small-scale regional settlements. The major constituents of municipal solid waste are organic in nature and approximately a quarter of municipal solid waste is recyclable. Although paper, including cardboard, is the main constituent, the composition of recyclable waste varies strongly by the source or the type of collection point. Solid wastes need primary treatment in order to be suitable for incineration and composting. Turkey needs to give more emphasis on the usage of modern solid waste removal technologies to overcome the overgrowing solid waste disposal problems.     

Grading of Parameters for Urban Tree Inventories by City Officials, Arborists, and Academics Using the Delphi Method

Tree inventories are expensive to conduct and update, so every inventory carried out must be maximized. However, increasing the number of constituent parameters increases the cost of performing and updating the inventory, illustrating the need for careful parameter selection. This article reports the results of a systematic expert rating of tree inventories aiming to quantify the relative importance of each parameter. Using the Delphi method, panels comprising city officials, arborists, and academics rated a total of 148 parameters. The total mean score, the top ranking parameters, which can serve as a guide for decision-making at practical level and for standardization of tree inventories, were: Scientific name of the tree species and genera, Vitality, Coordinates, Hazard class, and Identification number. The study also examined whether the different responsibilities and usage of urban tree databases among organizations and people engaged in urban tree inventories affected their prioritization. The results revealed noticeable dissimilarities in the ranking of parameters between the panels, underlining the need for collaboration between the research community and those commissioning, administrating, and conducting inventories. Only by applying such a transdisciplinary approach to parameter selection can urban tree inventories be strengthened and made more relevant.     

Comparison of some quality properties of soils around land-mined areas and adjacent agricultural fields

When agricultural lands are no longer used for agriculture and allowed to recover its natural vegetation, soil organic carbon can accumulate in the soil. Measurements of soil organic carbon and aggregate stability changes under various forms of land use are needed for the development of sustainable systems. Therefore, comparison of soil samples taken from both agricultural and nearby area close to land-mined fields where no agricultural practices have been done since 1956 can be a good approach to evaluate the effects of tillage and agriculture on soil quality. The objective of this study was to compare tillage, cropping and no tillage effects on some soil-quality parameters. Four different locations along the Turkey–Syria border were selected to determine effects of tillage and cropping on soil quality. Each location was evaluated separately because of different soil type and treatments. Comparisons were made between non-tilled and non-cropped fallow since 1956 and adjacent restricted lands that were tilled about every 2 years but not planted (T) or adjacent lands tilled and planted with wheat and lentil (P). Three samples were taken from the depths of 0–20 and 20–40 cm each site. Soil organic carbon (SOC), pH ,electrical conductivity, water soluble Ca⁺⁺, Mg⁺⁺, CO₃^-2{\rm CO}_{3}^{-2} and HCO₃^-{\rm HCO}_{3}^{-}, extractable potassium (K⁺) and sodium (Na⁺), soil texture, ammonium (NH₄⁺{\rm NH}_{4}^{+}–N) and nitrate (NO₃–N), extractable phosphorous and soil aggregate stability were determined. While the SOC contents of continuous tillage without cropping and continuous tillage and cropping were 2.2 and 11.6 g kg⁻¹, respectively, it was 30 g kg⁻¹ in non-tilled and non-planted site. Tillage of soil without the input of any plant material resulted in loss of carbon from the soil in all sites. Soil extractable NO₃−N contents of non-tilled and non-cropped sites were greatest among all treatments. Agricultural practices increased phosphorus and potassium contents in the soil profile. P₂O₅ contents of planted soils were approximately 20 to 39 times greater than those of non-tilled and non-cropped soils at different sites. FTIR spectra showed that never tilled sites had greater phenol, carboxylic acid, amide, aromatic compounds, polysaccharide and carbohydrates than other treatments.     

Evaluation of different isotherm models,kinetic, thermodynamic,and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm.

The biosorption characteristics of Cu(II) ions from aqueous solution using Lobaria pulmonaria (L.) Hoffm. biomass were investigated. The biosorption efficiency of Cu(II) onto biomass was significantly influenced by the operating parameters. The maximum biosorption efficiency of L. pulmonaria was 65.3% at 10 mg/L initial metal concentration for 5 g/L lichen biomass dosage. The biosorption of Cu(II) ions onto biomass fits the Langmuir isotherm model and the pseudo-second-order kinetic model well. The thermodynamic parameters indicate the feasibility and exothermic and spontaneous nature of the biosorption. The effective desorption achieved with HCl was 96%. Information on the nature of possible interactions between the functional groups of the L. pulmonaria biomass and Cu(II) ions was obtained via Fourier transform infrared (FTIR) spectroscopy. The results indicated that the carboxyl (–COOH) and hydroxyl (–OH) groups of the biomass were mainly involved in the biosorption of Cu(II) onto L. pulmonaria biomass. The L. pulmonaria is a promising biosorbent for Cu(II) ions because of its availability, low cost, and high metal biosorption and desorption capacities.

Implications: Lobaria pulmonaria is a promising biosorbent for Cu(II) ions because of its availability, low cost, and high metal biosorption and desorption capacities. To the best of our knowledge, this is the first paper on the biosorption Cu by L. pulmonaria.     

Integrated model for renewable energy planning in Turkey

All economic sectors are associated with energy use; therefore, government organizations aim to supply sustainable energy for human needs and economic growth. In particular, increased environmental concerns of the public in Turkey have impacted policymaking for renewable energy (RE) management in Turkey. The primary objective for RE sources of the Turkish Ministry of Energy is to ensure that 30% of the share of electricity production is from RE resources in 2023. In this paper, the integrated multi-objective, multi-period linear programming model is presented to determine effective allocation of RE supply for seven different geographical regions in Turkey for the period of 2017 to 2024. The integrated model consists of two different stages. The first stage involves qualitative evaluations of RE sources for seven geographical regions. Analytical Hierarchy Process (AHP) is applied to determine criteria priorities and overall ratings of geographical regions across determined criteria for RE sources are computed. The second stage of the integrated model consists of a multi-objective, multi-period linear programming model. The proposed multi-objective linear programming model is coded in MPL (Mathematical Programming Language) and solved using the GUROBI 5.1.0 solver. The output of the integrated model presents the total supply amount of RE sources for geographical regions in planning period. The ε-constraints method is applied to compute the total supply amount of RE from geographical regions for the period of 2017 to 2024. In this study, a systematic decision-making model is generated to allocate renewable energy sources to the geographical regions. The presented model integrates qualitative evaluations and quantitative parameters of different geographical regions to determine the optimal supply amount of RE. The obtained results are consistent with the potential quantities of RE alternatives in geographical regions, regional specifications, and social requirements.     

Kinetic behavior of anti-inflammatory drug ibuprofen in aqueous medium during its degradation by electrochemical advanced oxidation

The electrochemical abatement of the drug ibuprofen (2-(4-isobutylphenyl)propionic acid) from aqueous solution has been carried out by anodic oxidation. The electrolyses have been performed at constant current using a small, undivided cell equipped with a Pt or thin-film boron-doped diamond (BDD) anode and a carbon-felt cathode. The results have shown that ibuprofen has been destroyed under all the conditions tested, following pseudo-first-order kinetics; however, BDD enables higher removal rates than Pt, because the former produces greater quantity of ^?OH. Using BDD anode, the pseudo-first-order rate constant increased with applied current and when NaCl replaced Na₂SO₄ as supporting electrolyte, while it is almost unaffected by ibuprofen concentration. Mineralization of ibuprofen aqueous solutions was followed by total organic carbon (TOC) measurements. After 8 h of electrolysis, TOC removal varied from 91 % to 96 % applying a current in the range of 50–500 mA. The reaction by-products were quantified by chromatographic techniques, and in particular, aliphatic acids (oxalic, glyoxylic, formic, acetic, and pyruvic) have been the main intermediates formed during the electrolyses. The absolute rate constant for the oxidative degradation of ibuprofen have also been determined, by competition kinetic method, as 6.41?×?10⁹ M^?1?s^?1.     

Interaction between nitrogen and phosphorus cycles in mining-affected aquatic systems—experiences from field and laboratory measurements

The main objectives of this study were to (a) study the interaction between N and P cycles in mining-affected aquatic systems and (b) to quantify release rates of sedimentary soluble reactive phosphorus (SRP) that may be related to this interaction. Sediment cores and water from Lake Bruträsket (Boliden, northern Sweden) were collected and a time series of water sampling and flow measurements was conducted in the Brubäcken stream connected to the lake. Factors affecting SRP release were studied in a sediment incubation experiment and water column experiments. Field and laboratory measurements indicated that pH and dissolved oxygen are two important factors for SRP release. At the end of the low-oxygen incubation, an SRP concentration of 56 μg?L^?1 resulted in a sedimentary flux of 1.1 mg SRP?m^?2?day^?1. This is ～10 times higher than the flux of 0.12 mg SRP?m^?2?day^?1 obtained from depth integration of vertical SRP profiles measured in the lake, and ～100 times higher than the external flux of 0.014 mg SRP?m^?2?d^?1 into the lake (based on catchment area). Field measurements indicated that oxidation of organic matter and mining-related chemicals (ammonium and thiosulphates) may result in increased internal SRP flux from the sediment. Increased P loading in the lake as a result of low-oxygen conditions could change water column total nitrogen/total phosphorus ratios from 27 to 17, consequently changing the lake from being P-limited to be co-limited by N and P. The obtained findings point to possible interaction between the cycles of nitrogen (oxygen consumption) and P (flux from sediment) that may be important for nutrient regulation in mine water recipients.