Landfill leachate treatment with willows and poplars – Efficiency and plant response

Irrigation of willow and poplar short-rotation coppice with landfill leachate is an increasingly interesting treatment option. Minimal leaching to groundwater and disturbance to plant growth must be ensured, but in such systems, where various site-specific factors interact, a case-specific approach is needed to determine potential hazards. This paper compares the effect of leachate irrigation on willow grown in clay lysimeters and poplar grown in sand lysimeters. Leachate irrigation increased willow biomass production, but not that of poplar. Near-zero nitrate-N concentrations were found in drainage water for both species after 2 years of irrigation. Ability to retain total N and P, and TOC was relatively high for willow, taking into account the large amounts supplied, and better than for poplar. To reduce environmental risks the irrigation load should be reduced, but if leachate concentrations are reduced, the irrigation load can be as high as 6 mm/day.     

Carbon accumulation through ecosystem recovery

A market has emerged for carbon sequestered through reforestation. The opportunity to restore ecosystems through this market rather than establish plantations is demonstrated by an Australian case study. In the state of Queensland there are vast areas that have been cleared relatively recently and could be restored to ecosystems with high resilience and important biodiversity values with appropriate management. In order to foster opportunities for carbon accumulation through ecosystem recovery spatially explicit information on sequestration rates, management recommendations, and clear definitions of ancillary biodiversity benefits need to be defined.     

Early detection of fetal cardiac abnormalities: how effective is it and how should we manage these patients?

Congenital heart defects (CHDs), the most commonly occurring congenital malformations, cause significant mortality and morbidity. With the recognition of early markers for CHD and the development of better ultrasound resolution, interest has turned toward performing a screening anomaly scan, including the heart, together with the nuchal scan. It is also possible, with adequate skill and training, to competently perform an echocardiogram <16 weeks' gestation. This article reviews the detection of major CHD in the first trimester and early second trimester including specific markers that help to identify high-risk groups for early fetal echocardiography (EFEC). CHD detection during first-trimester screening is low (2.3–56%) depending on the center's experience and the population studied. An increased nuchal translucency, abnormal ductus venosus flow, and tricuspid regurgitation in the first trimester are associated with an increased CHD risk and can be used together to identify high-risk fetuses for EFEC. EFEC requires skilled scanning and the expertise of a fetal echocardiographer. In high-risk populations, it is 78.5% sensitive with a 74.5% concordance between the EFEC and the mid-gestational echocardiogram. The availability of qualified personnel and diagnostic accuracy are prerequisites before EFEC can be introduced into management protocols. The limitations of EFEC should be recognized, and a later confirmatory echocardiogram is recommended. © 2014 John Wiley & Sons, Ltd.     

Impacts of “metals” on human health: a comparison between nine different methodologies for Life Cycle Impact Assessment (LCIA)

This paper looks into the differences and uncertainties in determining the impact of “metals’” emissions on human health, in Life Cycle Impact Assessment (LCIA). Metals are diverse substances, with different properties and characteristics, considered important in LCIA because of their toxicity to humans and ecosystems. First, we defined a list of the most significant metals in terms of impacts on human health. This was done according to precise criteria accounting for both physical and toxic properties of the metals. Second, we performed an LCIA on different key processes using various existing LCIA methodologies and including also USEtox: the recently developed consensus-model for LCIA. Last, we compared the results in relative terms using a contribution analysis. The analysis showed poor or no agreement between the methods: the relative contribution of each metal and of the metals in total to the total impact on human health changes greatly according to the LCIA method used. These differences are due mainly to the number of metals included in each method and to the technique used to calculate the characterization factors. Results obtained with USEtox show no apparent correlation with results calculated with other methods. At present time USEtox is recommended as the best model for LCIA on human toxicity, but mainly because of the large consensus behind it, because its uncertainties regarding metals are still high. The study gives a good and simple overview regarding the way different methods address the impact assessment for metals, and helps in the interpretation of LCIA results for actual LCA studies where metal emissions are involved.     

The copper level dependence in vegetable crops at pesticide treatment

Abstract

Pesticides containing copper are used on wide range in vegetable production, especially in the open field. Copper has an excellent fungicidal effect against diseases of tomato, pepper, onion and in practical use it is essential as bactericide in the above mentioned crops.

The fungicides containing copper are freely available on the market, they are not expensive and widely used without any special knowledge. They are popular in simple home gardens as well as in hi‐tech vegetable production and are used even in all forms of “bio”; culture.

From the other side, copper can be toxic. The allowable level is 10 mg Cu/kg product. This concentration may be found after the first treatment and it increases after every further application.

In our experiments the copper absorbancy and accumulation has been investigated at different pesticide doses and under different experimental conditions.

The analytical measurements, the sample preparation, the instrument calibration have been made by the Inductively Coupled Plasma Spectrometer at the Department of Chemistry of the University of Horticulture and Food Industry.     

Treatment of hydrocarbon contamination under flow through conditions by using magnetite catalyzed chemical oxidation

Soil pollution by hydrocarbons (aromatic and aliphatic hydrocarbons) is a major environmental issue. Various treatments have been used to remove them from contaminated soils. In our previous studies, the ability of magnetite has been successfully explored to catalyze chemical oxidation for hydrocarbon remediation in batch slurry system. In the present laboratory study, column experiments were performed to evaluate the efficiency of magnetite catalyzed Fenton-like (FL) and activated persulfate (AP) oxidation for hydrocarbon degradation. Flow-through column experiments are intended to provide a better representation of field conditions. Organic extracts isolated from three different soils (an oil-contaminated soil from petrochemical industrial site and two soils polluted by polycyclic aromatic hydrocarbon (PAH) originating from coking plant sites) were spiked on sand. After solvent evaporation, spiked sand was packed in column and was subjected to oxidation using magnetite as catalyst. Oxidant solution was injected at a flow rate of 0.1 mL min^?1 under water-saturated conditions. Organic analyses were performed by GC–mass spectrometry, GC–flame ionization detector, and micro-Fourier transform infrared spectroscopy. Significant abatement of both types of hydrocarbons (60–70 %) was achieved after chemical oxidation (FL and AP) of organic extracts. No significant by-products were formed during oxidation experiment, underscoring the complete degradation of hydrocarbons. No selective degradation was observed for FL with almost similar efficiency towards all hydrocarbons. However, AP showed less reactivity towards higher molecular weight PAHs and aromatic oxygenated compounds. Results of this study demonstrated that magnetite-catalyzed chemical oxidation can effectively degrade both aromatic and aliphatic hydrocarbons (enhanced available contaminants) under flow-through conditions.     

Heavy metals contents of roadside mosses in the northern and south-eastern regions of Nigeria

Levels of lead, zinc, cadmium, copper and nickel were determined in roadside moss samples within towns in the northern and south-eastern regions of Nigeria. Average lead level in the south-east (59 ppm) was higher than the average for the northern region (44 ppm). Average levels of zinc, cadmium, copper and nickel did not differ significantly between the two regions, with overall averages for the entire study area being 50.9, 1.2, 11.3 and 5.6 ppm for these metals. Lead levels were poorly correlated with those of the other metals, indicating that automobile emissions may not be the main source for these metals in the moss. In comparison with a previous study of the south-west region, the results indicate a generally slightly higher level of metal pollution in the south-west region than in both the northern and south-eastern regions.     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.