Zinc and cobalt phytoextraction by different plant species

Plant species sorghum (Sorghum vulgar L.), clover (Trifolium pratense L.), panikum (Panicum antidotal), and canola (Brassica napus) were tested to determine their phytoremediation potential. After a period of about 90 days, plant samples (shoots and roots) and soil samples (before and after cultivation) were collected for zinc and cobalt analyses using atomic absorption spectrometry. The highest zinc uptake was observed in canola, while panikum grass showed a high zinc accumulation affinity compared to sorghum and clover. Calculation of the recovery percentage, based on the amount of zinc removed from the soil after cultivation, ranged between 12.8 and 36.3 percent of the total initial zinc. Canola shoots exhibited the highest cobalt uptake compared to the other plant species. Calculation of the recovery percentage based on cobalt removed from the soil after cultivation ranged between 10.1 and 40.7 percent of the total initial cobalt concentration. © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

     

Dissipation pattern and pre-harvest residue limit of abamectin in perilla leaves

The pre-harvest residue limit (PHRL) of abamectin (abamectin B1a and B1b) in Perilla frutescens leaves grown under greenhouse conditions were investigated using high-performance liquid chromatography with a fluorescence detector. Samples were extracted with acetonitrile. The extract was purified through a solid phase extraction procedure. Then the purified extract was derivatized with trifluoroacetic anhydride and N-methylimidazole to form a strong stable fluorescent derivative of abamectin. Finally, derivatized abamectins were conveyed to the detector via an Atlantis C₁₈ column, with water and methanol as a mobile phase. Calibration curves were linear over the calibration ranges with coefficients of determinants r ²?≥?0.999. The limits of detection and quantification were 0.0033 and 0.01 mg kg^?1 for abamectin B_1a and B_1b, respectively. Recovery was assessed in a control matrix at two different fortification concentrations, with three replicates for each concentration. Good recoveries were obtained for the target analytes and ranged from 82.11 to 93.03 %, with relative standard deviations of less than 8 %. The rate of disappearance of total abamectin on perilla leaves for recommended and double the recommended doses was described as first-order kinetics with a half-life of 0.7 days. Using the PHRL curve, we could predict the residue level of total abamectin to be 0.92 mg kg^?1 at 7 days before harvest or 0.26 mg kg^?1 at 4 days before harvest, which would be below the provisional MRL designed by the Korea Food and Drug Administration.     

Metal mobility during in situ chemical oxidation of TCE by KMnO4

The potential for trace-metal contamination of aquifers as a side effect of In Situ Chemical Oxidation (ISCO) of chlorinated solvent contamination by KMnO(4) is investigated with column experiments. The experiments investigate metal mobility during in situ chemical oxidation of TCE by KMnO(4) under conditions where pH, flow rate, KMnO(4), TCE, and trace-metal concentrations were controlled. During ISCO, the injection of MnO(4) creates oxidizing conditions, and acidity released by the reactions causes a tendency toward low pH in aquifers. In order to evaluate the role of pH buffering on metal mobility, duplicate columns were constructed, one packed with pure silica sand, and one with a mixture of silica sand and calcite. Aqueous solutions of TCE and KMnO(4) (with 1 mg/L Cu, Pb, Zn, Mo, Ni, and Cr(VI)) were allowed to mix at the inlet to the columns. After the completion of the experiments, samples of Mn oxide were removed from the columns and analyzed by analytical scanning and transmission electron microscopy. In order to relate the results of the laboratory experiments to field settings, the analyses of Mn-oxide samples from the lab experiments were compared to samples of Mn oxide collected from a field-scale chemical-oxidation experiment that were also analyzed by analytical electron microscopy as well as time-of-flight secondary-ion mass spectroscopy. The pH ranged from 2.40 in the silica sand column to 6.25 in the calcite-containing column. The data indicate that aqueous Mo, Pb, Cu and Ni concentrations are attenuated almost completely within the columns. In contrast, Zn concentrations are not significantly attenuated and Cr(VI) is transported conservatively. The results indicate that within the range 2.40 to 6.25, metal mobility is not affected by pH. Comparison of analyses of Mn-oxide from the lab and field demonstrate that a variety of metals are sequestered from solution by Mn oxide.     

Evidence of hydrocarbon contamination from the Burgan oil field, Kuwait: interpretations from thermal remote sensing data

The paper presents the application of thermal remote sensing for mapping hydrocarbon polluted sites. This has been achieved by mono-window algorithm for land surface temperature (LST) measurements, using multi-date band 6 data of Landsat Thematic Mapper (TM). The emissivity, transmittance and mean atmospheric temperature were used as critical factors to estimate LST. The changes in the surface emissivity due to oil pollution alter the apparent temperature, which was used as a recognition element to map out oil polluted surfaces. The LST contrast was successfully used to map spatial distribution of hydrocarbon pollution in the Burgan Oil field area of Kuwait. The methodology can be positively used to detect waste dumping, oil spills in oceans and ports, besides environmental management of oil pollution at or near the land surface.     

MATHEMATICAL MODELING OF VEGETATIVE IMPACTS FROM FLUCTUATING FLOOD POOLS1

ABSTRACT: A flood control reservoir protects valuable developments on the downstream flood plain by storing flood waters and releasing them at a rate that will reduce the downstream damage. The water surface level of the flood pool behind the dam can fluctuate considerably during the occurrence of a large magnitude flood causing severe impacts on shoreline vegetation and water based recreation facilities located in the flood pool. A mathematical simulation model describing shoreline vegetative succession in response to flooding is presented. Plant species are grouped into ecologically similar compartments. Differential equations describing compartment intrinsic growth, intraspecies competition, interspecies competition, and other growth limiting factors are solved numerically. The model is used to evaluate the impacts of various operating policies on plant succession for a new reservoir in Central Iowa.     

THERMAL MAPPING OF STREAMS FROM AIRBORNE RADIOMETRIC SCANNING1

This paper begins with a brief review of radiation theory as applied to water temperature determinations. Errors introduced in “radiant” temperature measurements due to nonblackness of the water surface and the effects of the atmosphere are included in this discussion. The airborne scanner system is described. Analysis and display of scanner data using the Laboratory for Applications of Remote Sensing (LARS) display system are discussed. Thermal maps of four sections of the Wabash River are included and points of interest of each map are discussed in the text.     

A comparison of methods and materials for the analysis of leaded wipes

The purposes of this study are: (1) to determine whether proficiency analytical test (PAT) materials from the American Industrial Hygiene Association can be used to provide quality data for portable X-ray fluorescence analysis (XRF) of lead in dust wipe surface samples; (2) to provide data to determine whether the on-site analysis of field dust wipe samples by XRF and the laboratory method of inductively coupled plasma emission analysis (ICP) are comparable; and (3) to determine if differences exist between different wipe materials. Several wipes meet the ASTM E1792 performance requirements of lead background level less than 5 microg per wipe, be only one layer thick, yield recovery rates of 80- 120% from spiked samples, remain damp throughout the sampling procedure, and do not contain aloe. The wipes used in this study were Pace Wipes, which are used for the PAT materials, and, for the field samples, Palintest Wipes, which were supplied by the instrument manufacturer, and Ghost Wipes, which are popular because they digest in hot, concentrated acid, so that chemical analysis is simplified. Twenty PAT wipe samples were obtained from four different proficiency test rounds. Surface wipe samples were taken at three different locations representing different industry types. All samples were analyzed using a portable XRF spectrometer and by ICP. Strong linear relationships were found for the analysis of wipe samples by ICP and by portable XRF. For the PAT samples, the results from the ICP and XRF analysis were not statistically equivalent, which indicates a bias in the ICP analysis. The bias was not excessive, since all ICP analyses fell within the acceptable range for the proficiency samples. The good correlation between the proficiency sample reference values and the XRF determinations is not surprising considering similar proficiency samples were used to calibrate the instrument response. Users of this portable XRF analyzer could enroll in the proficiency test program as part of their quality assurance program. For field samples, the relationship was strongest for Palintest wipes, and the values found for all three industries could be combined. However, the results from the ICP and XRF analysis were not statistically equivalent using the correction factor in the calculation algorithm as supplied with the instrument, and a new coefficient was derived. The mean relative error for the XRF analysis versus the ICP analysis was greater than 25%, such that the method falls within the realm of screening procedures. For Ghost Wipe samples, the precision was different for different industries, and the results could not be pooled. Differences between the two wipe materials may be related to the number of folds required for analysis.     

Assessment of Groundwater Quality in a Structurally Deformed Granitic Terrain in Hyderabad, India

Geochemical study of groundwater from a structurally deformed granitic terrain near Hyderabad (India) was carried out to understand and evaluate the hydrogeochemical processes and quality of groundwater. Several trace elements (Fe, Mn, Be, Al, V, Cr, Co, Ni, Cu, Zn, As, Sr, Mo, Cd, Sb, Ba, Pb, U) along with major ions and minor elements were precisely estimated in shallow and drilled wells to know the suitability of water for drinking and irrigation purposes. Analytical data shows that pH and major ion chemistry in dug wells and bore wells do not vary significantly, while some trace elements (Fe, Mn, Al, Be, Co, Pb, U and Zn) vary in dug wells and bore wells, which can be attributed to differential mineral weathering and dissolution/precipitation reactions along fractures/joints. Although the water is not potable, it was found to be suitable for irrigation with little danger in the development of harmful level of exchangeable sodium. It is inferred that the chemical composition of the groundwater in this region is likely to have its origin from silicate weathering reactions and dissolution/precipitation processes supported by rainfall and groundwater flow.